Presto Rust Converter Spray Rust Converter and Primer in one step. This rust restoration system based on epoxy resin forms a metallic-organic iron complex with the neutralised rust layer. This black, very compact protective layer serves as a primer and is the basis for the subsequent, permanent painting.
Excellently suitable for the renovation of older scooters and other vehicles of all kinds.
Anti-corrosive, reliable rust protection and rust converter
Rust is converted into water-insoluble, black, organic iron complexes. This iron complex compound is stabilized by a special epoxy resin, whereby the iron is protected from external influences.
Perfect film formation
Very good creep ability
Easy to spray on
Compatible with all commercial fillers, fillers and top coats
When using 2-component lacquers, a compatibility test is recommended
Very good solvent resistance
Free of heavy metals, free of mineral acids
No aggressive smell
Base: Epoxy resin
Odour: after solvent
Depending on the condition and colour of the surface
400 ml for approx. 1.6 m²
Drying (at 20°C, 50% relative humidity):
Dust dry: after approx. 1 hour
Can be painted over: After earliest 6 hours air drying (fingernail dry!)
The drying time depends on the ambient temperature, the air humidity and the applied quantity.
dry film thickness: 40 - 50 mµ with 3 - 4 layers
pH value: 4 - 4.5 according to DIN 53785
Solid content: approx. 16 % according to DIN 53216
Density: 0.9 kp/dm³ according to DIN 53785
Viscosity (25°C): approx. 37 centistokes
Temperature resistance: permanently up to 80°C (short-term < 15 min up to 160°C)
Shelf life/storage: 10 years with proper storage (=10°-25°C, relative humidity of max. 60%)
This article may only be sold to persons over 18 years of age.