No results were found for the filter!
Ignition cover seal, Honda 125 4T AC
Replacement seal made of paper. Protects the alternator and ignition of air-cooled Honda 125cc engines from dirt and water.
Almost gone
€8.99
*
Clutch cover seal, Honda 125 4T AC
Clutch cover gasket for Honda 125cc AC (Air-Cooled) engines. Fits for example Honda CBF. thickness: 0,5mm Material: Paper
Available
€10.99
*
Rocker arm set, Yamaha / Minarelli YI 4-Takt Motoren
The rocker arms operate the valves in the 4-stroke cylinder head. Since the part actuated by the camshaft is mounted is mounted on ball bearings it is mechanical exposed to mechanical wear. These rocker arms are the perfect & cheap...
Available
€39.90
*
Reinforced clutch springs increase the contact pressure on the clutch linings and thus prevent the clutch from slipping. Especially after tuning work. Reinforced clutch springs can be used as a spare part for lighter tuning stages but...
Out of Stock
€14.99
*
Replacement fuel injector from Piaggio. Suitable for 125cc 4-T Aprilia engines. OEM part number for comparison 890225
Almost gone
€139.90
*
Oil contamination on the underbody or on the engine is due to a defective seal. In many cases the valve cover gasket is the cause. When servicing the valve train, it is often not replaced. In general, seals should always be replaced to...
Available
€59.90
*
Controller / rectifier, Aprilia RS 125
Controller/rectifier spare part in original quality. Precisely fitting, high quality and in form and function corresponding to the original part.
Almost gone
€97.95
*
TRW-Lucas clutch springs 10% harder than the original springs. Delivery as complete set.
Available
€19.99
*
Controller / rectifier, Honda CBR 125 (JC34A, JC39A, JC40A, JC50A, JC50B) BY. 04-10
OEM specifications are met and/or exceeded All products are subjected to strict validation before they are released Fits the following Honda models: JC34A, JC39A/B, JC50A/B
Almost gone
€74.95
*
ignition coil Original spare part OEM part number for comparison purposes: 30500-KPP-862; 30500KPP861; 30500KPP860;
Almost gone
€69.95
*
Valve cover gasket for Honda KPP1E engines. Original spare part OEM part number for comparison purposes 12391KGH901
Available
€12.99
*
Fuel tap Original spare part OEM part number for comparison purposes 18G245000200
Almost gone
€99.95
*
Standard Honda thermostat for KPP1E engines. Original spare part OEM part number for comparison purposes 19300GEE003
Available
€49.95
*
Fuel filter with hose. Original spare part OEM part number for comparison purposes: 06160-KYJ-900 06160-KPP-T00
Almost gone
€21.35
*
Radiator cap Original spare part OEM part number for comparison purposes 19045KPC871
Almost gone
€46.95
*
This sighting kit from Athena contains all necessary gasket parts around the cylinder & cylinder head.
Out of Stock
€54.99
*
Reinforced clutch springs from EBC, 10% harder than the original springs. Provides relief for slipping clutches by increasing performance.
Almost gone
€15.50
*
Naraku 200cc Big-Bore ceramic cylinder kit with 66mm bore and hard chrome plating, suitable for Yamaha WR, YZF-R, MT and many other 125cc with Yamaha YI engine. Supplied as shown with all seals and small parts necessary for assembly. The...
Available
€229.90
*
Aluminium replacement cooler for Honda CBR 125 models of the JC50 series. Due to the design of motorcycles, it is necessary to change the radiator more often, as they are hit by stones much more often than, for example, the radiator of a...
Almost gone
€129.90
*
Athena, an international company founded in 1973, designs and manufactures gaskets, technical spare parts and metal components for the industrial and motorcycle sector according to the highest quality standards UNI EN ISO 9001, 9002,...
Available
€109.95
*
Fuel tap Original spare part OEM part number for comparison purposes AP8102819
Available
€29.99
*
Air filter Yamaha OEM, Yamaha YZF-R 125 from year 19 (RE39)
Standard air filter from Yamaha. The air filter should be checked regularly and replaced if heavily soiled. In addition, Yamaha indicates in the operating instructions a certain maintenance interval at which the filter should be replaced...
Available
€7.99
*
Paper gasket from Athena. Suitable for all Honda KPP engines, e.g. Honda CBR 125 (JC34A, JC39A/B, JC50A/B) & Honda CB 125 R. Athena, an international company founded in 1973. Mainly Athena designs and manufactures gaskets, technical...
Almost gone
€8.99
*
Nockenwelle Original Replica, Yamaha YI-3/4 Motor
Poorly maintained Yamaha YI engines often have problems with a run-in camshaft. This is especially noticeable in the loss of power that occurs. Also the readjustment of the valves brings then nothing more, because the chrome layer of the...
Available
€49.90
*
Du bist der stolze Besitzer eines 125er Motorrads und möchtest dein Bike auf Vordermann bringen? Dann bist du bei uns genau richtig! Als Experten für Motor-Ersatz- und Tuningteile bieten wir alles, was du für eine Optimierung deines Bikes brauchst.
Von neuen Zylinderkits und Kurbelwellen über hochwertige Auspuffanlagen, diverse Filter und Dichtungen bis hin zu Abdeckungen und Schrauben – bei uns findest du alles, was dein 125er Motorrad zu einem echten Unikat macht. Und das Beste daran: Unsere Produkte sind nicht nur von bester Qualität, sondern auch noch zu erschwinglichen Preisen zu bekommen.
Egal, ob du ein erfahrener Tuner bist oder gerade erst damit beginnst, dein Bike aufzumotzen: Mit unserem breiten Angebot an Motor-Ersatz- und Tuningteilen bist du für jede Situation gerüstet. Also worauf wartest du noch? Schau jetzt bei uns vorbei und mache dein 125er Motorrad zu deinem ganz persönlichen Traumbike!
Viewed