No results were found for the filter!
Screw / Dummy plug, M12x1.25
Screw with thread size M12x1.25. Can be used to close water connections in the cylinder head, for example. But it is also possible to use it as a drain plug and plug in many other applications. Delivery incl. copper gasket.
Available
€10.99
*
These bolts are usually used as brake disk or sprocket bolts. Although this is a Rieju original spare part, this bolt can of course also be used on all other vehicles and for every conceivable purpose. Technical data Thread: M6 Head:...
Available
€3.29
*
Standard Rieju replacement fairing screw, but we have marked this as a universal screw in the shop, because it can of course be used on any other vehicle as well. OEM part number for comparison purposes 0/000.460.3031
Available
€1.49
*
Fairing / cockpit screw set, screws + washer + rubber nut M6 (10 pieces each)
6mm fairing screws, or cockpit washer screw set. The set contains 10 screws, the matching washers and 10 rubber nuts.
Almost gone
€15.99
*
Technical data total length: 235mm diameter wheel bearing: 15mm diameter shaft: 20mm Shaft length: 59mm Thread: M14 Thread length: 21mm width spacer: 21mm Outer diameter spacer: 25mm Scope of delivery Thru axle Self-locking nut Spacer
Out of Stock
€53.95
*
Screw side stand, Rieju Marathon (MRT) 125
Screw for side stand mounting. measurements: Thread: M10x1,25 Length: 52mm
Available
€7.79
*
Cladding screw, M6x14, Torx T-30
Spare fairing screw. It can of course be used on any other vehicle. Please note dimensions!
Available
€1.49
*
Spare fairing screw. It can of course be used on any other vehicle. Note dimensions! Scope of delivery 5 pcs.
Available
€6.99
*
Cladding screw, M6x10, Torx T-30, universal
Simple, very short fairing screw with flat head and Torx hexagon socket. Technical data length: 10mm Thread: M6 Width across flats: T-30
Available
€1.49
*
Screw / Sprocket bolt, M6x20 (DIN933), universal, 6 stck.
In the end it is a normal M6 8.8 DIN screw. Therefore it can be used almost universally. Here we offer a set of 6 screws. Scope of delivery: 6 pcs.
Available
€10.99
*
Screw, M5x16, Inbus DIN912, universal, 5 stck.
5mm DIN socket head screw. Can be used for every imaginable purpose. Scope of delivery: 5 pcs. Technical data Head: Cylindrical drive: Hexagon socket (Allen) length: 16mm Thread: M5 Standard: DIN912
Almost gone
€5.99
*
Screw, M5x16, Inbus DIN912, universal
5mm DIN socket head screw. Can be used for every imaginable purpose. Scope of delivery: 1 pc. Technical data Head: Cylindrical Propulsion: Hexagon socket (Inbus) Length: 16mm Thread: M5 Standard: DIN912
Available
€1.29
*
Screw / Sprocket bolt, M6x20 (DIN933), universal
In the end it is a normal M6 8.8 DIN screw. Therefore it can be used almost universally. Scope of supply: 1 pc.
Available
€1.99
*
Cladding screw, M6x10, Torx T-30, universal, 5 stck.
Simple, very short fairing screw with flat head and Torx hexagon socket. Can of course be used on all vehicles. Scope of delivery: 5 pcs. Technical data length: 10mm Thread: M6 Width across flats: T-30
Available
€6.99
*
Cladding screw, Universal, M5
Screw with collar and hexagon socket, for fairing parts, suitable for various vehicles. Thread: M5 length: 9 mm
Available
€2.39
*
Pack of 5 screws, M6 x 20 mm, flat head / inside corner (Torx), stepped
Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm
Available
€9.99
*
Screw, M6, with collar, pack of 4
Collar screw with M6 thread and 16mm length is idr. used as brake disk screw. But it can also be used for everything else. Thread: M6 Head: 6 Kant length: 16 mm
Available
€5.49
*
Fairing / cockpit screw set, M5, screws, washers & rubber nut, (10 pieces each)
5mm fairing screws, or cockpit windscreen screw set. The set contains 10 screws, the matching washers and 10 rubber nuts. suitable for hole diameters 10mm to 11mm
Available
€15.99
*
Screw, sprocket / brake disk, M8 x 18 mm, flat head / hexagon socket (TX), stepped
These bolts are usually used as brake disk or sprocket bolts. Incl. dry threadlocker (blue - medium strength). Thread: M8 Head: Flat / TX Length: 18 mm
Available
€2.49
*
10 pack fairing screws, Universal, M5
Pack of 10 hexagon socket head fairing screws, suitable for the fairings of various vehicles. Thread: M5 length: 9 mm
Available
€20.95
*
Clutch cable adjusting screw Domino, M7, Universal
Almost universally applicable adjusting screw for clutch cables. Thread: M7 Inner diameter: 8,5 mm
Available
€5.49
*
Chain wheel bolt, universal, M8x1,25x40mm
Stud bolt for universal use. Used on some vehicles, e.g. for fastening the chain wheel. (Yamaha MT 125 & YZF-R 125)
Available
€3.99
*
Drain plug Oil/ dummy plug Coolant temperature, M14x1.5
M14 screw with 1.5 thread pitch. Can be used e.g. as drain plug for engine oil.
Available
€2.79
*
Available
€1.59
*
If you're looking for quality screws and bolts for your 125, you've come to the right place. Our range offers a wide choice of sizes and materials, so you'll find exactly what you need.
But why buy your screws and bolts from us? Simple: quality and customer satisfaction come first. We only sell products from well-known manufacturers made to the highest standards, so you can be sure you're getting durable, reliable parts.
We're also always happy to answer your questions. Our customer service team is on hand to advise you and help you track your order.
So don't hesitate – have a look around our shop now! We're sure you'll find exactly what you need.
Viewed