1. Choose model
Tuono 125 (ab 2025, XT (Euro5+))
Tuono 125 (2021 bis 2024, XA - Euro5)
Tuono 125 (2017 bis 2020, KC - Euro4)
No results were found for the filter!
This compact flow-through cooler is the perfect addition for water-cooled engines where every degree counts. It is installed directly in the cooling circuit and provides additional heat dissipation - particularly useful for tuned setups...
Available
€16.95
*
This compact flow-through cooler is the perfect addition for water-cooled engines where every degree counts. It is installed directly in the cooling circuit and provides additional heat dissipation - particularly useful for tuned setups...
Available
€16.95
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.
Available
€1.29
*
Cooling hoses with internal spiral for reinforcement. In contrast to the conventional black hoses, you can use the transparent cooling hoses to determine exactly whether there is still air in the cooling circuit to exclude possible...
Available
€14.99
*
;
From €9.99
*
NEW
Haltegummi Kühler, Außendurchmesser 23,5 mm x Innendurchmesser 11mm x Höhe 10 mm
Diese Gummibuchse für den Kühlerhalter dient zur sicheren und vibrationsarmen Lagerung des Kühlers. Sie dämpft Erschütterungen effektiv ab und schützt so den Kühler vor Beschädigungen. Durch das elastische Material sitzt sie passgenau...
Available
€3.99
*
NEW
Locking bolt, Screw and seal, various Sizes
The oil drain plug is a small but important spare part - it ensures that your engine oil remains safely in the engine housing and can be drained cleanly when changing the oil. If the thread is damaged or the old screw is twisted, this...
Out of Stock
€4.99
*
NEW
Retaining rubber radiator, 19x9,7x3x8, various colors Colors
Whether your radiator rattles or simply no longer sits properly - you can quickly remedy the situation with the right retaining rubber. This fastening element made of high-quality silicone is specially designed and ensures a secure,...
Available
€3.99
*
NEW
Retaining rubber radiator, 24,5x12,5x14x3mm, various colors Colors
If the radiator wobbles, rattles or is no longer secure, it's time for a fresh hold. This retaining rubber is exactly the right spare part for many models - and ensures that your radiator is securely mounted again without vibration. The...
Available
€4.99
*
Adapter für Temperatursensor Stage6 Adapter mit 22mm/18mm/16mm Außendurchmesser, zur einfachen Installation eines Temperaturgebers, z.B. von Stage6 oder Koso, in den Kühlkreislauf. Praktische Lösung, wenn das vorhandene Thermometer...
Available
€22.00
*
The VOCA Bestia CNC Flow Cooler is a high-quality flow cooler that has been specially developed for powerful 2-stroke engines. It optimizes cooling performance and ensures effective temperature control, especially for tuned or heavily...
Available
€25.95
*
The "T-Link" cooling pipe adapter is available for 16, 18 or 22 mm cooling pipes. The thermostat cooling tube adapter is the ideal connector for reading the cooling water temperature with VOCA or KOSO temperature gauges. The adapter can...
Almost gone
€24.95
*
This set contains: 1A017976 Water pump cover gasket 871358 Water pump rotor 1A005891 Water pump shaft oil seal 1A008740 Water pump shaft 82897R Oil seal / cooling water circuit If you need other parts for your cooling system, you can...
Almost gone
€139.90
*
Copper sealing ring, Copper, 14x18x1.5, f. Thermoswitch / Universal
Universally applicable copper sealing ring with the dimensions 14x18x1.5, usually used on Piaggio/Derbi/Aprilia engines as a seal for the thermal switch. However, it can be used for any other application.
Available
€2.79
*
Water pump cover Aprilia OEM OEM part number: 1A017960
Available
€37.95
*
Hose water pump Piaggio OEM OEM part number: 871450
Available
€16.99
*
Pumpenrohr Wasserpumpe Piaggio OEM OEM Teilenummer: 865655
Available
€22.95
*
Cap radiator Aprilia Original spare part OEM part numbers for comparison 861299
Available
€33.95
*
This item is an original spare part from the Piaggio brand. OEM part number for comparison purposes: CM001907
Available
€1.99
*
This item is an original product (OEM) of the Piaggio brand OEM part number for comparison purposes : 82897R
Available
€11.99
*
This article is an original product (OEM) from Piaggio OEM part number for comparison purposes : PIA-871358
Available
€17.99
*
Mounting bracket Schmitt, universell
Universal with rubber buffer, e.g. for radiators, tanks, custom panels etc...
Almost gone
€9.99
*
Standard pump cover for Piaggio/ Aprilia M545 engines. OEM part number for comparison 871354
Available
€40.95
*
Original spare part from Aprilia. OEM part number for comparison purposes 1A005891
Almost gone
€19.99
*
The cooling system of your Aprilia Tuono 125 has an important task. It ensures that your bike does not overheat even under overheating even under heavy load. For this to work, the cooling system must function correctly. function properly. In the event of strong vibrations, the filigree cooling fins of the radiator can crack and leak. leakage can occur. Then you can find a replacement Kühler für your motorcycle.
Even more common, however, is that it comes with älteren Tuono 125 to cracks in the Kühlwasserschlauch, or the the thermostat no longer works correctly. If it runs completely blöd, lässt you your cooling water cap somewhere. For all these problems on the cooling system of your Tuono 125, we have the suitable spare parts.
Viewed