1. Choose model
Duke 125 (ab 2024, IS DK A (Euro 5+))
Duke 125 (2021 bis 2023, IS DUKE - Euro5)
Duke 125 (2017 bis 2020, IS DUKE - Euro4)
Duke 125 (2011 bis 2016, Euro3)
2. Filter by category
No results were found for the filter!
NEW
The Radical RaceFlow 125 ECU is your ideal entry into the world of plug & play ECU tuning. Simple, effective, and completely risk-free, without having to interfere with your motorcycle's original software. The compact tuning control unit...
Out of Stock
€279.90
*
;
€199.90
*
This compact flow-through cooler is the perfect addition for water-cooled engines where every degree counts. It is installed directly in the cooling circuit and provides additional heat dissipation - particularly useful for tuned setups...
Available
€16.95
*
This compact flow-through cooler is the perfect addition for water-cooled engines where every degree counts. It is installed directly in the cooling circuit and provides additional heat dissipation - particularly useful for tuned setups...
Available
€16.95
*
Dies ist ein Ersatzspanner der Marke OEM Level. Er ist in gleicher Bauweise des originalen Teils und steht diesem auch in Punkto Qualität nichts nach. OEM Level Artikel verfügen über mindestens die gleiche Qualität wie das...
Available
€49.95
*
Einfaches und effektives Optiktuning für den kleinen Geldbeutel. es müssen keine Verkleidungsteile verändert werden wird an originalen Punkte befestigt perfekte Passform stilvolle Optik und optimaler Schutz einfache Montage
Available
€15.99
*
In contrast to the conventional cover, the Radical clutch housing is equipped with a viewing window, which allows you to check the quality of the oil and also gives you a cool visual bonus and makes the clutch mechanism visible. The...
Almost gone
€349.90
*
;
€299.00
*
Der Steuerkettenspanner ist ein wichtiges Bauteil. Bei einem Defekt kann es sogar zu einem Motorschaden führen. Durch den Druck, den der Spanner auf die Steuerkette legt wird diese immer optimal gespannt. Ist das nicht der Fall kann die...
Available
€39.95
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
As some cylinders are only supplied with one gasket, the adjustment of timing and pinch point is often not easy to achieve. In such a case the real moped tuner always has a sheet of gasket material at hand, from which he can cut an...
Available
€2.49
*
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.
Available
€1.29
*
Cooling hoses with internal spiral for reinforcement. In contrast to the conventional black hoses, you can use the transparent cooling hoses to determine exactly whether there is still air in the cooling circuit to exclude possible...
Available
€14.99
*
;
From €9.99
*
Fuel hose with one meter length and 5mm inner diameter. In many different colours. In addition to its actual use as a petrol hose, it can also be used as a hose for many other purposes. Available in many different colours. The hose can...
Available
€2.00
*
NEW
Adjustment screw for clutch cable, Various colors, 30 mm, M10, CNC aluminum
The CNC-milled aluminum clutch adjustment screw allows you to adjust your clutch cable quickly and precisely. The large adjustment wheel allows you to adjust the clutch play cleanly and in a controlled manner – even on the road without...
Available
€7.99
*
NEW
ECU Chip Tuning Module Racedynamics FuelX Lite, KTM Duke 125, built in 2024
The FuelX Lite Autotune is an electronic add-on module for optimizing fuel injection in the KTM Duke 125 Euro 5 (model year 2024). Due to strict emissions regulations, modern production engines are often tuned very lean, which can be...
Almost gone
€265.90
*
NEW
ECU Chiptuning Module Racedynamics FuelX Pro, KTM Duke, built in 2024
With FuelX Pro+, you can specifically improve the performance of your KTM Duke. The module precisely adjusts the air-fuel mixture so that the engine responds more directly to throttle commands, power delivery is smooth, and handling...
Almost gone
€345.90
*
NEW
ECU Chiptuning Modul Racedynamics Powertronic V4, KTM Duke 125, model years 2020–2023
The Racedynamics PowerTRONIC V4 is an ECU add-on module for optimizing engine control for your KTM Duke (model years 20-23). You benefit from noticeably faster response , especially in the partial load range. Transitions are smoother,...
Almost gone
€389.90
*
NEW
KTM original repair kit for the pinion shaft. Consisting of / Scope of delivery Bearing O-ring 17.5x1.5mm Shaft seal 25x37x6mm Retaining ring 37x1.5mm Sliding bushing OEM part numbers for comparison purposes KTM: 00050000982;...
Almost gone
€22.95
*
NEW
Original bearing from KTM. Size: 15x35x11mm OEM item number for comparison purposes KTM: 90130004003
Available
€10.99
*
Retaining rubber radiator, Outer diameter 23.5 mm x inner diameter 11 mm x height 10 mm
This rubber bushing for the radiator bracket is used for secure and low-vibration mounting of the radiator. It effectively absorbs vibrations and thus protects the radiator from damage. Thanks to the elastic material, it fits perfectly...
Available
€3.99
*
Locking bolt, Screw and seal, various Sizes
The oil drain plug is a small but important spare part - it ensures that your engine oil remains safely in the engine housing and can be drained cleanly when changing the oil. If the thread is damaged or the old screw is twisted, this...
Available
€4.99
*
Manual choke cable Motoforce, PWK / CP / Flat Slide carburetor, red
The manual choke for PWK and Polini CP carburetors gives you full control over the cold start of your scooter or moped. Instead of relying on an automatic choke, you can now adjust the fuel/air mixture manually. This ensures reliable...
Available
€6.90
*
Retaining rubber radiator, 19x9,7x3x8, various colors Colors
Whether your radiator rattles or simply no longer sits properly - you can quickly remedy the situation with the right retaining rubber. This fastening element made of high-quality silicone is specially designed and ensures a secure,...
Available
€3.99
*
Retaining rubber radiator, 24,5x12,5x14x3mm, various colors Colors
If the radiator wobbles, rattles or is no longer secure, it's time for a fresh hold. This retaining rubber is exactly the right spare part for many models - and ensures that your radiator is securely mounted again without vibration. The...
Available
€4.99
*
This item is an original spare part from the KTM brand. OEM number for comparison purposes: 90132011010
Available
€155.95
*
Viewed