No results were found for the filter!
JMP water cooler - better cooling performance due to special fin technology - ideal for engines with high thermal load - hand welded, polished and pressure tested - can be directly exchanged against the OEM cooler When the engine is...
Available
€154.90
*
Radiator, Yamaha YZF-R 125 bis Bj. 12 (RE06)
Need a new water cooler? You won't find a better alternative to the original radiator for the YZF-R125. Our cooler has a special fin technology with better cooling performance than most original coolers and is therefore ideal for...
Available
€149.90
*
The regulation of a suitable engine operating temperature is controlled by the coolant thermostat. If the engine is too warm, the thermostat directs cooling water to the radiator. If the temperature is too low, it closes the water...
Almost gone
€47.03
*
If your engine does not warm up properly in winter, it is usually due to a defective coolant thermostat. This small part is unfortunately often forgotten and poorly maintained on motorcycles, as it cannot influence the heating as it does...
Available
€24.99
*
Experience has shown that the water pump sealing rings are a weak point in motorcycle engines. As soon as the oil in the gearbox takes on a milky, dull colour, you should check whether the Simmerrings of the water pump are still properly...
Almost gone
€25.95
*
This item is an original spare part (OEM) of the Honda brand. OEM part number for comparison purposes 19110KPP930 Scope of delivery: 1 pc.
Almost gone
€20.95
*
;
€16.95
*
The coolant thermostat is an important part of the cooling system. If it no longer opens or closes correctly, the engine can overheat or undercool while driving. In the worst case, this can lead to engine damage. Therefore, you should...
Available
€31.95
*
This item is an original spare part (OEM) of the brand Kawasaki. OEM part number for comparison purposes 110610927 Scope of delivery: 1 pc.
Almost gone
€6.65
*
This item is an original spare part (OEM) of the brand Piaggio (Aprilia). OEM part number for comparison purposes Piaggio: 2B004307 Scope of delivery: 1 pc.
Almost gone
€51.95
*
This item is an original spare part (OEM) of the brand Piaggio (Aprilia). OEM part number for comparison purposes Piaggio: 871418 Scope of delivery: 1 pc.
Available
€4.99
*
Standard Honda thermostat for KPP1E engines. Original spare part OEM part number for comparison purposes 19300GEE003
Available
€49.95
*
Radiator cap Original spare part OEM part number for comparison purposes 19045KPC871
Almost gone
€46.95
*
Aluminium replacement cooler for Honda CBR 125 models of the JC50 series. Due to the design of motorcycles, it is necessary to change the radiator more often, as they are hit by stones much more often than, for example, the radiator of a...
Almost gone
€129.90
*
Spare sealing ring from Athena.
Almost gone
€1.99
*
Handmade radiator with 20% more cooling capacity suitable for KTM 125 Duke & 390. With this cooler, different material thicknesses are used. In places subject to particularly high stress, such as brackets, the material is stronger and...
Almost gone
€189.90
*
Cooler, KTM Duke 125 to year of construction 16
Replacement radiator for KTM Duke 125 up to model year 2016.
Almost gone
€271.90
*
;
€129.90
*
The cover of the cooling water tank of the MT is located deep down in the front spoiler. Unfortunately it gets lost very quickly even if it is not fixed properly. OEM part number for comparison purposes 5VK218750000
Almost gone
€15.90
*
The cover of the cooling water tank of the YZF lies deep down in the shoring. Unfortunately it gets lost very quickly even if it is not fixed properly. OEM part number for comparison purposes 5DSF17710000
Available
€4.49
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.
Available
€1.29
*
Cooling hoses with internal spiral for reinforcement. In contrast to the conventional black hoses, you can use the transparent cooling hoses to determine exactly whether there is still air in the cooling circuit to exclude possible...
Available
€14.99
*
;
€12.99
*
Cooling water hose, 1m x 9mm, transparent
These cooling hoses have an internal spiral for reinforcement. In contrast to the conventional black hoses, the transparent cooling hoses allow you to determine exactly whether there is still air in the cooling circuit, in order to...
Available
€9.99
*
Available
€10.99
*
Cooling water hose, with steel spiral,15mm, 1 meter, transparent
Transparent coolant hose with an inner diameter of 15mm. The length is 1m. Coolant hoses with an inner diameter of 15mm are usually used on mopeds with Minarelli engines. Practical side effect, you can see whether the cooling water is...
Available
€14.99
*
The cooling system of your motorcycle has an important task. It ensures that your bike does not overheat even under stronger load does not overheat. For this to work, the cooling system must function correctly. In the case of strong vibrations, cracks and leakage can occur in the filigree cooling fins of the radiator. Then you can find a replacement radiator for your motorcycle.
Even more common, however, is that it comes with older bikes to cracks in the coolant hose, or that the Thermostat no longer works correctly. If it runs quite stupidly, you leave your coolant cap somewhere lie. For all these problems on the cooling system of your machine, we have the right spare parts.
Viewed