Tip Use our  Bike-Filter to get only suitable articles displayed.
Tip Nutze dein zuletzt gewähltes Bike, um nur passende Artikel angezeigt zu bekommen.
0 Article
 

Gaskets, Seals & Bearings

Close filters
11 From 13
No results were found for the filter!
cylinder base gasket Piaggio OEM, Rotax 122/123, 0,3mm
cylinder base gasket Piaggio OEM, Rotax 122/123, 0,3mm, Rotax 122/123, 0,3mm
- Leider nicht mehr Lieferbar - OEM Artikelnummern zu Vergleichszwecken Piaggio AP0650095-8125

Out of Stock

€11.99 * ; €8.49 *
Gasket timing chain tensioner KTM OEM
Gasket timing chain tensioner KTM OEM, KTM Duke / RC 125/390 alle Bj (KTM 4T Motor)
This item is an original spare part (OEM) of the brand KTM. OEM part numbers for comparison purposes - KTM 90136003003 Scope of delivery: 1 pc.

Available

€2.99 *
Gasket oil filter chamber Kawasaki
Gasket oil filter chamber Kawasaki, Kawasaki Z 125 ab Bj. 18, Ninja 125 ab Bj. 19
This article is an original spare part (OEM) of the manufacturer of the brand Kawasaki.

Available

€2.98 *
Gasket oil filter chamber KTM
Gasket oil filter chamber KTM, KTM Duke Bj. 11-17, RC 14-17
This article is an original spare part (OEM) of the manufacturer of the brand KTM.

Available

€2.19 *
Ignition cover seal Ignition cover seal, Honda 125 4T AC
Replacement seal made of paper. Protects the alternator and ignition of air-cooled Honda 125cc engines from dirt and water.

Out of Stock

€8.99 * ; €6.29 *
Clutch cover seal Clutch cover seal, Honda 125 4T AC
Clutch cover gasket for Honda 125cc AC (Air-Cooled) engines. Fits for example Honda CBF. thickness: 0,5mm Material: Paper

Available

€10.99 *
Valve cover gasket Piaggio OEM
Valve cover gasket Piaggio OEM, Aprilia RS / RS4 / SX 125 (Type: TW, KC, KXB), Derbi Senda 125 (4-stroke)
Oil contamination on the underbody or on the engine is due to a defective seal. In many cases the valve cover gasket is the cause. When servicing the valve train, it is often not replaced. In general, seals should always be replaced to...

Available

€53.95 *
Valve cover gasket Honda OEM
Valve cover gasket Honda OEM, Honda CBR 125 (JC34 A/B , JC39 A/B, JC50 A/B), original spare part
Valve cover gasket for Honda KPP1E engines. Original spare part OEM part number for comparison purposes 12391KGH901

Available

€9.99 *
Alternator cover gasket Athena
Alternator cover gasket Athena, Honda KPP E-1 4-T Motor, (CBR 125 ab Bj. 04, JC34/39/50, Honda CB 125 R ab Bj. 18 JC79)
Paper gasket from Athena. Suitable for all Honda KPP engines, e.g. Honda CBR 125 (JC34A, JC39A/B, JC50A/B) & Honda CB 125 R. Athena, an international company founded in 1973. Mainly Athena designs and manufactures gaskets, technical...

Almost gone

€8.99 *
Valve cover gasket Athena
Valve cover gasket Athena, KTM Duke / RC 125
Replacement seal from Athena. In case of oil leaks or adjustment work on the open cylinder head, gaskets should be replaced as a precaution.

Almost gone

€22.95 *
Gasket rubber valve cover Athena
Gasket rubber valve cover Athena, KTM Duke / RC 125
Replacement rubber from Athena. In case of oil leaks, or adjustment work on the open cylinder head gaskets should be replaced as a precaution. This rubber seals screw holes. Delivery 1 piece.

Almost gone

€3.99 *
Starter cover gasket Athena
Starter cover gasket Athena, Honda CBF 125 from year 15-19 (JC64A, JC74A), 3 x 24mm
O-ring seal for the starter cover of the Honda CB 125 F. Dimensions: 3x24mm About Athena products Athena, an international company founded in 1973, designs and manufactures gaskets, technical spare parts and metal components for the...

