1. Choose model
CB 125 F (2017 bis 2018, JC74)
CB 125 F (2015 bis 2016, JC64)
No results were found for the filter!
Spare part for Arrow exhaust systems. Can also be used for exhaust systems of other manufacturers with the same diameter.
Available
€10.00
*
Replacement dB-Killer for different Arrow Thunder exhaust silencers. Please compare dimensions! Technical data length: 200mm diameter 1: 45mm diameter 2: 26mm Number of holes: 6 A single dB killer is delivered.
Available
€39.90
*
Available
€7.49
*
Heat protection film, multiple sizes
Self-adhesive heat protection films in various sizes and thicknesses. The film consists of a heat-resistant fibreglass fabric in combination with a thin, reflective aluminium foil and is indispensable for all plastic trim parts near the...
Available
From €5.99
*
Replacement graphite manifold gasket. Fits in principle all vehicles with straight flange or plug-in flange connections up to 42mm diameter. (42mm is for example the original size of the Yamaha YI-3 & YI-4 engine).
Available
€4.99
*
Copper seal ring. Technical data Inner diameter: 31.50 mm Outside diameter: 40.00 mm thickness: 4 .00 mm
Available
€5.95
*
Aluminium/steel manifold gasket from Athena. Can be used on all vehicles with the corresponding outlet dimension of 45mm diameter.
Available
€4.50
*
Exhaust heat protection tape, Grey, 50mm wide x 10m long
Heat protection tape is primarily used to protect against burns. But especially with 2-stroke exhaust systems it has even a performance-enhancing Effect. Because 2-stroke Exhaust systems are very sensitive to temperature fluctuations....
Available
€30.95
*
Outlet screw set, Cross/ 10 hexagon socket, M6 x 16mm (pair)
Exhaust bolt set for almost all common motorcycles. Can be mounted with a 10 mm wrench and a Phillips screwdriver. Dimensions: M6 x 16mm. Delivered are 2 pieces.
Available
€3.59
*
Available
€1.59
*
Graphite sealing ring from Athena. Can be used in many different vehicles as a seal for overlapping plug connections.
Available
€13.95
*
Available
€1.99
*
Manifold incl. catalytic converter for Honda CB 125 F. Required to mount Arrow exhaust muffler to the CB 125 F.
Almost gone
€315.00
*
Single Arrow full carbon rear silencer, suitable for Honda CB 125 F. No manifold, catalytic converter or similar is included with this ESD. It is therefore rather to be regarded as a spare part, since an assembly on the moped can only be...
Almost gone
€399.90
*
;
€219.90
*
Presto Exhaust Mounting Paste is a putty-like paste for sealing joints in the area of exhaust systems, such as sleeves, clamps, clamps, etc. Properties: putty-like paste on water glass basis For permanent sealing of exhaust parts Easy...
Available
€2.49
*
Presto Exhaust Mounting Paste is a putty-like paste for sealing joints in the area of exhaust systems, such as sleeves, clamps, clamps, etc. Properties: putty-like paste on water glass basis For permanent sealing of exhaust parts Easy...
Available
€5.29
*
Mounting rubber for exhaust systems, universal
Technical data Length pin/bolt: 53mm Diameter bolt: 8mm length rubber element: 19mm
Available
€6.49
*
Stud bolt, M6x27
Outlet stud with M6 thread on both sides. As a replacement for torn out or over-turned studs. The bolt is galvanized and has a total length of 27mm. A single bolt is supplied.
Available
€0.59
*
Exhaust stud & nuts set, M8 x M8 - 10 pieces
Again and again annoyance with torn or heavily rusted exhaust bolts? with this set from Motoflow this problem can now be solved. The set consists of 10 bolts with the dimension M8xM8 as well as the collar nuts.
Available
€12.99
*
Exhaust stud & nuts set, M6 x M6 - 2 pieces
Again and again annoying with torn or heavily rusted exhaust bolts? With this set this problem can now be solved. The set consists of 2 bolts with the dimension M6xM6 as well as the collar nuts.
Available
€2.99
*
If you want to legalise your Arrow Thunder for Honda CBR 100%, you have to resort to a retrofit catalytic converter. The catalytic converter is simply used instead of the intermediate pipe (51005KI) and thus provides sufficient exhaust...
Almost gone
€189.00
*
Stainless steel racing manifold from Arrow for Honda CBF 125 Bj. 09-17 The manifold is needed to mount the unit of catalytic converter rear silencer or intermediate pipe rear silencer on your vehicle. Note Catalyst: 51005KZ intermediate...
Almost gone
€119.00
*
;
€35.95
*
If you want to use your Arrow exhaust 100% legally, there is no way around this Arrow sports catalytic converter. The catalytic converter offers the best exhaust values with reduced backpressure of the exhaust gas. So there are no...
Available
€161.00
*
With the exhaust paint Motip you can give your exhaust a different colour and thus give your 125cc motorcycle a new look. The paint, for example in black matt, is primarily intended for painting exhaust systems. Of course you can also...
Available
€17.99
*
Viewed