Tip Use our  Bike-Filter to get only suitable articles displayed.
Tip Nutze dein zuletzt gewähltes Bike, um nur passende Artikel angezeigt zu bekommen.
0 Article
 

Final Drive

Close filters
17 From 17
No results were found for the filter!
Chain tensioner KTM OEM
Chain tensioner KTM OEM, KTM Duke/RC 125/390 from model year 17 onwards
This item is an original spare part (OEM) of the brand KTM. OEM part number for comparison purposes 90110084000 Scope of delivery: 1 pc.

Available

€13.95 *
Chain tensioner Piaggio OEM
Chain tensioner Piaggio OEM, Aprilia RX/SX 125 from 18 years old
This item is an original spare part (OEM) of the brand Piaggio. OEM part number for comparison purposes 865736 Scope of delivery: 1 pc.

Out of Stock

€19.99 *
Bolt, chain wheel / brake disk Rieju OEM
Bolt, chain wheel / brake disk Rieju OEM, universal, M6x16, TX T-30
These bolts are usually used as brake disk or sprocket bolts. Although this is a Rieju original spare part, this bolt can of course also be used on all other vehicles and for every conceivable purpose. Technical data Thread: M6 Head:...

Available

€3.29 *
Chain Guard Rieju OEM
Chain Guard Rieju OEM, Rieju Marathon (MRT) 125
Original Rieju chain guard. For mounting above the swingarm. OEM part number for comparison 0/000.200.0400

Available

€53.95 *
Chain guide Rieju OEM
Chain guide Rieju OEM, Rieju Marathon (MRT) 125
Replacement chain guide or swing arm guard. Rieju original spare part. OEM part number for comparison purposes 0/000.360.5001

Available

€23.95 *
Chain guard Chain guard, Beta RR 125 Bj. 12-19
Replacement chain guard for Beta RR motorcycles from 2012 onwards.

Out of Stock

€20.95 *
Screw / Sprocket bolt Screw / Sprocket bolt, M6x20 (DIN933), universal, 6 stck.
In the end it is a normal M6 8.8 DIN screw. Therefore it can be used almost universally. Here we offer a set of 6 screws. Scope of delivery: 6 pcs.

Available

€10.99 *
Pack of 5 screws Pack of 5 screws, M6 x 20 mm, flat head / inside corner (Torx), stepped
Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm

Available

€9.99 *
Screw Screw, M6, with collar, pack of 4
Collar screw with M6 thread and 16mm length is idr. used as brake disk screw. But it can also be used for everything else. Thread: M6 Head: 6 Kant length: 16 mm

Available

€5.49 *
Screw, sprocket / brake disk Screw, sprocket / brake disk, M8 x 18 mm, flat head / hexagon socket (TX), stepped
These bolts are usually used as brake disk or sprocket bolts. Incl. dry threadlocker (blue - medium strength). Thread: M8 Head: Flat / TX Length: 18 mm

Available

€2.49 *
Sprocket locking plate
Sprocket locking plate, Aprilia RS / RS4 / Tuono 125 Bj. 17-19 Original spare part
Standard sprocket locking plate for RS / RS4 / Tuono. Fits all sprocket sizes.

Available

€5.19 *
Chain wheel bolt Chain wheel bolt, universal, M8x1,25x40mm
Stud bolt for universal use. Used on some vehicles, e.g. for fastening the chain wheel. (Yamaha MT 125 & YZF-R 125)

Available

€3.99 *
17 From 17

Getting the gearing right on your 125 is important to make sure your bike always runs smoothly and you're safe on the road. The wrong gearing doesn't just hurt your acceleration – it can also shorten the life of your chain and sprockets.

So if you're looking for a new chain and sprocket kit for your 125, make sure the gearing is right. Lots of suppliers sell complete chain kits, but not all of them offer the right gearing for your bike. That's why it pays to spend a little time researching to find the perfect chain kit for your bike.

And if you're not sure how to check the gearing on your 125, you can always ask an expert. They'll be happy to help and advise you on which chain kit suits your bike best.

So remember: the right gearing is the key to safe, reliable riding fun on your 125!

Viewed