Available

€1.99 * ; €1.39 *
Ignition cover / alternator cover gasket Athena
Ignition cover / alternator cover gasket Athena, KTM Duke / RC 125
Maintenance work on the engine is always a good opportunity to replace the seals at the same time. If maintenance work is necessary on the alternator side of the engine, we recommend to install a new gasket, if the cover is already removed.

Available

€8.99 *
Gasket rubber valve cover Athena
Gasket rubber valve cover Athena, Honda universal, various models
Replacement rubber from Athena. In case of oil leaks, or adjustment work on the open cylinder head, gaskets should be replaced as a precaution. This rubber seals screw holes. Delivery 1st piece.

Almost gone

€2.99 *
Valve stem seal set Athena
Valve stem seal set Athena, Honda KPP E-1 4-T engine (CBR 125, CB 125 R)
Small component with great effect. The valve stem seals influence for example the oil consumption. Hard "stems" let oil run down the valve, which is then burned. For any work on the dismantled cylinder head, it is anyway recommended to...

Almost gone

€7.49 * ; €5.99 *
Clutch cover gasket Athena
Clutch cover gasket Athena, KTM Duke / RC 125
If the coupling is replaced or other maintenance work is pending under the coupling cover, it is always advisable to invest in a new seal at the same time. Subsequent oil leaks are always annoying and can thus be avoided.

Available

€7.99 *
Clutch cover gasket Athena
Clutch cover gasket Athena, Honda KPP 1-E engine (CBR 125 JC34A, JC39 A/B, JC50 A/B, JC79, etc...)
Athena, an international company founded in 1973, designs and manufactures gaskets, technical spare parts and metal components for the industrial and motorcycle sector to the highest quality standards. Athena gaskets are therefore the...

Out of Stock

€10.99 *
Engine gasket set Athena
Engine gasket set Athena, KTM Duke / RC 125
Complete engine gasket set from Athena, suitable for KTM 125cc 200cc and 390cc 4-T engines. The gasket set includes cylinder base, head & valve cover gaskets as well as the gaskets for clutch & alternator covers and many other small...

Available

€76.95 *
Valve stem seal Athena
Valve stem seal Athena, Kawasaki Ninja / Z 125
Valve stem seals are installed to prevent oil from the cylinder head from entering the combustion chamber via the valve guides. A blue smoking exhaust can be an indication for defective valve stem seals besides other damages. Suitable as...

Available

€5.95 * ; €2.94 *
Seal timing chain tensioner Aprilia OEM
Seal timing chain tensioner Aprilia OEM, Aprilia 125cc 4T
Paper seal to seal the timing chain housing. Should be replaced during all maintenance work on the timing chain tensioner. OEM part number for comparison purposes 430350; 834254; 862777; AP8550429; AP8575011; 847928

Available

€3.19 *
Timing chain tensioner seal Yamaha OEM
Timing chain tensioner seal Yamaha OEM, Yamaha YI-3 engine from year 14 up (YZF-R/ MT 125, RE11/29, Beta RR)
If the timing chain tensioner is replaced, it may be necessary to renew its seal as well. Here we offer this spare part original from Yamaha. OEM part number for comparison purposes 1DYE22130000

Available

€4.24 *
11 From 13

When it comes to keeping your 125 in top shape, seals and gaskets are an important element you mustn't neglect. These small but vital parts stop oil and other fluids leaking from the engine and make sure all components stay properly lubricated. If seals are damaged or need replacing, it's important to use quality replacement parts.

One thing a lot of people overlook when buying seals for their bike is that they should come from a trusted supplier. Cheap replacement parts can fail quickly and lead to expensive repairs.

Another important point when choosing seals is whether they're compatible with your bike. If they're not, they won't work properly and could even damage your engine.

If you decide to change your seals yourself, make sure you've got all the tools you need beforehand so the job goes smoothly. With the right preparation and the right tools, you can change your seals quickly and easily and keep your 125 in top shape.

Viewed