1. Choose model
EXC 125 (1998 bis 2016)
EXC-F 250 (2017 bis 2019)
EXC-F 350 (2017 bis 2019)
EXC-F 350 (2020 bis 2023)
2. Filter by category
No results were found for the filter!
This compact flow-through cooler is the perfect addition for water-cooled engines where every degree counts. It is installed directly in the cooling circuit and provides additional heat dissipation - particularly useful for tuned setups...
Available
€16.95
*
This compact flow-through cooler is the perfect addition for water-cooled engines where every degree counts. It is installed directly in the cooling circuit and provides additional heat dissipation - particularly useful for tuned setups...
Available
€16.95
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
As some cylinders are only supplied with one gasket, the adjustment of timing and pinch point is often not easy to achieve. In such a case the real moped tuner always has a sheet of gasket material at hand, from which he can cut an...
Available
€2.49
*
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.
Available
€1.29
*
Cooling hoses with internal spiral for reinforcement. In contrast to the conventional black hoses, you can use the transparent cooling hoses to determine exactly whether there is still air in the cooling circuit to exclude possible...
Available
€14.99
*
;
From €9.99
*
Fuel hose with one meter length and 5mm inner diameter. In many different colours. In addition to its actual use as a petrol hose, it can also be used as a hose for many other purposes. Available in many different colours. The hose can...
Available
€2.00
*
NEW
Retaining rubber radiator, Outer diameter 23.5 mm x inner diameter 11 mm x height 10 mm
This rubber bushing for the radiator bracket is used for secure and low-vibration mounting of the radiator. It effectively absorbs vibrations and thus protects the radiator from damage. Thanks to the elastic material, it fits perfectly...
Available
€3.99
*
NEW
High-quality protection kit for engine and engine housing, specially developed to protect sensitive components against impacts, stone chips and tough riding conditions. The kit offers additional mechanical protection for the crankcase,...
Almost gone
€57.99
*
NEW
Locking bolt, Screw and seal, various Sizes
The oil drain plug is a small but important spare part - it ensures that your engine oil remains safely in the engine housing and can be drained cleanly when changing the oil. If the thread is damaged or the old screw is twisted, this...
Out of Stock
€4.99
*
NEW
Manual choke cable Motoforce, PWK / CP / Flat Slide carburetor, red
The manual choke for PWK and Polini CP carburetors gives you full control over the cold start of your scooter or moped. Instead of relying on an automatic choke, you can now adjust the fuel/air mixture manually. This ensures reliable...
Out of Stock
€6.90
*
NEW
Retaining rubber radiator, 19x9,7x3x8, various colors Colors
Whether your radiator rattles or simply no longer sits properly - you can quickly remedy the situation with the right retaining rubber. This fastening element made of high-quality silicone is specially designed and ensures a secure,...
Available
€3.99
*
NEW
Retaining rubber radiator, 24,5x12,5x14x3mm, various colors Colors
If the radiator wobbles, rattles or is no longer secure, it's time for a fresh hold. This retaining rubber is exactly the right spare part for many models - and ensures that your radiator is securely mounted again without vibration. The...
Available
€4.99
*
The EBC CK standard clutch plates correspond to the original plates in terms of dimensions and quantity. The lining material is cork-based with a high aluminum content to reduce wear and fading to a minimum. The highly compressed...
Available
€139.90
*
Fuel hose / petrol hose, 1m, neoprene, rubber compound, various diameters
Fuel hose / Petrol hose In the following variants: 6mm 7mm 8mm Length : 1m
Available
From €14.99
*
Inner clutch cover gasket Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts and metal components for the motorcycle sector.
Almost gone
€15.95
*
Oil filter cover gasket When changing the oil, it is advisable to change the seal as well, so the oil stays where it is...in the engine.
Almost gone
€3.99
*
Fuel filter, 7mm, various colors
The aluminum elements of this fuel filter are available in different colors. This allows the filter and hoses to be visually matched. The connection width of the filter is 7 mm. The fuel hoses we offer are therefore a perfect fit.
Available
€9.99
*
Adapter für Temperatursensor Stage6 Adapter mit 22mm/18mm/16mm Außendurchmesser, zur einfachen Installation eines Temperaturgebers, z.B. von Stage6 oder Koso, in den Kühlkreislauf. Praktische Lösung, wenn das vorhandene Thermometer...
Available
€22.00
*
The VOCA Bestia CNC Flow Cooler is a high-quality flow cooler that has been specially developed for powerful 2-stroke engines. It optimizes cooling performance and ensures effective temperature control, especially for tuned or heavily...
Available
€25.95
*
The "T-Link" cooling pipe adapter is available for 16, 18 or 22 mm cooling pipes. The thermostat cooling tube adapter is the ideal connector for reading the cooling water temperature with VOCA or KOSO temperature gauges. The adapter can...
Almost gone
€24.95
*
Copper sealing ring, Copper, 14x18x1.5, f. Thermoswitch / Universal
Universally applicable copper sealing ring with the dimensions 14x18x1.5, usually used on Piaggio/Derbi/Aprilia engines as a seal for the thermal switch. However, it can be used for any other application.
Available
€2.79
*
Mounting bracket Schmitt, universell
Universal with rubber buffer, e.g. for radiators, tanks, custom panels etc...
Almost gone
€9.99
*
Improve your motorcycle experience with the Uma Racing quick shift lever. This innovative accessory allows you to shift gears without the need for the clutch, while protecting your motorcycle transmission. Installation is as easy as can...
Almost gone
€259.90
*
Viewed