Tip Use our  Bike-Filter to get only suitable articles displayed.
0 Article
 

Aprilia RX 125 Cooling system

1. Choose model
RX/SX 125 (ab 2021, KT - Euro5)
RX 125 (2018 bis 2020, KXA - Euro4)
Close filters
1 From 2
No results were found for the filter!
Clamp
Clamp, universal, for example f. petrol, water or oil hoses, 6mm
6mm clamp for fuel hoses. Delivered is 1 piece.

Available

€1.99 *
Hose clamp
Hose clamp, large, d=32mm, stainless
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.

Available

€1.29 *
Cooling water hose transparent
Cooling water hose transparent, with steel spiral, d=19x26mm, 1 meter
Cooling hoses with internal spiral for reinforcement. In contrast to the conventional black hoses, you can use the transparent cooling hoses to determine exactly whether there is still air in the cooling circuit to exclude possible...

Available

€14.99 * ; €12.99 *
NEW
Wasserpumpendeckel Piaggio OEM
Wasserpumpendeckel Piaggio OEM, Aprilia RX/SX from year 21
Wasserpumpendeckel Aprilia OEM OEM Teilenummer: 1A017960

Almost gone

€37.95 *
NEW

Out of Stock

€16.99 *
NEW

Almost gone

€22.95 *
NEW
Clamp water pump Piaggio OEM
Clamp water pump Piaggio OEM, universal for Aprilia, Derbi, Vespa
This item is an original spare part from the Piaggio brand. OEM part number for comparison purposes: CM001907

Available

€1.99 *
Oil seal / cooling water circuit Piaggio OEM
Oil seal / cooling water circuit Piaggio OEM, Piaggio/Aprilia Motoren E3 & E4, 20x30x5
This item is an original product (OEM) of the Piaggio brand OEM part number for comparison purposes : 82897R

Available

€11.99 *
Water pump rotor Piaggio OEM
Water pump rotor Piaggio OEM, Aprilia RS/RX/SX Bj. 11-20 Derbi Senda Bj. 10-16
This article is an original product (OEM) from Piaggio OEM part number for comparison purposes : PIA-871358

Out of Stock

€17.99 *
Water pump cover Aprilia
Water pump cover Aprilia, Aprilia M545 engines (RS4 / RS / RX / SX 125 4T)
Standard pump cover for Piaggio/ Aprilia M545 engines. OEM part number for comparison 871354

Out of Stock

€39.95 *
Wellendichtring Wasserpumpenwelle Piaggio OEM
Wellendichtring Wasserpumpenwelle Piaggio OEM, Aprilia M545 Motoren (RS4 / RS / RX / SX 125 4T)
Originalersatzteil von Aprilia. OEM Artikelnummer zu Vergleichszwecken 1A005891

Almost gone

€19.99 *
Cooling water hose Cooling water hose, 1m x 9mm, transparent
These cooling hoses have an internal spiral for reinforcement. In contrast to the conventional black hoses, the transparent cooling hoses allow you to determine exactly whether there is still air in the cooling circuit, in order to...

Available

€9.99 *
Cooling water hose Cooling water hose, universal, black
Dimensions: 12mm x 19mm Length: 1m

Available

€10.99 *
Cover thermostat housing Piaggio OEM
Cover thermostat housing Piaggio OEM, Aprilia RX/S 125 years 18-20, RS(4) 125 years 11-20, Tuono 125 years 17-20
This item is an original spare part of the brand Aprili/Piaggio OEM part number for comparison 898431

Available

€9.99 *
Cooling water hose Cooling water hose, with steel spiral,15mm, 1 meter, transparent
Transparent coolant hose with an inner diameter of 15mm. The length is 1m. Coolant hoses with an inner diameter of 15mm are usually used on mopeds with Minarelli engines. Practical side effect, you can see whether the cooling water is...

Available

€14.99 *
Dichtung Wasserpumpengehäuse Yamaha OEM
Dichtung Wasserpumpengehäuse Yamaha OEM, Yamaha YZF-R 125 Bj. 19-22, MT 125 Bj. 20-22, Beta RR ab Bj. 21
Bei diesem Artikel handelt es sich um ein Original Ersatzteil (OEM) der Marke Yamaha. OEM Artikelnummer zu Vergleichszwecken 2DPE24280000 Lieferumfang: 1 Stck.

Available

€9.99 *
Cooling water thermostat Piaggio OEM
Cooling water thermostat Piaggio OEM, Piaggio/Aprilia 125cc 4T "M545M" - Engine (Aprilia RS4, RX/SX 125, Derbi GPR,...
If your engine does not warm up properly in winter, it is usually due to a defective coolant thermostat. This small part is unfortunately often forgotten and poorly maintained on motorcycles, as it cannot influence the heating as it does...

Available

€24.99 *
Expansion tank cooling system Piaggio OEM
Expansion tank cooling system Piaggio OEM, Aprilia RX/SX 125 from 18 years old
This item is an original spare part (OEM) of the brand Piaggio (Aprilia). OEM part number for comparison purposes Piaggio: 2B004307 Scope of delivery: 1 pc.

Almost gone

€51.95 *
Gasket water pump Piaggio OEM
Gasket water pump Piaggio OEM, Aprilia/Piaggio 125 4T
This item is an original spare part (OEM) of the brand Piaggio (Aprilia). OEM part number for comparison purposes Piaggio: 871418 Scope of delivery: 1 pc.

Available

€4.99 *
1 From 2

The cooling system of your Aprilia RX 125 has an important task. It ensures that your bike does not overheat even under overheating even under heavy load. For this to work, the cooling system must function correctly. function properly. In the event of strong vibrations, the filigree cooling fins of the radiator can crack and leak. leakage can occur. Then you can find a replacement Kühler für your motorcycle.

Even more common, however, is that it comes with älteren RX 125 to cracks in the Kühlwasserschlauch, or the the thermostat no longer works correctly. If it runs completely blöd, lässt you your cooling water cap somewhere. For all these problems on the cooling system of your RX 125, we have the suitable spare parts.

Viewed