1. Choose model
MT 125 (ab 2025, Euro5+)
MT 125 (2021 bis 2024, RE40 - Euro5)
MT 125 (2020 bis 2020, RE39 - Euro4)
MT 125 (2017 bis 2019, RE29 - Euro4)
MT-125 (2014 bis 2016, RE11 - Euro3)
No results were found for the filter!
This compact flow-through cooler is the perfect addition for water-cooled engines where every degree counts. It is installed directly in the cooling circuit and provides additional heat dissipation - particularly useful for tuned setups...
Available
€16.95
*
This compact flow-through cooler is the perfect addition for water-cooled engines where every degree counts. It is installed directly in the cooling circuit and provides additional heat dissipation - particularly useful for tuned setups...
Available
€16.95
*
For a more aggressive look for your Yamaha MT 125, we offer you a radiator grille in various colors. Features no fairing parts need to be modified is attached to the original points perfect fit easy installation
Available
€49.95
*
The regulation of a suitable engine operating temperature is controlled by the cooling water thermostat. If the engine becomes too hot, the thermostat directs cooling water to the radiator. If the temperature is too low, it closes the...
Available
€39.95
*
Overheated engines often have a defective water pump, as a cause to complain. We can offer here a complete, pre-assembled replacement pump - simple plug & play. This article is a cheap alternative to the expensive original spare part....
Available
€119.95
*
;
€89.95
*
The regulation of a suitable engine operating temperature is controlled by the cooling water thermostat. If the engine becomes too hot, the thermostat directs cooling water to the radiator. If the temperature is too low, it closes the...
Available
€34.95
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.
Available
€1.29
*
Cooling hoses with internal spiral for reinforcement. In contrast to the conventional black hoses, you can use the transparent cooling hoses to determine exactly whether there is still air in the cooling circuit to exclude possible...
Available
€14.99
*
;
From €9.99
*
NEW
Haltegummi Kühler, Außendurchmesser 23,5 mm x Innendurchmesser 11mm x Höhe 10 mm
Diese Gummibuchse für den Kühlerhalter dient zur sicheren und vibrationsarmen Lagerung des Kühlers. Sie dämpft Erschütterungen effektiv ab und schützt so den Kühler vor Beschädigungen. Durch das elastische Material sitzt sie passgenau...
Available
€3.99
*
NEW
Mit dem originalen Yamaha Kühlgebläse (Radiator Fan) behältst du stets perfekte Kühlung – zuverlässig, robust und original vom Hersteller. Dieses Bauteil ist speziell dafür ausgelegt, den Temperaturhaushalt deines Motors auch bei hohen...
Out of Stock
€199.90
*
NEW
Locking bolt, Screw and seal, various Sizes
The oil drain plug is a small but important spare part - it ensures that your engine oil remains safely in the engine housing and can be drained cleanly when changing the oil. If the thread is damaged or the old screw is twisted, this...
Out of Stock
€4.99
*
NEW
Retaining rubber radiator, 19x9,7x3x8, various colors Colors
Whether your radiator rattles or simply no longer sits properly - you can quickly remedy the situation with the right retaining rubber. This fastening element made of high-quality silicone is specially designed and ensures a secure,...
Available
€3.99
*
NEW
Retaining rubber radiator, 24,5x12,5x14x3mm, various colors Colors
If the radiator wobbles, rattles or is no longer secure, it's time for a fresh hold. This retaining rubber is exactly the right spare part for many models - and ensures that your radiator is securely mounted again without vibration. The...
Available
€4.99
*
Adapter für Temperatursensor Stage6 Adapter mit 22mm/18mm/16mm Außendurchmesser, zur einfachen Installation eines Temperaturgebers, z.B. von Stage6 oder Koso, in den Kühlkreislauf. Praktische Lösung, wenn das vorhandene Thermometer...
Available
€22.00
*
The VOCA Bestia CNC Flow Cooler is a high-quality flow cooler that has been specially developed for powerful 2-stroke engines. It optimizes cooling performance and ensures effective temperature control, especially for tuned or heavily...
Available
€25.95
*
The "T-Link" cooling pipe adapter is available for 16, 18 or 22 mm cooling pipes. The thermostat cooling tube adapter is the ideal connector for reading the cooling water temperature with VOCA or KOSO temperature gauges. The adapter can...
Almost gone
€24.95
*
This item is an original spare part (OEM) from Yamaha OEM part number for comparison purposes : B7DF1557MAST Scope of delivery: 1
Almost gone
€99.95
*
This article is an original spare part (OEM) from Yamaha OEM part number for comparison purposes : 5P0E25900000 Scope of delivery: 1
Almost gone
€27.95
*
This article is an original spare part (OEM) from Yamaha OEM part number for comparison purposes : 5STE24620000 Scope of delivery: 1
Almost gone
€52.95
*
This article is an original spare part from Yamaha OEM part number for comparison purposes : 9043006X0000 Scope of delivery: 1
Available
€1.36
*
This article is an original spare part (OEM) from Yamaha OEM part number for comparison purposes : 5D7E24670200 Scope of delivery: 1
Available
€40.49
*
This article is an original spare part (OEM) from Yamaha OEM part number for comparison purposes : 5D7E24820000 Scope of delivery: 1
Almost gone
€16.39
*
This article is an original spare part (OEM) from Yamaha OEM part number for comparison purposes : 38BE24430000 Scope of delivery: 1
Available
€38.95
*
The cooling system of your Yamaha MT 125 has an important task. It ensures that your bike does not overheat even under overheating even under heavy load. For this to work, the cooling system must function correctly. function properly. In the event of strong vibrations, the filigree cooling fins of the radiator can crack and leak. leakage can occur. Then you can find a replacement Kühler für your motorcycle.
Even more common, however, is that it comes with älteren MT 125 to cracks in the Kühlwasserschlauch, or the the thermostat no longer works correctly. If it runs completely blöd, lässt you your cooling water cap somewhere. For all these problems on the cooling system of your MT 125, we have the suitable spare parts.
Viewed