Tip Use our  Bike-Filter to get only suitable articles displayed.
0 Article
 

KTM Duke 125 Cooling system

1. Choose model
Duke 125 (ab 2024, IS DK A (Euro 5+))
Duke 125 (2021 bis 2023, IS DUKE - Euro5)
Duke 125 (2017 bis 2020, IS DUKE - Euro4)
Duke 125 (2011 bis 2016, Euro3)
Filter
Close filters
2 From 2
No results were found for the filter!
Cooling water thermostat KTM OEM
Cooling water thermostat KTM OEM, KTM Duke 125/390 from year 14, RC 125/390 from year 16 onwards
The coolant thermostat is an important part of the cooling system. If it no longer opens or closes correctly, the engine can overheat or undercool while driving. In the worst case, this can lead to engine damage. Therefore, you should...

Available

€31.95 *
Clamps / hose clamps Clamps / hose clamps, 50 parts
Practical assortment box with different sizes of hose clamps. Should not be missing in any well-assorted workshop. Delivered are 10 clamps each in 6, 8, 10, 12 and 14mm diameter.

Available

€34.95 *
Hose clamp Hose clamp, universal, 8 x 300mm
Practical set for assembling hose clamps yourself. Consisting of 8 screw clips and a 30cm long steel band. The band can be torn off in the desired length, then only the clip is attached and the clamp is ready for use. Notes Cut the tape...

Available

€5.99 *
Hose clamp assortment Hose clamp assortment, 50 parts
Galvanized steel hose clamps with worm thread for attaching hoses to pipes and hose nozzles. Including 8mm socket wrench. Sizes: 12 x 13-19mm 12 x 16-22mm 10 x 18-27mm 7 x 20-32mm 5 x 22-38mm 3 x 24-44mm

Available

€27.95 *
Clamp Piaggio OEM
Clamp Piaggio OEM, Universal, D= 18mm
18mm hose clamp from Piaggio, can of course be used on all vehicles. OEM part number for comparison purposes 879888; 256074; 577557; AP8104072

Available

€4.99 *
Cooler Naraku
Cooler Naraku, KTM Duke 125 to year 16, handmade
Handmade radiator with 20% more cooling capacity suitable for KTM 125 Duke & 390. With this cooler, different material thicknesses are used. In places subject to particularly high stress, such as brackets, the material is stronger and...

Available

€199.90 *
Temperature sensor adapter Koso
Temperature sensor adapter Koso, various sizes
If you don't want to change the thermometer in the cylinder head, or the thread doesn't fit, we can offer you this nice anodized adapter which is simply put between the cooling hose. Fits in combination with Stage6 Multimeter & Koso PRO...

Available

€28.95 *
2 From 2

The cooling system of your KTM Duke 125 has an important task. It ensures that your bike does not overheat even under overheating even under heavy load. For this to work, the cooling system must function correctly. function properly. In the event of strong vibrations, the filigree cooling fins of the radiator can crack and leak. leakage can occur. Then you can find a replacement Kühler für your motorcycle.

Even more common, however, is that it comes with älteren Duke 125 to cracks in the Kühlwasserschlauch, or the the thermostat no longer works correctly. If it runs completely blöd, lässt you your cooling water cap somewhere. For all these problems on the cooling system of your Duke 125, we have the suitable spare parts.

Viewed