No results were found for the filter!
Exhaust clamp, M6, 32-35mm, stainless steel
Exhaust clamp for the pipe connection of the exhaust system. Via rubber sleeves, the diameter can also be varied. Watch out, however, that the rubber must be heat resistant!
Available
€3.99
*
Tire lever 101-Octane, 240mm
Tyre mounting lever with 240mm length. The lever is equipped with a special "scoop" for optimal grip during the mounting process.
Available
€6.99
*
Rim protector 101-Octane, universal, 2 pieces
This rim protector forms the base for the tyre lever during tyre fitting. Simply push it over the rim flange, ready. The tire lever can now not press scratches or dents in the rim. The paint of the rim remains undamaged. Universally...
Available
€4.99
*
Rubber washer fairing screw, 5,5x14x1,5mm, 10 piece
Universal rubber rings for use under fairing screws. The rubber ring protects the paintwork / attachments from pressure points. 10 pieces of rubber rings 5,5x14x1,5mm are delivered.
Available
€2.99
*
Cable clamp / Isolating clamp, universal
Universal cable lug pliers / stripper with 200mm length for stripping, crimping and cutting cables and cable lugs on the moped but also everywhere else. The pliers have various sizes and widths, so that you can cut and strip pretty much...
Almost gone
€4.99
*
Piston assembly tool 101-Octane, 45-80mm
Very helpful tool for mounting the piston into the cylinder. Who does not know the problem that the piston rings are under so much tension that the assembly in the cylinder becomes a game of patience or even break rings. With this tool...
Out of Stock
€14.99
*
Telescopic magnetic bar gripper, 190-800mm, pulling force 3.6kg
Pick-up tool with LED This telescopic gripper is a very practical tool for reaching hard-to-reach places. With practical retaining clip. Telescopic arm can be adjusted from 190 to 800 mm, the pulling force of the magnet is approx. 3.6...
Almost gone
€9.90
*
Quick release fairing bolt set, 6mm, 10 stck.
Every owner of a racing bike knows how annoying it is to have to dismantle half the fairing for the smallest work steps on the moped. With this quick release set, the annoying screws of the past. The actual screws are provided with an...
Almost gone
€39.95
*
Screw, M8 x 25 mm, flat head / internal hexagon (Allen), stepped
These bolts are usually used as brake disc bolts or sprocket bolts. Thread: M8 Head: Flat / Allen Length: 25 mm
Available
€2.49
*
Screw, M6 x 18mm, hexagon socket (Allen), V2A
Universal stainless steel screw with hexagon socket and cylindrical head. Technical data Thread: M6 Length: 18 mm
Available
€1.29
*
Screw, M6 x 30mm, hexagon socket (Allen)
Universal, zinc-plated (stainless) standard screw with hexagon socket (Allen) and cylindrical head. Technical data Thread: M6 Length: 30 mm
Available
€1.29
*
Screw, M6 x 16 mm, hexagon socket, flat head
Round head hexagon socket screw, such screws are often used for fairing parts. Technical data Head: Flat / Round Thread: M6 Length: 16 mm
Available
€1.29
*
Screw, M4 x 8mm, countersunk head/cross recess, black
For example for various brake pump covers, but can of course also be used everywhere else. Technical data Thread: M4 Head: countersunk / cross recess Length: 12 mm
Available
€1.29
*
Rust & Underbody Protection Spray, Spray can, 500ml
E.g. suitable for painting frame parts that are sensitive to rust
Available
€11.99
*
Screws pack of 10, Hexagon socket (Allen), Cylindrical head
Offset screw with cylindrical head and hexagon socket. Finds its place on every moped somewhere... Scope of delivery 10 pcs. Technical Data DIN: 912 ISO: 4762 Tensile strength: 8.8 Diameter: M6 Offset with shank
Available
€8.99
*
Nut assortment, M3, 4, 5, 6, 8, 10 & 12, with plastic fuse
When it comes to screwing, a nut is quickly lost ... We offer here an assortment consisting of a total of 320 nuts in different sizes.
Almost gone
€25.95
*
Professional vehicle connector set 9-piece, with seal and pins
Proper vehicle electronics are the be-all and end-all. In addition, botched wiring can trigger short circuits, which in extramfall can even lead to a fire. In addition, these plugs are 100% waterproof when used correctly, as well as...
Almost gone
€21.95
*
Guide clip, universal, f. Cables and hoses
This is a(n) retaining clamp/guide clip for various cable guides on many bikes. Dimensions: - Material thickness: 5mm - Inside: 15mm - Outside: 20mm - Insertion length: 12mm OEM part number for comparison 00H02201591
Almost gone
€2.49
*
Available
€10.99
*
Screw / Dummy plug, M12x1.25
Screw with thread size M12x1.25. Can be used to close water connections in the cylinder head, for example. But it is also possible to use it as a drain plug and plug in many other applications. Delivery incl. copper gasket.
Available
€10.99
*
Sheet metal nut set, Metric thread (M8), 10 pcs.
Here we offer a set of sheet metal nuts with a metric thread. Threaded screws with an 8 mm thread (M8) can be attached to this type of sheet metal nut. Scope of delivery 10 pcs.
Available
€10.99
*
Professional vehicle plug, with seal and pins, 3-pole
Proper vehicle electronics is the be-all and end-all. In addition, faulty wiring can cause short circuits, which can even lead to a fire in extreme cases. In addition, these plugs are 100% waterproof when used correctly, and resistant to...
Available
€2.69
*
Brake hose, Rieju Marathon, L=1200mm, Front
Steel braided replacement brake hose for Rieju Marathon. Technical data Connections: Eye - Eye Angle: 1x 30°, 1x 70 Length: 120cm / 1,2m
Available
€30.95
*
Clutch lever, Beta RR from year 2012, red anodized
Red anodized clutch lever for Beta RR models from 2012. The lever corresponds in shape and construction to the factory mounted clutch lever, but in red.
Available
€9.99
*
Viewed