1. Choose model
MX 125 (2004 bis 2007, TZ0)
2. Filter by category
No results were found for the filter!
Copper sealing ring, Copper, 14x18x1.5, f. Thermoswitch / Universal
Universally applicable copper sealing ring with the dimensions 14x18x1.5, usually used on Piaggio/Derbi/Aprilia engines as a seal for the thermal switch. However, it can be used for any other application.
Available
€2.79
*
The seals should be replaced for every engine or clutch opening. With old gaskets, there is a risk that they will no longer seal properly after they have been closed a second time. The clutch housing gasket from Athena offers exactly...
Available
€7.99
*
This article is an original spare part from Aprilia OEM number for comparison purposes : AP0250975
Almost gone
€9.99
*
This article is an original product of the Piaggio brand OEM number for comparison purposes : 876418
Out of Stock
€3.99
*
Replacement intake manifold for Rotax 122 engines. OEM part number for comparison purposes Aprilia: AP0267918
Almost gone
€149.90
*
Mounting bracket Schmitt, universell
Universal with rubber buffer, e.g. for radiators, tanks, custom panels etc...
Available
€9.99
*
Improve your motorcycle experience with the Uma Racing quick shift lever. This innovative accessory allows you to shift gears without the need for the clutch, while protecting your motorcycle transmission. Installation is as easy as can...
Almost gone
€259.90
*
Aprilia original spare part. This sealing ring is used as a seal between the water circuit and the spark plug hole/cylinder head cover. OEM part number for comparison purposes Aprilia, Piaggio: AP0430782
Almost gone
€6.99
*
Float chamber drain plug, PWK Carburetor, Orange
Simple styling part for flat slide and type PWK carburetor. The screw is made of anodized aluminum. Delivery Incl. gasket
Almost gone
€6.00
*
This pack contains 2 reinforced competition Viton spy joints for the crankshaft, specially designed for anti-friction and high speed. They are smaller and lighter than the original joints for the ROTAX 125cc engine, resulting in improved...
Available
€12.99
*
Needle roller bearing / Gearbox bearing / Shift drum bearing / Shaft bearing, universal, 10x10x14
This article is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and connections. It can be used in different places of different bikes. OEM part number for comparison...
Available
€2.99
*
Gearbox bearing / Needle roller bearing / Shift shaft bearing, universell, 12x16x10
This item is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and connections. It can be used in different places of different bikes. OEM part number for comparison...
Available
€2.99
*
ProTaper clutch fitting made of cold forged aluminum. The clutch fitting comes with quick adjustment as well as a bearing forged aluminum lever. The nylon ring on the clamping surface can prevent the armature from breaking in the event...
Available
€56.95
*
Cooling water hose, 1m x 9mm, transparent
These cooling hoses have an internal spiral for reinforcement. In contrast to the conventional black hoses, the transparent cooling hoses allow you to determine exactly whether there is still air in the cooling circuit, in order to...
Available
€9.99
*
This item is an original spare part (OEM) of the brand Aprilia. OEM part number for comparison purposes AP0259559, AP0259557 Scope of delivery: 1 pc.
Almost gone
€6.99
*
Crankshaft bearing set, Rotax 122/123, Aprilia RS 125, RX/SX 125
Replacement crankshaft bearings for the Rotax 122 & 123 engine. Scope of delivery Incl. both main bearings, a new piston pin bearing and the two crankshaft seal rings. Bearing type: 6206 C3
Available
€41.95
*
Oil hose, 2,2x4mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,2mm Outer diameter: 4mm Length: 5m
Available
€4.99
*
Oil hose, 2,5x5mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,5mm Outer diameter: 5mm Length: 5m
Available
€3.99
*
Available
€8.29
*
Cooling water hose, with steel spiral,15mm, 1 meter, transparent
Transparent coolant hose with an inner diameter of 15mm. The length is 1m. Coolant hoses with an inner diameter of 15mm are usually used on mopeds with Minarelli engines. Practical side effect, you can see whether the cooling water is...
Available
€14.99
*
These plastic gears are an absolute weak point of the Rotax 122 engine, a breakage of these does not zingend lead to engine damage, but it feels not far from it, if the balancer shaft suddenly no longer runs. Anyone who opens the side...
Almost gone
€65.95
*
Arrow replacement seal. Can be used not only with Arrow, but also with all other exhaust systems with 32mm diameter and plug-in flange. Technical data Diameter (inside): 32mm width: 30mm
Available
€10.00
*
Clamps / hose clamps, 50 parts
Practical assortment box with different sizes of hose clamps. Should not be missing in any well-assorted workshop. Delivered are 10 clamps each in 6, 8, 10, 12 and 14mm diameter.
Available
€34.95
*
choke lever, Universal, various colors, for mounting on handlebars
Universal choke lever for custom conversions. Simple mounting with clamp, directly on the handlebars as mentioned, fits virtually any cable choke. Available in black & chrome.
Available
€10.99
*
Viewed