No results were found for the filter!
Cylinder head valve kit, Minarelli YI 125cc Euro3/4 (e.g. Yamaha YZF-R, MT, WR / Beta RR and many more)
The valve kit for YI engines includes all the necessary components for updating your cylinder head. The scope of supply includes 2 intake valves with a diameter of 23 mm and 2 exhaust valves with a diameter of 21 mm. These valves are...
Available
€75.90
*
Handlebar, Brixton BX 125, 22mm, steel, black
Outer diameter: 22 mm Width: 800 mm Color: black matt Inner diameter: 18 mm Material: steel
Available
€79.95
*
Chain guide, Fantic XME/XMF from model year 17 onwards
The advantage of this design is that when replacing a worn chain no cutting of the chain guide is required. Protects chain and swingarm equally from damage and unnecessary wear.
Available
€26.95
*
Rear lowering, Aprilia RX/SX 125 from year 18, with ABE
There are various reasons to lower the rear of your bike. The 2 most popular are certainly the visual differentiation from motorcycles of the same design and less difficulty for smaller people. This product can be used to lower your...
Available
€139.90
*
Spring deflection side stand, Fantic Enduro/Motard years of construction 17-20, XME/XMF from year of construction 21...
This item is a low-priced alternative to the expensive original spare part. The deflection corresponds to the original in shape and dimensions. OEM number for comparison purposes 02017005
Available
€5.49
*
Cylinder head gasket, Minarelli YI 125cc Euro3/4 (e.g. Yamaha YZF-R, MT, WR / Beta RR and many more)
This item is a cheap alternative to the expensive original spare part. The seal corresponds to the original in dimensions and function.
Available
€7.99
*
Rear lowering, Yamaha YZF-R from year 19, MT from year 20, with ABE
There are several reasons to lower the rear of his machine. The 2 most popular are certainly the visual distinction from identical motorcycles and less difficulty for smaller people. With this product, your Yamaha can be lowered by 35mm....
Almost gone
€139.90
*
Bearing set, Minarelli YI-3 engines (e.g. YZF-R, WR, MT 125 My. 08-16), 11 pieces
This article is a cheap alternative to the expensive original spare part. The bearings correspond to the original in dimensions and function. This set includes the bearings for gearbox, camshaft, clutch etc. ⚠️Achtung: The crankshaft...
Available
€36.90
*
Ball bearing camshaft 6906, 30x47x9mm, YI-3 motors
This item is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and function. Ball bearing open 6906 - 30x47x9mm suitable for the camshaft for YI-3 OHC engines.
Available
€3.99
*
Cylinder head revision kit, Big Bore, YI-3 Motoren
This is a set of spare parts for Big Bore cylinder heads, such as NK600.75 . So if your tuning cylinder head is struggling with worn parts, you do not need a new one directly. ⚠️The matching valves for the cylinder head must be ordered...
Out of Stock
€149.90
*
Cylinder head valve kit, Minarelli YI 125cc Euro3/4 (e.g. Yamaha YZF-R, MT, WR / Beta RR and many more)
A cylinder of 4-stroke engines is controlled by several valves. These in turn are driven by the camshaft and open or close the respective combustion chamber of the engine. Losses of compression pressure in the cylinder can in many cases...
Almost gone
€74.90
*
Crankshaft bearing set, Rotax 122/123, Aprilia RS 125, RX/SX 125
Replacement crankshaft bearings for the Rotax 122 & 123 engine. Scope of delivery Incl. both main bearings, a new piston pin bearing and the two crankshaft seal rings. Bearing type: 6206 C3
Out of Stock
€41.95
*
Cylinder head Ceramic 150cc, Yamaha / Minarelli YI- Engines
This cylinder head is an optimized version of the original head with larger intake & exhaust valves (19 & 22mm). Due to the enlarged valves, the filling in the cylinder can be improved, which thus also immediately leads to an increase in...
Almost gone
€415.90
*
Replacement brake lever, Brixton BX 125, black
If your brake lever is worn or broken due to an accident / accident, you hereby get a one-time replacement. Dimensions: Brake lever mounting: 8 mm Length: 184 mm
Available
€29.90
*
Adapter cable accessory turn signal, Kawasaki Various Models
This adapter cable facilitates the installation of accessory turn signals with round plugs immensely! Because a cut and rewire old plugs is thus a thing of the past. The adapter cables supplied in pairs are equipped on one side with...
Available
€14.95
*
Adapter cable f. accessory turn signal, Honda Various Models
This adapter cable facilitates the installation of accessory turn signals with round plugs immensely! Because a cut and rewire old plugs is thus a thing of the past. The adapter cables supplied in pairs are equipped on one side with...
Out of Stock
€14.95
*
Adapter cable accessory turn signal, Suzuki Various Models
This adapter cable facilitates the installation of accessory turn signals with round plugs immensely! Because a cut and rewire old plugs is thus a thing of the past. The adapter cables supplied in pairs are equipped on one side with...
Out of Stock
€14.95
*
Coupling fitting, Brixton BX 125
This article is a cheap alternative to the expensive original spare part. The fitting can simply be replaced one to one.
Almost gone
€49.90
*
Intake valve Honda OEM, Honda KPP1 Motoren
Intake valves open and close the intake for air or the air-fuel mixture. So a faulty intake valve will cause your engine to malfunction. This is not a common but particularly annoying problem. Herewith we offer you an original spare...
Almost gone
€55.95
*
;
€39.16
*
Cylinder, Brixton BX 125, 56mm, without head
The cylinder is made of an aluminium alloy. Due to the material composition, the thermal conductivity of the cylinder could be increased. The piston rings are very stable and have excellent properties. A cylinder for one hundred percent...
Almost gone
€139.90
*
;
€97.93
*
Circlip Fork seal rings, Yamaha YZF- R 125 up to year 13 (RE06)
For securing the fork seals of your Yamaha YZF-R 125. Made of stainless steel (SUS304WPB). Scope of delivery: 2 pcs.
Almost gone
€5.99
*
Cladding kit, Yamaha WR 125 X/R, 7-piece
We offer a complete fairing kit in two different colors for your Yamaha WR 125. The complete kit consists of the rear fender, both side fairings, the tank fairings as well as the front mudguard and the lamp mask. A total of 7 parts. In...
Available
From €383.90
*
Mirror, Brixton BX 125, links, schwarz
This is a cheap replacement part for the original mirror. It is CE homologated - so it is legal. Mounting: M8 right hand
Almost gone
€49.90
*
Sprocket, Brixton BX 125, 45Z, pitch 428
The drive is one of the most stressed parts of a two-wheeler. A worn sprocket also affects the chain, which should be replaced regularly. Technically, however, it makes the most sense to change the entire drive. In addition, the...
Almost gone
€19.90
*
Viewed