1. Choose model
RX/SX 125 (from 2025, XS)
RX/SX 125 (2021 to 2024, KT - Euro5)
RX 125 (2018 to 2020, KXA - Euro4)
2. Filter by category
No results were found for the filter!
This article is an original spare part (OEM) from Aprilia Scope of delivery: 1 piece OEM part number for comparison purposes : 1A003109 Scope of delivery: 1
Almost gone
€1.99
*
This article is an original spare part from Aprilia OEM part number for comparison purposes : 2R000049 Scope of delivery: 1
Available
€2.99
*
Scope of delivery 1 piece. Aprilia original spare part. Dimension: M8x20 Key: Torx® OEM part number for comparison purposes Aprilia: 2B004309
Available
€2.69
*
Pinion replacement bolt, scope of delivery 1 piece. OEM part number: 00000004510
Available
€0.89
*
Aprilia OEM oil dipstick (incl. seal) OEM part number: 874676
Almost gone
€10.99
*
This item is an original spare part from the Piaggio brand. OEM part number for comparison purposes: CM001907
Available
€1.99
*
Ball bearing / wheel bearing, Type: 6005 2RS
Single ball bearing / wheel bearing for various vehicles. Please compare the bearing sizes with the standard bearings of your bike before ordering. Technical data Inner diameter: 25mm Outer diameter: 47mm Width: 12mm Sealed on both sides
Available
€2.99
*
Einzelnes Radlager für die Hinterradfelge von bspw. Aprilia RX/SX 125. Für den fachgerechten Austausch müssen unbedingt beide Lager der Hinterachse erneuert werden! Daher bitte 2 Stück bestellen! OEM Artikelnummer zu Vergleichszwecken...
Available
€12.95
*
Mounting bracket Schmitt, universell
Universal with rubber buffer, e.g. for radiators, tanks, custom panels etc...
Almost gone
€9.99
*
Incl. sealing ring. OEM part number for comparison purposes Aprilia / Piaggio: 826165
Almost gone
€17.90
*
Standard M5 sheet metal nut for fastening most common fairing screws.
Available
€1.99
*
Locking bolt cylinder head Most Racing, M12x1,5, versch. Colors
The aluminum locking bolts with thread size M12x1.5 and matching copper sealing ring are the perfect solution for closing holes, such as the temperature sensor hole on Derbi Euro4 models. Of course, the bolt is also suitable for other...
Available
€17.95
*
;
From €9.99
*
Locking bolt cylinder head Most Racing, M14x1,5, versch. Colors
This high quality aluminum sealing bolt with thread size M14x1.5 and matching copper sealing ring is an indispensable accessory for anyone looking for a reliable and durable sealing bolt. With its versatility, this bolt is perfect for...
Available
€17.95
*
;
From €9.99
*
This item is an original Piaggio replacement part. It is a simple T-fitting for connecting different hoses. It can be used, for example, for fuel and coolant lines. Dimensions: Large outer diameter: 9.93 mm Small outer diameter: 4.98 mm
Available
€11.99
*
Hollow head screw, Magnetic, black, various Versions
Dimensions: M8X1.25 -20mm M8X1.25 -25mm M8X1.25 -35mm M10X1.25 -16mm M10X1.5 -15mm M10X1.5 -22mm M12X1.25 -10mm M12X1.5 -15mm M12X1.5 -12mm M8X1.5 -16mm M8X1.25 -15mm Scope of delivery: incl. copper gasket
Available
€11.99
*
;
From €9.59
*
Needle roller bearing / Gearbox bearing / Shift drum bearing / Shaft bearing, universal, 10x10x14
This article is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and connections. It can be used in different places of different bikes. OEM part number for comparison...
Available
€2.99
*
Gearbox bearing / Needle roller bearing / Shift shaft bearing, universell, 12x16x10
This item is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and connections. It can be used in different places of different bikes. OEM part number for comparison...
Available
€2.99
*
This article is an original spare part (OEM) from Piaggio OEM part number for comparison purposes : PIA-CM001909 Scope of delivery: 1
Available
€2.12
*
This article is an original spare part (OEM) from Piaggio OEM part number for comparison purposes : PIA-B016808 Scope of delivery: 1
Available
€1.49
*
Thread repair insert, M14 for thread spark plug / cylinder head
Thread insert - also known as threaded bush - for repairing defective spark plug threads M14x12.7mm on the cylinder head. The defective original thread is extended to M18. To do this, the old thread is drilled out to 16.5mm with a drill...
Available
€4.99
*
Replacement spring for preloading the rider footrest. This spring is needed to ensure the automatic unfolding of the footrest. This item is a original spare part (OEM) of the manufacturer of the brand Piaggio.
Available
€3.99
*
The cross-head of the coupling screws is known to quickly spin out. At some point it becomes difficult to unscrew or properly tighten the screws at all. The only remedy is new screws. Here we can offer a set consisting of 5 pcs. original...
Available
€3.99
*
Cap nuts / trim nut set, M7, 4 Stck
These nuts are suitable for use as cylinder head nuts, for example.
Almost gone
€5.99
*
Hose clamp for fixing the carburettor in the intake manifold or to fix air filter hoses or similar. Original Piaggio spare part, but universally applicable on any other vehicle model. OEM for comparison 842202
Out of Stock
€2.50
*
Viewed