1. Choose model
Mito 125 (2001 bis 2014, N300)
2. Filter by category
No results were found for the filter!
Needle roller bearing / Gearbox bearing / Shift drum bearing / Shaft bearing, universal, 10x10x14
This article is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and connections. It can be used in different places of different bikes. OEM part number for comparison...
Available
€2.99
*
Gearbox bearing / Needle roller bearing / Shift shaft bearing, universell, 12x16x10
This item is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and connections. It can be used in different places of different bikes. OEM part number for comparison...
Available
€2.99
*
ProTaper clutch fitting made of cold forged aluminum. The clutch fitting comes with quick adjustment as well as a bearing forged aluminum lever. The nylon ring on the clamping surface can prevent the armature from breaking in the event...
Available
€56.95
*
Cooling water hose, 1m x 9mm, transparent
These cooling hoses have an internal spiral for reinforcement. In contrast to the conventional black hoses, the transparent cooling hoses allow you to determine exactly whether there is still air in the cooling circuit, in order to...
Available
€9.99
*
Oil hose, 2,2x4mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,2mm Outer diameter: 4mm Length: 5m
Available
€3.49
*
Oil hose, 2,5x5mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,5mm Outer diameter: 5mm Length: 5m
Available
€3.99
*
Available
€8.29
*
Cooling water hose, with steel spiral,15mm, 1 meter, transparent
Transparent coolant hose with an inner diameter of 15mm. The length is 1m. Coolant hoses with an inner diameter of 15mm are usually used on mopeds with Minarelli engines. Practical side effect, you can see whether the cooling water is...
Available
€14.99
*
From the manufacturer Italkit comes a reed box type VForce. Italkit has developed a removable double prism reed box with carbon blades. It is specially designed to optimize gas circulation and flow. In addition, the inlet with a diameter...
Almost gone
€109.90
*
for cylinder models 60433 (old) and 73037 (modern). This valve is actuated by the exhaust gas pressure and opens in stages from 5,000 to 6,000 rpm. Homologation: No
Available
€119.90
*
Arrow replacement seal. Can be used not only with Arrow, but also with all other exhaust systems with 32mm diameter and plug-in flange. Technical data Diameter (inside): 32mm width: 30mm
Almost gone
€10.00
*
Clamps / hose clamps, 50 parts
Practical assortment box with different sizes of hose clamps. Should not be missing in any well-assorted workshop. Delivered are 10 clamps each in 6, 8, 10, 12 and 14mm diameter.
Available
€34.95
*
choke lever, Universal, various colors, for mounting on handlebars
Universal choke lever for custom conversions. Simple mounting with clamp, directly on the handlebars as mentioned, fits virtually any cable choke. Available in black & chrome.
Available
€10.99
*
Carburettor DellOrto PHBH 28 BS, universal
The PHBH 28mm version can be used as a replacement carburettor on various 125cc vehicles (e.g. RS 125). On 125s with a smaller carburettor, it can even have a slight performance-enhancing effect if tuned correctly. Note Does NOT have an...
Out of Stock
€139.90
*
Hose clamp, universal, 8 x 300mm
Practical set for assembling hose clamps yourself. Consisting of 8 screw clips and a 30cm long steel band. The band can be torn off in the desired length, then only the clip is attached and the clamp is ready for use. Notes Cut the tape...
Available
€5.99
*
Copper seal ring. Technical data Inner diameter: 31.50 mm Outside diameter: 40.00 mm thickness: 4 .00 mm
Available
€5.95
*
Replacement graphite manifold gasket. Fits in principle all vehicles with straight flange or plug-in flange connections up to 42mm diameter. (42mm is for example the original size of the Yamaha YI-3 & YI-4 engine).
Available
€4.99
*
Aluminium/steel manifold gasket from Athena. Can be used on all vehicles with the corresponding outlet dimension of 45mm diameter.
Available
€4.50
*
Fuel tap, universal, M16 x 1,5
Largely universal, vacuum-controlled petrol tap with screw connection. The scope of delivery also includes the pre-filter (tube), which sits in the petrol tap. Suitable for all petrol tanks with corresponding thread & vacuum connection....
Available
€10.99
*
Graphite sealing ring from Athena. Can be used in many different vehicles as a seal for overlapping plug connections.
Available
€13.95
*
Hose clamp assortment, 50 parts
Galvanized steel hose clamps with worm thread for attaching hoses to pipes and hose nozzles. Including 8mm socket wrench. Sizes: 12 x 13-19mm 12 x 16-22mm 10 x 18-27mm 7 x 20-32mm 5 x 22-38mm 3 x 24-44mm
Available
€27.95
*
18mm hose clamp from Piaggio, can of course be used on all vehicles. OEM part number for comparison purposes 879888; 256074; 577557; AP8104072
Available
€4.99
*
Available
€1.99
*
Available
€1.49
*
Viewed