2. Filter by category
No results were found for the filter!
Here we offer a simple choke, with an actuator, which can be installed in the fairing of the vehicle as desired. The lever is delivered with a cable pull, can only be used in vehicles with carburetor.
Available
€12.99
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
As some cylinders are only supplied with one gasket, the adjustment of timing and pinch point is often not easy to achieve. In such a case the real moped tuner always has a sheet of gasket material at hand, from which he can cut an...
Out of Stock
€2.49
*
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.
Available
€1.29
*
Cooling hoses with internal spiral for reinforcement. In contrast to the conventional black hoses, you can use the transparent cooling hoses to determine exactly whether there is still air in the cooling circuit to exclude possible...
Available
€14.99
*
;
From €9.99
*
Fuel hose with one meter length and 5mm inner diameter. In many different colours. In addition to its actual use as a petrol hose, it can also be used as a hose for many other purposes. Available in many different colours. The hose can...
Available
€2.00
*
NEW
Der VOCA Racing Silikon-Kraftstoffschlauch überzeugt durch seine hochwertige Verarbeitung und hohe Beständigkeit im täglichen Einsatz. Durch den hohen Silikonanteil bleibt der Schlauch dauerhaft flexibel und neigt deutlich weniger zum...
Available
€4.99
*
Available
€2.99
*
Ersatzkolbenbolzenlager aus dem Hause Bidalot. Passend bei allen 94cc Langhubkurbelwellen von Bidalot.
Almost gone
€19.99
*
Adjustment screw for clutch cable, Various colors, 30 mm, M10, CNC aluminum
The CNC-milled aluminum clutch adjustment screw allows you to adjust your clutch cable quickly and precisely. The large adjustment wheel allows you to adjust the clutch play cleanly and in a controlled manner – even on the road without...
Available
€7.99
*
Retaining rubber radiator, Outer diameter 23.5 mm x inner diameter 11 mm x height 10 mm
This rubber bushing for the radiator bracket is used for secure and low-vibration mounting of the radiator. It effectively absorbs vibrations and thus protects the radiator from damage. Thanks to the elastic material, it fits perfectly...
Available
€3.99
*
Locking bolt, Screw and seal, various Sizes
The oil drain plug is a small but important spare part - it ensures that your engine oil remains safely in the engine housing and can be drained cleanly when changing the oil. If the thread is damaged or the old screw is twisted, this...
Available
€4.99
*
Manual choke cable Motoforce, PWK / CP / Flat Slide carburetor, red
The manual choke for PWK and Polini CP carburetors gives you full control over the cold start of your scooter or moped. Instead of relying on an automatic choke, you can now adjust the fuel/air mixture manually. This ensures reliable...
Available
€6.90
*
Retaining rubber radiator, 19x9,7x3x8, various colors Colors
Whether your radiator rattles or simply no longer sits properly - you can quickly remedy the situation with the right retaining rubber. This fastening element made of high-quality silicone is specially designed and ensures a secure,...
Available
€3.99
*
Retaining rubber radiator, 24,5x12,5x14x3mm, various colors Colors
If the radiator wobbles, rattles or is no longer secure, it's time for a fresh hold. This retaining rubber is exactly the right spare part for many models - and ensures that your radiator is securely mounted again without vibration. The...
Available
€4.99
*
Fuel hose / petrol hose, 1m, neoprene, rubber compound, various diameters
Fuel hose / Petrol hose In the following variants: 6mm 7mm 8mm Length : 1m
Available
From €14.99
*
Adapter für Temperatursensor Stage6 Adapter mit 22mm/18mm/16mm Außendurchmesser, zur einfachen Installation eines Temperaturgebers, z.B. von Stage6 oder Koso, in den Kühlkreislauf. Praktische Lösung, wenn das vorhandene Thermometer...
Available
€22.00
*
The VOCA Bestia CNC Flow Cooler is a high-quality flow cooler that has been specially developed for powerful 2-stroke engines. It optimizes cooling performance and ensures effective temperature control, especially for tuned or heavily...
Available
€25.95
*
The "T-Link" cooling pipe adapter is available for 16, 18 or 22 mm cooling pipes. The thermostat cooling tube adapter is the ideal connector for reading the cooling water temperature with VOCA or KOSO temperature gauges. The adapter can...
Almost gone
€24.95
*
This article is an original spare part (OEM) from Beta OEM part number for comparison purposes : 3500397 Scope of delivery: 1
Available
€9.99
*
Copper sealing ring, Copper, 14x18x1.5, f. Thermoswitch / Universal
Universally applicable copper sealing ring with the dimensions 14x18x1.5, usually used on Piaggio/Derbi/Aprilia engines as a seal for the thermal switch. However, it can be used for any other application.
Available
€2.79
*
This TNT replacement radiator is an inexpensive alternative to the original radiator that delivers good quality at a fair price. OEM part number for comparison purposes: 093600N
Available
€109.90
*
This item is an original Honda brand gasket. Cylinder gaskets often need to be replaced to ensure optimum engine function and are therefore an unavoidable part of your motorcycle maintenance. OEM part number for comparison purposes...
Out of Stock
€24.95
*
Mounting bracket Schmitt, universell
Universal with rubber buffer, e.g. for radiators, tanks, custom panels etc...
Available
€9.99
*
Viewed