No results were found for the filter!
The Beta OEM bolt for the pinion retaining plate is a small but indispensable original part for your Beta RR 125. It secures the locking plate to the drive pinion and prevents the pinion nut from coming loose while riding - a crucial...
Available
€4.25
*
This item is an original spare part from the Piaggio brand. OEM number for comparison purposes: 00H01508181
Out of Stock
€29.95
*
Chain guard, Beta RR 125 ab Bj. 21
The high-quality metal chain guard for the Beta RR 50 from model year 2012 not only provides optimum protection for the chain, but is also an essential component for road approval. During a §57 inspection , a missing or defective chain...
Available
€46.95
*
Locking plate chain sprocket, Derbi Senda, Aprilia RX/SX Bj. 00-10, Aprilia RS 50 06-17/125 Bj. 11-20
Pinion locking plate with M4x10mm screws for Derbi Senda and Aprilia SX geared mopeds. This locking plate for the pinion is comparable to the OEM number 00H02810421. Scope of delivery as shown in the product image.
Available
€2.99
*
Available
€3.99
*
RK is the leading manufacturer of drive chains for motorcycles in Japan. For more than 40 years, RK has been supplying all well-known Japanese motorcycle manufacturers as original equipment. RK is also the first choice of many racing...
Out of Stock
€79.95
*
Motorcycle chains are an essential part of a motorcycle's drive system. It is important to keep the chains in good condition to ensure a safe and efficient ride. This DID drive chain is a high-quality replacement chain and perfect for...
Available
€64.95
*
JT's drive chain is characterized by the highest quality, as it uses cutting-edge technology and special steel alloys of the highest quality. A low weight is combined with maximum tensile strength. Replacement chains affect almost every...
Almost gone
€64.95
*
Quality sprocket from AFAM with 63 teeth and 428 pitch suitable for Beta RR 125 up to year 17
Almost gone
€39.95
*
Sprocket, Vent Baja/Derapage from year 21, 56 teeth, black, steel
The sprocket for your Vent Baja/Derapage is made of high-quality steel and ensures smooth power transmission to the rear wheel. In addition to chains etc., sprockets are also wearing parts that do not need to be replaced so often, but do...
Almost gone
€59.95
*
Chain guard, Aprilia RX/SX 125er ab Bj. 18, Black, reinforced
A reinforced chain guard for versch. Models. In black, it fits any conceivable color scheme and provides protection on the one hand from unnecessary wear and on the other hand from external influences such as stones, sticks, etc. OEM...
Out of Stock
€29.95
*
Chain guide swing arm, Beta RR 125 at Bj.
This plastic chain slider is easy to install and protects chain and swingarm alike from damage and unnecessary wear by reliably guiding the chain.
Available
€21.95
*
Chain guide, Rieju Marathon (MRT) 125 from model year 09 onwards
The advantage of this design is that when replacing a worn chain no cutting of the chain guide is required. Protects chain and swingarm alike from damage and unnecessary wear. OEM no. for comparison purposes : 0/000.710.0302,...
Almost gone
€26.95
*
DID is one of the leading manufacturers of moped and motorcycle chains. By the way, you can buy chain a little too long. Because the shortening of a too long chain, with eg. a chain breaker, is easier than the exchange of a too short...
Out of Stock
€90.95
*
As the successor to the proven 428H, the 428HD used a new technology for manufacturing the rolls. Previously, the rolls were wound from sheet metal strips, which created a seam and thus a weak point. With the new technology, the rollers...
Available
€32.95
*
This item is an original spare part (OEM) of the brand KTM. OEM part number for comparison purposes 90110084000 Scope of delivery: 1 pc.
Almost gone
€13.95
*
This item is an original spare part (OEM) of the brand Piaggio. OEM part number for comparison purposes 865736 Scope of delivery: 1 pc.
Out of Stock
€19.99
*
These bolts are usually used as brake disk or sprocket bolts. Although this is a Rieju original spare part, this bolt can of course also be used on all other vehicles and for every conceivable purpose. Technical data Thread: M6 Head:...
Available
€3.29
*
Original Rieju chain guard. For mounting above the swingarm. OEM part number for comparison 0/000.200.0400
Out of Stock
€53.95
*
Replacement chain guide or swing arm guard. Rieju original spare part. OEM part number for comparison purposes 0/000.360.5001
Available
€23.95
*
Chain guard, Beta RR 125 Bj. 12-19
Replacement chain guard for Beta RR motorcycles from 2012 onwards.
Available
€20.95
*
Screw / Sprocket bolt, M6x20 (DIN933), universal, 6 stck.
In the end it is a normal M6 8.8 DIN screw. Therefore it can be used almost universally. Here we offer a set of 6 screws. Scope of delivery: 6 pcs.
Available
€10.99
*
Pack of 5 screws, M6 x 20 mm, flat head / inside corner (Torx), stepped
Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm
Available
€9.99
*
Screw, M6, with collar, pack of 4
Collar screw with M6 thread and 16mm length is idr. used as brake disk screw. But it can also be used for everything else. Thread: M6 Head: 6 Kant length: 16 mm
Available
€5.49
*
Getting the gearing right on your 125 is important to make sure your bike always runs smoothly and you're safe on the road. The wrong gearing doesn't just hurt your acceleration – it can also shorten the life of your chain and sprockets.
So if you're looking for a new chain and sprocket kit for your 125, make sure the gearing is right. Lots of suppliers sell complete chain kits, but not all of them offer the right gearing for your bike. That's why it pays to spend a little time researching to find the perfect chain kit for your bike.
And if you're not sure how to check the gearing on your 125, you can always ask an expert. They'll be happy to help and advise you on which chain kit suits your bike best.
So remember: the right gearing is the key to safe, reliable riding fun on your 125!
Viewed