No results were found for the filter!
Handmade radiator with 20% more cooling capacity suitable for KTM 125 Duke & 390. With this cooler, different material thicknesses are used. In places subject to particularly high stress, such as brackets, the material is stronger and...
Available
€199.90
*
Spare gasket for the ignition cover.
Almost gone
€4.99
*
The cover of the cooling water tank of the MT is located deep down in the front spoiler. Unfortunately it gets lost very quickly even if it is not fixed properly. OEM part number for comparison purposes 5VK218750000
Out of Stock
€15.90
*
The cover of the cooling water tank of the YZF lies deep down in the shoring. Unfortunately it gets lost very quickly even if it is not fixed properly. OEM part number for comparison purposes 5DSF17710000
Available
€4.49
*
Original replacement chain tensioner from Yamaha. Fits Yamaha YZF-R125. OEM part number for comparison purposes 5LWE22100000
Available
€89.95
*
If the timing chain tensioner is replaced, it may be necessary to renew its seal as well. Here we offer this spare part original from Yamaha. OEM part number for comparison purposes 1DYE22130000
Available
€4.24
*
The timing chain rails perform an important task in the engine, as they protect the chain from contact with the housing and thus prevent increased wear. Unfortunately, however, these components themselves are subject to high stress. If...
Available
€9.99
*
The timing chain of modern 4-stroke engines is, compared to a timing belt, actually maintenance-free. However, at high mileage or other maintenance work, it may be useful to replace the chain. We offer here an original timing chain for...
Available
€29.95
*
The timing chain rails perform an important task in the engine, as they protect the chain from contact with the housing and thus prevent increased wear. Unfortunately, however, these components themselves are subject to high stress. If...
Available
€11.90
*
Copper seal ring. Inner diameter : 26,2 mm Outside diameter : 35 mm Thickness : 1,5 mm
Available
€3.99
*
Replacement gasket for the clutch cover of the Yamaha DT 125 engine which was used on the models R/RE/X from year 99-06.
Available
€7.99
*
Complete kit of all necessary gaskets for the Yamaha DT 125cc engine used by 99-06 on the R/RE/X models.
Available
€44.95
*
Spare gasket for the clutch cover of the Aprilia RS4 125 or all mopeds with Piaggio 125cc 4-T engine.
Available
€11.99
*
Replacement gaskets for the Yamaha DT 125 R/RE and X cylinders.
Available
€30.95
*
A well sealed motor is a basic prerequisite for proper functioning of the drive. A loss of oil can lead to gear damage or malfunction of the entire drive. Note: Illustration deviates!
Almost gone
€19.99
*
A well sealed motor is a basic prerequisite for proper functioning of the drive. A loss of oil can lead to gear damage or malfunction of the entire drive. Note: Illustration deviates!
Almost gone
€45.95
*
Timing chain tensioner seal Flat gasket KTM- Original spare part OEM part number for comparison purposes 90136003003
Almost gone
€3.50
*
Seal timing chain tensioner KTM, KTM Duke, RC 125/200/390, O-ring
Timing chain tensioner seal O-ring 10.15X1.5 mm Original spare part OEM part number for comparison purposes J770010015
Available
€2.19
*
The EBC CK standard clutch plates correspond to the original plates in dimension and quantity. The lining material is cork based with a high aluminium content to reduce wear and fading to a minimum. The highly compressed material...
Available
€35.95
*
Pneumatic exhaust system for the Aprilia RS 125 engine. Most people will have noticed on their 125cc Aprilia RS that when the engine is de-throttled the power is suddenly released at around 8000 rpm by opening the exhaust slide. As this...
Almost gone
€155.90
*
This wiring harness is needed to connect the Polini ECU device to Yamaha injectors.
Out of Stock
€24.95
*
Small component with great effect. The valve stem seal influences for example the oil consumption. Hard "stems" let oil run down the valve, which is then burned. Whenever work is carried out on the dismantled cylinder head, it is...
Available
€3.99
*
Reinforced clutch springs from EBC, 10% harder than the original springs. Shank remedy for slipping clutches by increasing performance.
Almost gone
€15.50
*
The Malossi Force Master II system primarily manipulates the injection times, which are passed on from the original control unit to the injection nozzle. This system is included in the 180cc cylinder kit. With three different...
Almost gone
€285.00
*
Du bist der stolze Besitzer eines 125er Motorrads und möchtest dein Bike auf Vordermann bringen? Dann bist du bei uns genau richtig! Als Experten für Motor-Ersatz- und Tuningteile bieten wir alles, was du für eine Optimierung deines Bikes brauchst.
Von neuen Zylinderkits und Kurbelwellen über hochwertige Auspuffanlagen, diverse Filter und Dichtungen bis hin zu Abdeckungen und Schrauben – bei uns findest du alles, was dein 125er Motorrad zu einem echten Unikat macht. Und das Beste daran: Unsere Produkte sind nicht nur von bester Qualität, sondern auch noch zu erschwinglichen Preisen zu bekommen.
Egal, ob du ein erfahrener Tuner bist oder gerade erst damit beginnst, dein Bike aufzumotzen: Mit unserem breiten Angebot an Motor-Ersatz- und Tuningteilen bist du für jede Situation gerüstet. Also worauf wartest du noch? Schau jetzt bei uns vorbei und mache dein 125er Motorrad zu deinem ganz persönlichen Traumbike!
Viewed