




Article out of stock. Expected to be in stock on 31.07.2026
Prices incl. VAT plus shipping costs
Universal bar-end mirror in “Victory design”.
Both the mirror arm and the mirror housing are made of high-quality aluminum and finished with a black anodized coating. The mirror can be used universally on either side of the handlebar.
Installation of the mirrors is quite simple.
First, check whether the ends of your handlebar grips are open. If handlebar weights are installed, this will usually already be the case. Otherwise, you will need to cut open the ends of the grips.
For vehicles with threaded handlebars, simply remove the rubber piece from the mirror’s threaded mount. You can then screw the mirror directly into the existing thread (only suitable for M6 threads).
If the handlebar is hollow, you need to slightly preload the rubber using the nut and screw. If the rubber is too thin, a little black electrical tape can help enlarge it. Then insert the mirror into the handlebar with slight tension and tighten the internal hex screw.
The mirror angle can then be adjusted according to your preference.
Finally, tighten the adjustment screw – done.
Note
The mirror has an E-mark certification, meaning it is legal for road use without additional registration.
To switch the side of the mirror, the screw module in the mirror arm must be repositioned.
Scope of delivery
Gearparts GmbH
Im Langgewann 5-7
65719 Hofheim am Taunus
Kontakt: [email protected]
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Available
Almost gone
Almost gone
Available
Almost gone