1. Choose model
RS 125 (2021 bis 2024, XA- Euro5)
RS 125 (2017 bis 2020, KC - Euro4)
RS4 125 (2011 bis 2017, TW - Euro3)
RS 125 (2006 bis 2013, RM/RD)
RS 125 (1995 bis 2005, MP/SF)
2. Filter by category
No results were found for the filter!
NEW
Dieser kompakte Durchlaufkühler ist die perfekte Ergänzung für wassergekühlte Motoren, bei denen es auf jedes Grad weniger ankommt. Er wird direkt in den Kühlkreislauf eingebaut und sorgt dort für zusätzliche Wärmeabfuhr – besonders...
Available
€16.95
*
NEW
Dieser kompakte Durchlaufkühler ist die perfekte Ergänzung für wassergekühlte Motoren, bei denen es auf jedes Grad weniger ankommt. Er wird direkt in den Kühlkreislauf eingebaut und sorgt dort für zusätzliche Wärmeabfuhr – besonders...
Available
€16.95
*
NEW
This item is an inexpensive alternative to the original spare part. The seal corresponds to the original in terms of dimensions and function. OEM part number for comparison purposes: 1A007851
Available
€25.95
*
Complete overhaul kit for the Rotax 122 & 123 125cc engine. The set consists of all necessary gearbox and crankshaft bearings, as well as the appropriate sealing rings. If major repairs and splitting of the engine are planned, it is...
Available
€59.95
*
Replacement crankshaft from the house R&D, made in Europe and exact copy of the Rotax 122/123 original - crankshaft. Since the Rotax engine usually already belongs to the older semesters, we generally recommend before installing the...
Available
€219.90
*
Here we offer a vacuum fuel tap for all motorcycle models with carburetor. The fuel tap is simply pushed into the tank instead of the old one and can also be used to convert from manual operation to automatic operation. We recommend to...
Available
€8.99
*
Here we offer a simple choke, with an actuator, which can be installed in the fairing of the vehicle as desired. The lever is delivered with a cable pull, can only be used in vehicles with carburetor.
Available
€12.99
*
Athena, an international company founded in 1973, designs and manufactures gaskets, technical spare parts and metal components for the industrial and motorcycle sector according to the highest quality standards UNI EN ISO 9001, 9002,...
Available
€129.90
*
;
€99.95
*
Complete overhaul kit for the Rotax 122 & 123 125cc engine. The set consists of all necessary gearbox and crankshaft bearings, as well as the appropriate sealing rings. If major repairs and splitting of the engine are planned, it is...
Available
€49.95
*
An oil change also includes changing the filter. To prevent the filter chamber from leaking, the O-ring that seals it should always be replaced.
Available
€3.99
*
Replacement gaskets for the Piaggio 125cc 4-stroke engine, which was used for example in the Aprilia RS4 125.
Available
€89.90
*
;
€69.95
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
As some cylinders are only supplied with one gasket, the adjustment of timing and pinch point is often not easy to achieve. In such a case the real moped tuner always has a sheet of gasket material at hand, from which he can cut an...
Available
€2.49
*
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.
Available
€1.29
*
Cooling hoses with internal spiral for reinforcement. In contrast to the conventional black hoses, you can use the transparent cooling hoses to determine exactly whether there is still air in the cooling circuit to exclude possible...
Available
€14.99
*
;
From €9.99
*
Fuel hose with one meter length and 5mm inner diameter. In many different colours. In addition to its actual use as a petrol hose, it can also be used as a hose for many other purposes. Available in many different colours. The hose can...
Available
€2.00
*
NEW
This item is an original spare part from the Piaggio brand. OEM number for comparison purposes: 1A009397
Out of Stock
€1.49
*
NEW
This item is an original spare part from the Piaggio brand. OEM number for comparison purposes: 8290405
Out of Stock
€17.99
*
NEW
Fuel hose / petrol hose, 1m, neoprene, rubber compound, various diameters
Fuel hose / Petrol hose In the following variants: 6mm 7mm 8mm Length : 1m
Available
From €14.99
*
NEW
Fuel filter, 7mm, various colors
The aluminum elements of this fuel filter are available in different colors. This allows the filter and hoses to be visually matched. The connection width of the filter is 7 mm. The fuel hoses we offer are therefore a perfect fit.
Out of Stock
€9.99
*
NEW
Adapter für Temperatursensor Stage6 Adapter mit 22mm/18mm/16mm Außendurchmesser, zur einfachen Installation eines Temperaturgebers, z.B. von Stage6 oder Koso, in den Kühlkreislauf. Praktische Lösung, wenn das vorhandene Thermometer...
Almost gone
€22.00
*
NEW
The VOCA Bestia CNC Flow Cooler is a high-quality flow cooler that has been specially developed for powerful 2-stroke engines. It optimizes cooling performance and ensures effective temperature control, especially for tuned or heavily...
Almost gone
€25.95
*
Want to get more power out of your Aprilia? Then this upgrade is just the thing! Malossi 166cc cylinder kit - High-quality aluminum cylinder with Nikasil coating for optimum durability and thermal stability. More displacement means more...
Almost gone
€878.90
*
The "T-Link" cooling pipe adapter is available for 16, 18 or 22 mm cooling pipes. The thermostat cooling tube adapter is the ideal connector for reading the cooling water temperature with VOCA or KOSO temperature gauges. The adapter can...
Almost gone
€24.95
*
Viewed