No results were found for the filter!
Practical drip tray for draining operating fluids such as oil, fuel or coolant. The liquid container / canister has a capacity of 8 litres.
Available
€26.95
*
Work gloves/mechanic gloves, One size fits all
Seamless nylon work or mechanic gloves with completely PU coated palm to above the fingertips. These work gloves meet the requirements as protective gloves against mechanical risks EN 388 4130.
Available
€4.99
*
Blocking and holding tool, universal
Universal holding and blocking tool to work on all kinds of moving parts.
Out of Stock
€21.95
*
Available
€12.99
*
Ideal for on the road. This repair kit contains special (slightly thicker) patches for scooter or moped hoses. Patched or repaired tubes are always an emergency solution and not a permanent temporary solution. A patched hose should be...
Available
€6.99
*
Funnel, Silicone, foldable
By using silicone, this funnel is flexible and foldable. So it can be folded to a small pack size to stow it under the seat for example. This finally puts an end to the mess when filling oil! Technical data Outside diameter 80mm height...
Available
€7.49
*
Soft-face hammer
Absoult essential tool in every good screwdriver workshop! Gentle hammers are especially useful when power is needed but the workpiece must not be damaged.
Almost gone
€9.99
*
Funnel set, 3-part (d=90/110/140mm), universal
3-piece hopper set for all mixing and filling operations. Hopper diameter: 90 / 110 / 140mm
Available
€4.99
*
Internal multi-tooth key, with hole, Torx-Special (T30), for Pin-Torx (I-Torx)
Special wrench for easy removal of Torx screws with pin (I-Torx), as used e.g. to protect intake manifolds from opening.
Almost gone
€6.99
*
Cable ties 100 pieces, passed away. Sizes
With the cable ties, we offer further helpful workshop accessories that have been developed to fix various cables and entire cable harnesses together or to fix other objects. These cable ties are available in different lengths in black...
Available
€6.99
*
Available
€29.95
*
Heat-shrink tubing set, 60 parts (d=2mm/3,5mm/5mm)
The shrink tubing set is suitable for all electrical work and is supplied in a practical storage box.
Almost gone
€11.95
*
You will need polewheel pullers to remove the flywheel of the alternator. Unfortunately, Buzzetti does not give any exact information about which moped needs which puller, our assignment is based on experience, best you measure the...
Available
€9.99
*
Hose Clip-off pliers
Simple tool for effectively disconnecting hoses without damaging them too much. The hose clamp pliers are made of robust plastic, but should only be used for smaller hoses such as petrol and oil hoses. Scope of delivery: Pliers Locking...
Almost gone
€11.99
*
Who hasn't? You are happy because the new cylinder has finally arrived and already during the installation the dilemma happens: the piston ring cracks when trying to bring it over the piston. With this tool this is over now. In addition,...
Out of Stock
€9.99
*
Hexagon socket key set
Practical tool for on the road. Equipped with 2 to 8 hexagon sockets for the most common sizes on the motorcycle. Key size: 2; 2,5; 3; 4; 5; 6; 8
Available
€7.99
*
Small parts box, transparent, with 9 compartments, 137x137x30mm
Practical small, transparent small parts box for small items that tend to disappear like main nozzles, clutch springs etc... For better division there are six partitions which can be placed anywhere. Dimensions: 137 X 137 x 30mm.
Available
€3.99
*
The biker is himself. There is always something to do on your motorcycle. That's no reason to have to go to the expensive workshop every time. You just need some will and the right tools. Then, with a little googling and trial and error, you can repair many things on your bike yourself.
You can find the right tools to equip your small workshop at home here. From jack stands for jacking up, to socket sets and oil pans, you'll find everything you need to screw on your bike here.
Viewed