No results were found for the filter!
High-quality mounting stand with rubberized bearing surface. Suitable for all motorcycles with free-standing frame. Technical data weight: 8,2kg Up to 135kg load capacity
Available
€69.90
*
;
€53.90
*
Cheap part that will attract a lot of attention. This screw cap is suitable for the rear brake fluid reservoir of the KTM Duke 125, or the front reservoir of the Aprilia RS 125 and can be fitted in less than a minute. Note: The seal of...
Available
€18.95
*
;
From €9.99
*
Here we have an oil filler plug for you, which you can easily exchange for the boring original from KTM. The assembly is of course very simple: old out, new in. You won't even need tools. The screw consists of two individual parts,...
Available
€14.99
*
;
From €10.99
*
Here we offer hand levers in a slightly shortened "Shorty" version. The levers do not affect the comfort while braking and clutch operation. Even the force to be applied during clutch operation does not have to be increased noticeably....
Available
€79.95
*
;
€39.95
*
This replacement oil filter from Motoflow is the ideal filter for the KTM Duke 125. Like the engine oil, the oil filter should also be replaced every year to ensure perfect operation. On this occasion and if necessary, the seals should...
Available
€9.99
*
;
€6.99
*
From Radical Racing we can offer you here a small, cheap sticker set in A5 format. On the sticker set you will find 2 times the Radical logo and 4 times the Radical "R". We have also designed the sticker sheet with three more stickers!
Available
€1.50
*
;
€0.99
*
Here we can offer you simple indicators in Demon Style. The indicators are of course equipped with EG-BE and can therefore be used legally in road traffic. We have the indicators for you in three different colors in the offer: chrome...
Available
€20.95
*
;
€17.99
*
The universal repair set for the throttle cable and/or shift cable consists of two new cables with 2.5m length and various connections for cable attachment.
Available
€12.99
*
;
€8.79
*
Consisting of 46 parts, contains the basic tools, which are necessary for working on the moped.
Available
€39.90
*
;
€29.99
*
To keep the wear of a moped chain low, not only regular maintenance with chain spray is necessary. From time to time the chain should also be cleaned from dirt and old grease. This cleaning brush in combination with brake cleaner leads...
Available
€5.99
*
;
€3.99
*
The circlip pliers are ideally suited for opening the piston pin clips. This version is a universal plier with a replaceable tip. The tips are available in 5 different versions and are therefore ideally suited for almost any application.
Available
€16.95
*
;
€15.49
*
Cooling hoses with internal spiral for reinforcement. In contrast to the conventional black hoses, you can use the transparent cooling hoses to determine exactly whether there is still air in the cooling circuit to exclude possible...
Available
€14.99
*
;
From €9.99
*
Simple tool for cutting chain links. The link to be separated is clamped by the lever and the rivet is pressed out by the spindle.
Available
€15.99
*
;
€12.99
*
Halogen bulbs in Xenon optics, incl. base for BA20D sockets. The blue colouring filters the yellow part of the light to get a clear white light, as it is the case with Xenon. Note: Please check the socket type before ordering. Packaging...
Available
€7.99
*
;
€6.69
*
Vehicle mounting stand 370mm, Universal, red, with turning key
The vehicle mounting stand makes it particularly easy to fit parts. The moped is jacked up on the mounting stand and can then be modified directly. The advantage of an assembly stand that raises both tires is that work can be carried out...
Available
€99.90
*
;
€59.00
*
With the handlebar grips from Progrip you get new and stylish grips for your machine. They significantly facilitate the grip to the handlebar and beautify your moped. Through the different variants you have free styling options and can...
Available
€22.99
*
;
From €12.99
*
Rear wheel cover / mudguard M.A.D, KTM Duke / RC 125, 390, schwarz
The M.A.D mudguards for the KTM Duke/rc 125 and 390 are rear mudguards that are mounted over the wheel and give your motorcycle a sporty look. They also provide protection from the elements and prevent dirt and water from damaging the...
Available
€84.90
*
;
€50.00
*
10-piece set of metric hexagon sockets with 1/2-inch drive. The sockets - here in the short version - have hexagonal toothing for easy positioning on the bolt or nut head. Made of precision cold-forged, tempered chrome vanadium steel,...
Almost gone
€22.95
*
;
€17.99
*
New at Radical Racing MIVV exhausts! The beginning is the Suono. Its unique shape makes it a very popular model in the MIVV product range. The exhaust is provided with an E-number and comes with EG-BE. Technical data: completely made of...
Almost gone
€519.90
*
;
€405.90
*
This is the front manifold or decat pipe made of stainless steel (aisi 304). It is a pure RACING part to remove the original catalytic converter and improve performance. This item is a universal product that can be used with all GPR RC...
Almost gone
€179.90
*
;
€124.90
*
Two-tone "Double Density" handles from Progrip. The basic colour of the handles in this case is white with corresponding neon-coloured accents.
Available
€17.99
*
;
From €12.99
*
The HURRIC TEC One embodies the current GP style: Extra short round shape, technical titanium look and aggressive stainless steel end caps with grilled outlet in GP look. The replacement muffler has a massive sound and is attached with a...
Almost gone
€359.95
*
;
€259.90
*
0240 / NEUWERTG / Auspuffanlage Giannelli X-Pro Black Line NICHT BENUTZT / NEUWERTIG / KRÜMMER FEHLT / LEICHTE NICHT SICHTBARE KRATZER Weitere Details: siehe Bilder Artikel wie Abgebildet
Almost gone
€295.00
*
;
€140.00
*
Tank pads from Progrip are very flexible and self-adhesive. Due to the thick and roughest material not only the tank is optically enhanced but also the paint is protected !
Available
€24.95
*
;
From €19.99
*
Viewed