1. Choose model
WR 125 X/R (2013 bis 2017, DE072 - Euro3)
WR 125 X/R (2009 bis 2013, DE071 - Euro3)
2. Filter by category
No results were found for the filter!
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.
Available
€1.29
*
Cooling hoses with internal spiral for reinforcement. In contrast to the conventional black hoses, you can use the transparent cooling hoses to determine exactly whether there is still air in the cooling circuit to exclude possible...
Available
€14.99
*
;
From €9.99
*
Fuel hose with one meter length and 5mm inner diameter. In many different colours. In addition to its actual use as a petrol hose, it can also be used as a hose for many other purposes. Available in many different colours. The hose can...
Available
€2.00
*
NEW
Retaining rubber radiator, Outer diameter 23.5 mm x inner diameter 11 mm x height 10 mm
This rubber bushing for the radiator bracket is used for secure and low-vibration mounting of the radiator. It effectively absorbs vibrations and thus protects the radiator from damage. Thanks to the elastic material, it fits perfectly...
Available
€3.99
*
NEW
High-quality protection kit for engine and engine housing, specially developed to protect sensitive components against impacts, stone chips and tough riding conditions. The kit offers additional mechanical protection for the crankcase,...
Almost gone
€57.99
*
NEW
With the original Yamaha cooling fan (radiator fan) , you will always have perfect cooling - reliable, robust and original from the manufacturer. This component is specially designed to keep the temperature balance of your engine stable...
Almost gone
€199.90
*
NEW
Locking bolt, Screw and seal, various Sizes
The oil drain plug is a small but important spare part - it ensures that your engine oil remains safely in the engine housing and can be drained cleanly when changing the oil. If the thread is damaged or the old screw is twisted, this...
Out of Stock
€4.99
*
NEW
Manual choke cable Motoforce, PWK / CP / Flat Slide carburetor, red
The manual choke for PWK and Polini CP carburetors gives you full control over the cold start of your scooter or moped. Instead of relying on an automatic choke, you can now adjust the fuel/air mixture manually. This ensures reliable...
Out of Stock
€6.90
*
NEW
Retaining rubber radiator, 19x9,7x3x8, various colors Colors
Whether your radiator rattles or simply no longer sits properly - you can quickly remedy the situation with the right retaining rubber. This fastening element made of high-quality silicone is specially designed and ensures a secure,...
Available
€3.99
*
NEW
Retaining rubber radiator, 24,5x12,5x14x3mm, various colors Colors
If the radiator wobbles, rattles or is no longer secure, it's time for a fresh hold. This retaining rubber is exactly the right spare part for many models - and ensures that your radiator is securely mounted again without vibration. The...
Available
€4.99
*
NEW
This is an original spare part from the Yamaha brand OEM part number: 1S7E24500100
Almost gone
€27.95
*
NEW
ECU control unit Top Performances, Yamaha YZF-R, WR, MT 125 / TFI central ignition
Get the most out of your 183cc Top Performances cylinder kit - with the right control unit! This ECU module is precisely matched to the 63 mm cylinder and ensures that your engine runs cleanly, pulls away perfectly and gets the full...
Almost gone
€299.90
*
NEW
Water pump oil seal, Yamaha/Minarelli YI 3-Motoren, 10x31x13.5
Oil seal FLJ7 10x31x13,5 -2Y for the water pump suitable for 125cc 4T YI-3 OHC engine. OEM number for comparison purposes: 93102-08004-00
Almost gone
€20.99
*
This item is an original spare part (OEM) from Yamaha OEM part number for comparison purposes : 1B9E21590000 Scope of delivery: 1
Available
€3.99
*
This item is an original spare part from the Yamaha brand. OEM number for comparison purposes: 9028003X0000
Out of Stock
€1.99
*
Fuel hose / petrol hose, 1m, neoprene, rubber compound, various diameters
Fuel hose / Petrol hose In the following variants: 6mm 7mm 8mm Length : 1m
Available
From €14.99
*
The JMP radiator is a high-quality alternative to the original part and offers improved cooling performance for Yamaha WR 125 R and WR 125 X models from 2011 to 2017. Features & benefits Optimum cooling performance Thanks to special fin...
Almost gone
€159.90
*
Fuel filter, 7mm, various colors
The aluminum elements of this fuel filter are available in different colors. This allows the filter and hoses to be visually matched. The connection width of the filter is 7 mm. The fuel hoses we offer are therefore a perfect fit.
Available
€9.99
*
Adapter für Temperatursensor Stage6 Adapter mit 22mm/18mm/16mm Außendurchmesser, zur einfachen Installation eines Temperaturgebers, z.B. von Stage6 oder Koso, in den Kühlkreislauf. Praktische Lösung, wenn das vorhandene Thermometer...
Available
€22.00
*
The VOCA Bestia CNC Flow Cooler is a high-quality flow cooler that has been specially developed for powerful 2-stroke engines. It optimizes cooling performance and ensures effective temperature control, especially for tuned or heavily...
Available
€25.95
*
This item is an original spare part (OEM) from Yamaha OEM part number for comparison purposes : 931022036600 Scope of delivery: 1
Available
€9.99
*
This item is an original spare part (OEM) from the Yamaha/Minarelli brand. We have created a set consisting of the following individual parts: 1x 903403282300 - Large screw 1x 932103281300 - Gasket large 1x 903401482400 - small screw 1x...
Almost gone
€20.95
*
The "T-Link" cooling pipe adapter is available for 16, 18 or 22 mm cooling pipes. The thermostat cooling tube adapter is the ideal connector for reading the cooling water temperature with VOCA or KOSO temperature gauges. The adapter can...
Almost gone
€24.95
*
This article is an original spare part (OEM) from Yamaha OEM part number for comparison purposes : 1S7E46130000 Scope of delivery: 1
Available
€4.99
*
Viewed