No results were found for the filter!
Cap nuts / trim nut set, M7, 4 Stck
These nuts are suitable for use as cylinder head nuts, for example.
Available
€5.99
*
Hose plug set, 3-8mm
During maintenance work, it is always necessary to close an open hose connection so that liquids remain where they belong. We offer this practical set, each consisting of three plugs of different thicknesses, which are inserted into the...
Available
€5.99
*
Almost gone
€11.99
*
Grinding sleeves Rotation tool, 3,17mm, 7-piece, wide
A set of wide grinding sleeves with 12.7mm inner diameter for all rotary tools with 3.17mm mounting shank. For example 40426
Out of Stock
€3.50
*
Available
€3.50
*
Tire Bundle "Enduro" Fortune, 80/90-21 & 110/80-18 + Free tire shine foam from Presto
New tires are needed - Why not get them in a complete package? FORTUNE is known for producing tires with an outstanding price-performance ratio. In the design, the main focus was on robustness, low rolling resistance, low noise and aging...
Out of Stock
€100.90
*
Outer casing throttle cable, universal, different colours
This inexpensive cover offers itself , in order to adapt the throttle cable in colour to your bike. Dimensions Length: 2,5m Diameter 5mm
Available
€3.99
*
Rubber bearing exhaust mounting Watts, Universal, various colours
Colored rubber bearing for mounting the exhaust. It counteracts the expansion and contraction of the metal caused by heat development and thus prevents cracks in the frame or exhaust itself.
Almost gone
€9.99
*
Turn signal, Turn signal, Aprilia RS, Tuono 125 My. 99-05, front right / rear left
Complete replacement turn signal suitable front right or rear left for Aprilia RS 125 and Tuono 125 (03-04). The turn signal is ideal as a spare part - replace and you're done. OEM part number for comparison 8127536
Available
€9.99
*
Exhaust clamp, M6, 32-35mm, stainless steel
Exhaust clamp for the pipe connection of the exhaust system. Via rubber sleeves, the diameter can also be varied. Watch out, however, that the rubber must be heat resistant!
Available
€3.99
*
Tire lever 101-Octane, 240mm
Tyre mounting lever with 240mm length. The lever is equipped with a special "scoop" for optimal grip during the mounting process.
Available
€6.99
*
Rim protector 101-Octane, universal, 2 pieces
This rim protector forms the base for the tyre lever during tyre fitting. Simply push it over the rim flange, ready. The tire lever can now not press scratches or dents in the rim. The paint of the rim remains undamaged. Universally...
Available
€4.99
*
Rubber washer fairing screw, 5,5x14x1,5mm, 10 piece
Universal rubber rings for use under fairing screws. The rubber ring protects the paintwork / attachments from pressure points. 10 pieces of rubber rings 5,5x14x1,5mm are delivered.
Available
€2.99
*
Cable clamp / Isolating clamp, universal
Universal cable lug pliers / stripper with 200mm length for stripping, crimping and cutting cables and cable lugs on the moped but also everywhere else. The pliers have various sizes and widths, so that you can cut and strip pretty much...
Available
€4.99
*
Piston assembly tool 101-Octane, 45-80mm
Very helpful tool for mounting the piston into the cylinder. Who does not know the problem that the piston rings are under so much tension that the assembly in the cylinder becomes a game of patience or even break rings. With this tool...
Available
€14.99
*
Telescopic magnetic bar gripper, 190-800mm, pulling force 3.6kg
Pick-up tool with LED This telescopic gripper is a very practical tool for reaching hard-to-reach places. With practical retaining clip. Telescopic arm can be adjusted from 190 to 800 mm, the pulling force of the magnet is approx. 3.6...
Available
€9.90
*
Quick release fairing bolt set, 6mm, 10 stck.
Every owner of a racing bike knows how annoying it is to have to dismantle half the fairing for the smallest work steps on the moped. With this quick release set, the annoying screws of the past. The actual screws are provided with an...
Almost gone
€39.95
*
Screw, M8 x 25 mm, flat head / internal hexagon (Allen), stepped
These bolts are usually used as brake disc bolts or sprocket bolts. Thread: M8 Head: Flat / Allen Length: 25 mm
Available
€2.49
*
Screw, M6 x 18mm, hexagon socket (Allen), V2A
Universal stainless steel screw with hexagon socket and cylindrical head. Technical data Thread: M6 Length: 18 mm
Available
€1.29
*
Screw, M6 x 30mm, hexagon socket (Allen)
Universal, zinc-plated (stainless) standard screw with hexagon socket (Allen) and cylindrical head. Technical data Thread: M6 Length: 30 mm
Available
€1.29
*
Screw, M6 x 16 mm, hexagon socket, flat head
Round head hexagon socket screw, such screws are often used for fairing parts. Technical data Head: Flat / Round Thread: M6 Length: 16 mm
Available
€1.29
*
Screw, M4 x 8mm, countersunk head/cross recess, black
For example for various brake pump covers, but can of course also be used everywhere else. Technical data Thread: M4 Head: countersunk / cross recess Length: 12 mm
Available
€1.29
*
Rust & Underbody Protection Spray, Spray can, 500ml
E.g. suitable for painting frame parts that are sensitive to rust
Available
€11.99
*
Screws pack of 10, Hexagon socket (Allen), Cylindrical head
Offset screw with cylindrical head and hexagon socket. Finds its place on every moped somewhere... Scope of delivery 10 pcs. Technical Data DIN: 912 ISO: 4762 Tensile strength: 8.8 Diameter: M6 Offset with shank
Available
€8.99
*
Viewed