1. Choose model
SM 125 HRD 4T (ab 2023)
No results were found for the filter!
This compact flow-through cooler is the perfect addition for water-cooled engines where every degree counts. It is installed directly in the cooling circuit and provides additional heat dissipation - particularly useful for tuned setups...
Available
€16.95
*
This compact flow-through cooler is the perfect addition for water-cooled engines where every degree counts. It is installed directly in the cooling circuit and provides additional heat dissipation - particularly useful for tuned setups...
Available
€16.95
*
Overheated engines often have a defective water pump, as a cause to complain. We can offer here a complete, pre-assembled replacement pump - simple plug & play. This article is a cheap alternative to the expensive original spare part....
Available
€119.95
*
;
€89.95
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.
Available
€1.29
*
Cooling hoses with internal spiral for reinforcement. In contrast to the conventional black hoses, you can use the transparent cooling hoses to determine exactly whether there is still air in the cooling circuit to exclude possible...
Available
€14.99
*
;
From €9.99
*
NEW
Haltegummi Kühler, Außendurchmesser 23,5 mm x Innendurchmesser 11mm x Höhe 10 mm
Diese Gummibuchse für den Kühlerhalter dient zur sicheren und vibrationsarmen Lagerung des Kühlers. Sie dämpft Erschütterungen effektiv ab und schützt so den Kühler vor Beschädigungen. Durch das elastische Material sitzt sie passgenau...
Available
€3.99
*
NEW
Locking bolt, Screw and seal, various Sizes
The oil drain plug is a small but important spare part - it ensures that your engine oil remains safely in the engine housing and can be drained cleanly when changing the oil. If the thread is damaged or the old screw is twisted, this...
Out of Stock
€4.99
*
NEW
Retaining rubber radiator, 19x9,7x3x8, various colors Colors
Whether your radiator rattles or simply no longer sits properly - you can quickly remedy the situation with the right retaining rubber. This fastening element made of high-quality silicone is specially designed and ensures a secure,...
Available
€3.99
*
NEW
Retaining rubber radiator, 24,5x12,5x14x3mm, various colors Colors
If the radiator wobbles, rattles or is no longer secure, it's time for a fresh hold. This retaining rubber is exactly the right spare part for many models - and ensures that your radiator is securely mounted again without vibration. The...
Available
€4.99
*
Adapter für Temperatursensor Stage6 Adapter mit 22mm/18mm/16mm Außendurchmesser, zur einfachen Installation eines Temperaturgebers, z.B. von Stage6 oder Koso, in den Kühlkreislauf. Praktische Lösung, wenn das vorhandene Thermometer...
Available
€22.00
*
The VOCA Bestia CNC Flow Cooler is a high-quality flow cooler that has been specially developed for powerful 2-stroke engines. It optimizes cooling performance and ensures effective temperature control, especially for tuned or heavily...
Available
€25.95
*
The "T-Link" cooling pipe adapter is available for 16, 18 or 22 mm cooling pipes. The thermostat cooling tube adapter is the ideal connector for reading the cooling water temperature with VOCA or KOSO temperature gauges. The adapter can...
Almost gone
€24.95
*
Copper sealing ring, Copper, 14x18x1.5, f. Thermoswitch / Universal
Universally applicable copper sealing ring with the dimensions 14x18x1.5, usually used on Piaggio/Derbi/Aprilia engines as a seal for the thermal switch. However, it can be used for any other application.
Available
€2.79
*
Mounting bracket Schmitt, universell
Universal with rubber buffer, e.g. for radiators, tanks, custom panels etc...
Almost gone
€9.99
*
Cooling water hose, 1m x 9mm, transparent
These cooling hoses have an internal spiral for reinforcement. In contrast to the conventional black hoses, the transparent cooling hoses allow you to determine exactly whether there is still air in the cooling circuit, in order to...
Available
€9.99
*
This item is an original spare part (OEM) of the brand Yamaha/Minarelli. OEM part number for comparison BK6E24100000 Scope of delivery: 1 pc.
Almost gone
€99.95
*
This article is a set of original spare parts (OEM) of the brand Yamaha/Minarelli. We have put together the following items to a set: 1x 2DPE24280000 - water pump housing gasket 1x 2DPE24500000 - water pump shaft 1x B63E22230000 - gasket...
Almost gone
€70.95
*
Available
€8.29
*
This item is an original spare part (OEM) of the brand Yamaha. OEM part number for comparison 2DPE24500000 Scope of delivery: 1 pc.
Almost gone
€31.90
*
This item is an original spare part (OEM) of the brand Yamaha/Minarelli. OEM part number for comparison 904300680300 Scope of delivery: 1 pc.
Available
€1.99
*
Cooling water hose, with steel spiral,15mm, 1 meter, transparent
Transparent coolant hose with an inner diameter of 15mm. The length is 1m. Coolant hoses with an inner diameter of 15mm are usually used on mopeds with Minarelli engines. Practical side effect, you can see whether the cooling water is...
Available
€14.99
*
This item is an original spare part (OEM) from the Yamaha brand. OEM part number for comparison purposes 2DPE24280000 Scope of delivery: 1 pc.
Almost gone
€9.99
*
Clamps / hose clamps, 50 parts
Practical assortment box with different sizes of hose clamps. Should not be missing in any well-assorted workshop. Delivered are 10 clamps each in 6, 8, 10, 12 and 14mm diameter.
Available
€34.95
*
The cooling system of your Sherco SM 125 HRD has an important task. It ensures that your bike does not overheat even under overheating even under heavy load. For this to work, the cooling system must function correctly. function properly. In the event of strong vibrations, the filigree cooling fins of the radiator can crack and leak. leakage can occur. Then you can find a replacement Kühler für your motorcycle.
Even more common, however, is that it comes with älteren SM 125 HRD to cracks in the Kühlwasserschlauch, or the the thermostat no longer works correctly. If it runs completely blöd, lässt you your cooling water cap somewhere. For all these problems on the cooling system of your SM 125 HRD, we have the suitable spare parts.
Viewed