1. Choose model
Duke 125 (ab 2024, IS DK A (Euro 5+))
Duke 125 (2021 bis 2023, IS DUKE - Euro5)
Duke 125 (2017 bis 2020, IS DUKE - Euro4)
Duke 125 (2011 bis 2016, Euro3)
2. Filter by category
No results were found for the filter!
ECU Chip Tuning Module Racedynamics FuelX Lite, KTM Duke 125, built in 2024
The FuelX Lite Autotune is an electronic add-on module for optimizing fuel injection in the KTM Duke 125 Euro 5 (model year 2024). Due to strict emissions regulations, modern production engines are often tuned very lean, which can be...
Out of Stock
€265.90
*
ECU Chiptuning Module Racedynamics FuelX Pro, KTM Duke, built in 2024
With FuelX Pro+, you can specifically improve the performance of your KTM Duke. The module precisely adjusts the air-fuel mixture so that the engine responds more directly to throttle commands, power delivery is smooth, and handling...
Out of Stock
€345.90
*
ECU Chiptuning Modul Racedynamics Powertronic V4, KTM Duke 125, model years 2020–2023
The Racedynamics PowerTRONIC V4 is an ECU add-on module for optimizing engine control for your KTM Duke (model years 20-23). You benefit from noticeably faster response , especially in the partial load range. Transitions are smoother,...
Out of Stock
€389.90
*
KTM original repair kit for the pinion shaft. Consisting of / Scope of delivery Bearing O-ring 17.5x1.5mm Shaft seal 25x37x6mm Retaining ring 37x1.5mm Sliding bushing OEM part numbers for comparison purposes KTM: 00050000982;...
Almost gone
€22.95
*
Original bearing from KTM. Size: 15x35x11mm OEM item number for comparison purposes KTM: 90130004003
Available
€10.99
*
Retaining rubber radiator, Outer diameter 23.5 mm x inner diameter 11 mm x height 10 mm
This rubber bushing for the radiator bracket is used for secure and low-vibration mounting of the radiator. It effectively absorbs vibrations and thus protects the radiator from damage. Thanks to the elastic material, it fits perfectly...
Available
€3.99
*
Locking bolt, Screw and seal, various Sizes
The oil drain plug is a small but important spare part - it ensures that your engine oil remains safely in the engine housing and can be drained cleanly when changing the oil. If the thread is damaged or the old screw is twisted, this...
Available
€4.99
*
Manual choke cable Motoforce, PWK / CP / Flat Slide carburetor, red
The manual choke for PWK and Polini CP carburetors gives you full control over the cold start of your scooter or moped. Instead of relying on an automatic choke, you can now adjust the fuel/air mixture manually. This ensures reliable...
Out of Stock
€6.90
*
Retaining rubber radiator, 19x9,7x3x8, various colors Colors
Whether your radiator rattles or simply no longer sits properly - you can quickly remedy the situation with the right retaining rubber. This fastening element made of high-quality silicone is specially designed and ensures a secure,...
Available
€3.99
*
Retaining rubber radiator, 24,5x12,5x14x3mm, various colors Colors
If the radiator wobbles, rattles or is no longer secure, it's time for a fresh hold. This retaining rubber is exactly the right spare part for many models - and ensures that your radiator is securely mounted again without vibration. The...
Available
€4.99
*
This item is an original spare part from the KTM brand. OEM number for comparison purposes: 90132011010
Almost gone
€155.95
*
Fuel hose / petrol hose, 1m, neoprene, rubber compound, various diameters
Fuel hose / Petrol hose In the following variants: 6mm 7mm 8mm Length : 1m
Out of Stock
From €14.99
*
Adapter für Temperatursensor Stage6 Adapter mit 22mm/18mm/16mm Außendurchmesser, zur einfachen Installation eines Temperaturgebers, z.B. von Stage6 oder Koso, in den Kühlkreislauf. Praktische Lösung, wenn das vorhandene Thermometer...
Available
€22.00
*
This article is an original spare part (OEM) from KTM OEM part number for comparison purposes : 93034031010 Scope of delivery: 1
Almost gone
€20.95
*
This article is an original spare part (OEM) from KTM OEM part number for comparison purposes : 93034001000 Scope of delivery: 1
Almost gone
€55.95
*
This article is an original spare part (OEM) from KTM OEM part number for comparison purposes : 90534034300 Scope of delivery: 1
Almost gone
€4.20
*
The VOCA Bestia CNC Flow Cooler is a high-quality flow cooler that has been specially developed for powerful 2-stroke engines. It optimizes cooling performance and ensures effective temperature control, especially for tuned or heavily...
Available
€25.95
*
This article is an original spare part (OEM) from KTM OEM part number for comparison purposes : 90134005033 Scope of delivery: 1
Almost gone
€74.95
*
The "T-Link" cooling pipe adapter is available for 16, 18 or 22 mm cooling pipes. The thermostat cooling tube adapter is the ideal connector for reading the cooling water temperature with VOCA or KOSO temperature gauges. The adapter can...
Out of Stock
€24.95
*
This article is an original spare part (OEM) from KTM OEM part number for comparison purposes : 90132019000 Scope of delivery: 1
Available
€4.75
*
Reverse gearshift KTM OEM OEM part number: 90634031010
Almost gone
€19.99
*
This article is an original spare part (OEM) from KTM OEM part number for comparison purposes : 90230077000 Scope of delivery: 1
Available
€6.99
*
This article is an original spare part (OEM) from KTM OEM part number for comparison purposes : 90130036000 Scope of delivery: 1
Almost gone
€31.95
*
This article is an original spare part (OEM) from KTM OEM part number for comparison purposes : 90130035000 Scope of delivery: 1
Almost gone
€11.99
*
Viewed