No results were found for the filter!
Hose clamp, universal, 8 x 300mm
Practical set for assembling hose clamps yourself. Consisting of 8 screw clips and a 30cm long steel band. The band can be torn off in the desired length, then only the clip is attached and the clamp is ready for use. Notes Cut the tape...
Available
€5.99
*
Melon stickers "Greta!", 29,7x10,5cm
Also for the winter season we offer the right sticker for your fruit. Give your melon a name and make it an eye-catcher. Ideal for outdoor use and thanks to a special coating it is easy to remove. Disclaimer We explicitly point out that...
Available
€0.15
*
Available
€0.50
*
Special screwdriver, for plugged oil filters
The screwdriver has a self-tapping thread at the tip and can therefore be screwed into the oil filter and allows removal.
Almost gone
€15.99
*
Collar nut, M10 x 1.25 mm, with fuse, universal
Universal nut. Used on some vehicles, for example as a sprocket nut.
Available
€2.99
*
Chain wheel bolt, universal, M8x1,25x40mm
Stud bolt for universal use. Used on some vehicles, e.g. for fastening the chain wheel. (Yamaha MT 125 & YZF-R 125)
Available
€3.99
*
throttle cable adjusting screw, M6, Universal
Almost universally applicable adjusting screw for throttle cables. Thread: M6 Inner diameter: 6 mm
Available
€2.99
*
Drain plug Oil/ dummy plug Coolant temperature, M14x1.5
M14 screw with 1.5 thread pitch. Can be used e.g. as drain plug for engine oil.
Available
€2.79
*
Available
€1.59
*
Outlet screw set, Cross/ 10 hexagon socket, M6 x 16mm (pair)
Exhaust bolt set for almost all common motorcycles. Can be mounted with a 10 mm wrench and a Phillips screwdriver. Dimensions: M6 x 16mm. Delivered are 2 pieces.
Available
€3.59
*
Screw, M4, hexagon socket
Is used by some manufacturers, for example, to secure the sprocket. But it can also be used to secure other things like any other screw.
Available
€1.99
*
Fuel tap, universal, M16 x 1,5
Largely universal, vacuum-controlled petrol tap with screw connection. The scope of delivery also includes the pre-filter (tube), which sits in the petrol tap. Suitable for all petrol tanks with corresponding thread & vacuum connection....
Available
€10.99
*
Collar nut M8x1,25, Universal
Universal standard nut, can be used for anything. It is used for example as a sprocket nut on some vehicles. OEM part number for comparison purposes 92015-1022
Available
€1.59
*
Cable tie assortment, 25x2,5mm, assorted colours, 100 pcs.
100 colour assorted cable ties in black, red, blue and yellow.
Almost gone
€6.39
*
Cable tie assortment, 200x4,6mm, assorted colours, 100 pcs.
100 colour assorted cable ties in black, red, blue and yellow.
Available
€7.99
*
Hose clamp assortment, 50 parts
Galvanized steel hose clamps with worm thread for attaching hoses to pipes and hose nozzles. Including 8mm socket wrench. Sizes: 12 x 13-19mm 12 x 16-22mm 10 x 18-27mm 7 x 20-32mm 5 x 22-38mm 3 x 24-44mm
Available
€27.95
*
Available
€0.99
*
Available
€1.99
*
Available
€6.49
*
Available
€6.49
*
Replacement bulb Original Replica, 12V 21W BA9S, for e.g. indicators
Spare flasher bulb with 12V/21W BA9S connection. Colour: white.
Available
€1.99
*
Screw set windscreen, Universal, 8pcs.
8 replacement screws for the windscreen of racing mopeds. Nuts included.
Available
€12.99
*
brake lever, Yamaha DT 125 year 97-02, silver
A lever in the corresponding colour will be delivered. OEM reference number: 3RN-83922-0 General note on brake or clutch levers Vehicle manufacturers use different brake and clutch systems within the years of manufacture. This means that...
Almost gone
€12.99
*
Clutch lever, Aprilia RS 125 from year 06, Derbi GPR 125
The lever is 100% identical to the original in design, size, colour and mounting. Simply exchange and finished. A lever in the corresponding colour is supplied. OEM numbers: 00H00904291 / N110202A8 / 57621-33E00 / 57621-33E01 /...
Almost gone
€10.99
*
Viewed