Tip Use our  Bike-Filter to get only suitable articles displayed.
0 Article
 

Yamaha MT 125 Cooling system

1. Choose model
MT 125 (ab 2024, Euro5+)
MT 125 (2021 bis 2023, RE40 - Euro5)
MT 125 (2020 bis 2020, RE39 - Euro4)
MT 125 (2017 bis 2019, RE29 - Euro4)
MT-125 (2014 bis 2016, RE11 - Euro3)
Filter
Close filters
2 From 2
No results were found for the filter!
Clamps / hose clamps Clamps / hose clamps, 50 parts
Practical assortment box with different sizes of hose clamps. Should not be missing in any well-assorted workshop. Delivered are 10 clamps each in 6, 8, 10, 12 and 14mm diameter.

Out of Stock

€34.95 *
Hose clamp Hose clamp, universal, 8 x 300mm
Practical set for assembling hose clamps yourself. Consisting of 8 screw clips and a 30cm long steel band. The band can be torn off in the desired length, then only the clip is attached and the clamp is ready for use. Notes Cut the tape...

Available

€5.99 *
Hose clamp assortment Hose clamp assortment, 50 parts
Galvanized steel hose clamps with worm thread for attaching hoses to pipes and hose nozzles. Including 8mm socket wrench. Sizes: 12 x 13-19mm 12 x 16-22mm 10 x 18-27mm 7 x 20-32mm 5 x 22-38mm 3 x 24-44mm

Available

€27.95 *
Clamp Piaggio OEM
Clamp Piaggio OEM, Universal, D= 18mm
18mm hose clamp from Piaggio, can of course be used on all vehicles. OEM part number for comparison purposes 879888; 256074; 577557; AP8104072

Available

€4.99 *
Cover cooling water tank Yamaha
Cover cooling water tank Yamaha, MT 125 all year.
The cover of the cooling water tank of the MT is located deep down in the front spoiler. Unfortunately it gets lost very quickly even if it is not fixed properly. OEM part number for comparison purposes 5VK218750000

Almost gone

€15.90 *
Temperature sensor Koso 150° c black plug
Temperature sensor Koso 150° c black plug, universal, special sizes PT 1/8
Since the original temperature sensor cannot be used with Koso instruments, we offer you a universal alternative here. The temperature sensor from Koso is equipped with a conical PT 1/8 thread and fits on the most common cylinder heads....

Available

€13.99 *
2 From 2

The cooling system of your Yamaha MT 125 has an important task. It ensures that your bike does not overheat even under overheating even under heavy load. For this to work, the cooling system must function correctly. function properly. In the event of strong vibrations, the filigree cooling fins of the radiator can crack and leak. leakage can occur. Then you can find a replacement Kühler für your motorcycle.

Even more common, however, is that it comes with älteren MT 125 to cracks in the Kühlwasserschlauch, or the the thermostat no longer works correctly. If it runs completely blöd, lässt you your cooling water cap somewhere. For all these problems on the cooling system of your MT 125, we have the suitable spare parts.

Viewed