1. Choose model
RS 125 (ab 2025, XTA (Euro5+))
RS 125 (2021 bis 2024, XA- Euro5)
RS 125 (2017 bis 2020, KC - Euro4)
RS4 125 (2011 bis 2017, TW - Euro3)
RS 125 (2006 bis 2013, RM/RD)
RS 125 (1995 bis 2005, MP/SF)
2. Filter by category
No results were found for the filter!
NEW
Kühlwasserthermostat von Motoflow – wichtiges Bauteil zur Regelung der Motortemperatur und für einen effizienten Betrieb deines Motors. Ein defektes Thermostat kann dazu führen, dass der Motor nicht die optimale Betriebstemperatur...
Available
€16.99
*
This compact flow-through cooler is the perfect addition for water-cooled engines where every degree counts. It is installed directly in the cooling circuit and provides additional heat dissipation - particularly useful for tuned setups...
Available
€16.95
*
This compact flow-through cooler is the perfect addition for water-cooled engines where every degree counts. It is installed directly in the cooling circuit and provides additional heat dissipation - particularly useful for tuned setups...
Available
€16.95
*
The aluminum elements of this fuel filter are available in different colors. This allows the filter and hoses to be visually matched. The connection width of the filter is 7 mm. The fuel hoses we offer are therefore a perfect fit.
Available
€9.99
*
This item is an inexpensive alternative to the original spare part. The seal corresponds to the original in terms of dimensions and function. OEM part number for comparison purposes: 1A007851
Available
€33.95
*
;
€29.95
*
Complete overhaul kit for the Rotax 122 & 123 125cc engine. The set consists of all necessary gearbox and crankshaft bearings, as well as the appropriate sealing rings. If major repairs and splitting of the engine are planned, it is...
Available
€59.95
*
Bei diesem Artikel handelt es sich um eine günstige Alternative zum teuren Originalersatzteil. Der Benzinhahn kann mit allen Setuos verwendet werden, die einen entsprechend großen Anschluss haben. Wir empfehlen, den O-Ring zusätzlich mit...
Available
€6.99
*
;
€4.49
*
Replacement crankshaft from the house R&D, made in Europe and exact copy of the Rotax 122/123 original - crankshaft. Since the Rotax engine usually already belongs to the older semesters, we generally recommend before installing the...
Available
€239.90
*
Here we offer a vacuum fuel tap for all motorcycle models with carburetor. The fuel tap is simply pushed into the tank instead of the old one and can also be used to convert from manual operation to automatic operation. We recommend to...
Available
€8.99
*
Here we offer a simple choke, with an actuator, which can be installed in the fairing of the vehicle as desired. The lever is delivered with a cable pull, can only be used in vehicles with carburetor.
Available
€12.99
*
Athena, an international company founded in 1973, designs and manufactures gaskets, technical spare parts and metal components for the industrial and motorcycle sector according to the highest quality standards UNI EN ISO 9001, 9002,...
Available
€109.90
*
;
€89.95
*
Complete overhaul kit for the Rotax 122 & 123 125cc engine. The set consists of all necessary gearbox and crankshaft bearings, as well as the appropriate sealing rings. If major repairs and splitting of the engine are planned, it is...
Available
€49.95
*
An oil change also includes changing the filter. To prevent the filter chamber from leaking, the O-ring that seals it should always be replaced.
Available
€4.65
*
Replacement gaskets for the Piaggio 125cc 4-stroke engine, which was used for example in the Aprilia RS4 125.
Available
€89.90
*
;
€69.95
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
As some cylinders are only supplied with one gasket, the adjustment of timing and pinch point is often not easy to achieve. In such a case the real moped tuner always has a sheet of gasket material at hand, from which he can cut an...
Available
€2.49
*
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.
Available
€1.29
*
Cooling hoses with internal spiral for reinforcement. In contrast to the conventional black hoses, you can use the transparent cooling hoses to determine exactly whether there is still air in the cooling circuit to exclude possible...
Available
€14.99
*
;
From €9.99
*
Fuel hose with one meter length and 5mm inner diameter. In many different colours. In addition to its actual use as a petrol hose, it can also be used as a hose for many other purposes. Available in many different colours. The hose can...
Available
€2.00
*
NEW
Bei diesem Artikel handelt es sich um ein Originalersatzteil (OEM) der Firma Aprilia OEM Artikelnummer zu Vergleichszwecken : AP0259053 Lieferumfang: 1 stk.
Out of Stock
€26.95
*
NEW
Bei diesem Artikel handelt es sich um ein Originalersatzteil (OEM) der Firma Aprilia OEM Artikelnummer zu Vergleichszwecken : AP0250206 Lieferumfang: 1
Out of Stock
€39.95
*
NEW
Bei diesem Artikel handelt es sich um ein Originalersatzteil (OEM) der Firma Aprilia OEM Artikelnummer zu Vergleichszwecken : AP8201824 Lieferumfang: 1
Out of Stock
€29.95
*
NEW
Bei diesem Artikel handelt es sich um ein Originalersatzteil (OEM) der Firma Aprilia OEM Artikelnummer zu Vergleichszwecken : AP0650131 Lieferumfang: 1
Out of Stock
€55.95
*
NEW
Bei diesem Artikel handelt es sich um ein Originalersatzteil (OEM) der Firma Aprilia OEM Artikelnummer zu Vergleichszwecken : AP0259325 Lieferumfang: 1
Out of Stock
€74.95
*
Viewed