1. Choose model
Senda DRD 125 (2010 bis 2016, DR/PK)
2. Filter by category
No results were found for the filter!
Cooling water hose, with steel spiral,15mm, 1 meter, transparent
Transparent coolant hose with an inner diameter of 15mm. The length is 1m. Coolant hoses with an inner diameter of 15mm are usually used on mopeds with Minarelli engines. Practical side effect, you can see whether the cooling water is...
Available
€14.99
*
This part is an original spare part of the Piaggio brand. Original part number for comparison purposes: 847214 can be used for various purposes.
Available
€4.99
*
Original spare part from Piaggio. Fits Clutch pressure plate / primary drive Piaggio OEM, Piaggio/Aprilia M545 engine OEM part number for comparison 847046, ODN00H02600181
Almost gone
€69.95
*
Replacement clutch drum for Piaggio/Aprilia M545 engine. OEM part number for comparison 847045, 00H02600111, ODN00H02600111
Available
€119.90
*
Gasket clutch cover OPM, Yamaha YBR, Derbi Senda, Rieju MRT/RS2
Replacement gasket for the clutch cover. We generally recommend replacing all gaskets when servicing the engine, as they are already removed anyway. It's always annoying when an old gasket starts to leak because it hasn't been replaced...
Almost gone
€9.99
*
Gasket ignition cover OPM, Yamaha YBR, Derbi Senda, Rieju MRT/RS2
Replacement gasket for the ignition cover. We generally recommend replacing all gaskets when servicing the engine, as they are already removed anyway. It's always annoying when an old gasket starts leaking because it wasn't replaced and...
Out of Stock
€8.99
*
Gasket set cylinder head OPM, Yamaha YBR/XT, Rieju RS 2, Derbi Senda 125
This is a complete set of gaskets for your cylinder head. We generally recommend replacing all gaskets when servicing the engine, as they are already removed anyway. It's always annoying when an old gasket starts leaking because it...
Almost gone
€14.95
*
This carburetor is recommended as a spare part for 125cc 4-stroke engines. It also fits Yamaha and Suzuki 4T engines. The Naraku PZ26 carburetor is equipped with manual flap choke. technical data: main jet: 85 (5mm) hole spacing intake...
Almost gone
€29.90
*
This item is an original spare part (OEM) of the brand Piaggio. OEM part number for comparison purposes 00H02810181, ODN00H02810181, 847545 Scope of delivery: 1 pc.
Available
€5.50
*
This item is an original spare part (OEM) of the brand Piaggio. OEM part number for comparison purposes 000H02810561, ODN00H02810561, 847541 Scope of delivery: 1 pc.
Available
€2.50
*
If your engine does not warm up properly in winter, it is usually due to a defective coolant thermostat. This small part is unfortunately often forgotten and poorly maintained on motorcycles, as it cannot influence the heating as it does...
Available
€25.95
*
This item is an original spare part (OEM) of the brand Piaggio (Aprilia). OEM part number for comparison purposes Piaggio: 871418 Scope of delivery: 1 pc.
Available
€4.99
*
The basis for an optimally functioning engine and good maintenance of your vehicle is a tight engine. An oil leak is not only bad for the environment, but can also lead to dicey situations in fast cornering. So if you discover a leak...
Almost gone
€20.90
*
Arrow replacement seal. Can be used not only with Arrow, but also with all other exhaust systems with 32mm diameter and plug-in flange. Technical data Diameter (inside): 32mm width: 30mm
Available
€10.00
*
Clamps / hose clamps, 50 parts
Practical assortment box with different sizes of hose clamps. Should not be missing in any well-assorted workshop. Delivered are 10 clamps each in 6, 8, 10, 12 and 14mm diameter.
Available
€34.95
*
Oil contamination on the underbody or on the engine is due to a defective seal. In many cases the valve cover gasket is the cause. When servicing the valve train, it is often not replaced. In general, seals should always be replaced to...
Out of Stock
€53.95
*
Hose clamp, universal, 8 x 300mm
Practical set for assembling hose clamps yourself. Consisting of 8 screw clips and a 30cm long steel band. The band can be torn off in the desired length, then only the clip is attached and the clamp is ready for use. Notes Cut the tape...
Available
€5.99
*
Copper seal ring. Technical data Inner diameter: 31.50 mm Outside diameter: 40.00 mm thickness: 4 .00 mm
Almost gone
€5.95
*
Replacement graphite manifold gasket. Fits in principle all vehicles with straight flange or plug-in flange connections up to 42mm diameter. (42mm is for example the original size of the Yamaha YI-3 & YI-4 engine).
Available
€4.99
*
Aluminium/steel manifold gasket from Athena. Can be used on all vehicles with the corresponding outlet dimension of 45mm diameter.
Almost gone
€4.50
*
Fuel tap, universal, M16 x 1,5
Largely universal, vacuum-controlled petrol tap with screw connection. The scope of delivery also includes the pre-filter (tube), which sits in the petrol tap. Suitable for all petrol tanks with corresponding thread & vacuum connection....
Available
€10.99
*
The timing chain tensioner is an important component. In the event of a defect, it can even lead to engine damage. Due to the pressure that the tensioner puts on the timing chain, it is always optimally tensioned. If this is not the...
Out of Stock
€20.95
*
Paper seal to seal the timing chain housing. Should be replaced during all maintenance work on the timing chain tensioner. OEM part number for comparison purposes 430350; 834254; 862777; AP8550429; AP8575011; 847928
Available
€3.19
*
A rattling noise from the engine can often be explained by a worn timing chain. Poor oil or few oil changes will damage the timing chain. In addition, a defective timing chain tensioner can lead to problems with the chain. In order to...
Out of Stock
€99.90
*
;
€69.95
*
Viewed