Tip Use our  Bike-Filter to get only suitable articles displayed.

Fork & Shock absorber

Close filters
1 From 2
No results were found for the filter!
NEW
Triple clamp Yamaha OEM
Triple clamp Yamaha OEM, Yamaha YZF-R/MT 125 Bj. 14-22, unten
This item is an original spare part (OEM) of the brand Yamaha. OEM part number for comparison 5D7F33403000

Out of Stock

€299.90 *
Suspension strut YSS Mono
Suspension strut YSS Mono, KTM Duke 125 from year 17
With this shock absorber from YSS Racing Suspension, too, it's not a case of spilling the beans, but making a splash! On the KTM Duke 125 in particular, the standard shock absorber is an often-complained-about wearing part. If oil is...

Almost gone

€459.50 *
Strut Mono YSS Racing
Strut Mono YSS Racing, KTM Duke 125/390 Bj. 11-16, Adjustable, Height adjustable, with ABE
Also with this damper from YSS- Racing Suspension applies not spill, but chunky! Especially on the KTM Duke 125, the standard shock absorber is an often criticized wearing part. If oil is lost and the handling becomes spongy, the damper...

Almost gone

€869.90 *
Shock strut Mono YSS
Shock strut Mono YSS, Yamaha YZF-R 125 Bj. 08-16, einstellbar
Milled aluminium body, spring strut adjustable in spring preload and rebound (30 clicks). The spring preload is locked by means of a grub screw. The length of the shock is adjustable by +10mm. The adjustment tool is included in the...

Available

€299.90 *
Shock strut Mono YSS RACING
Shock strut Mono YSS RACING, KTM Duke 125/390 Bj. 11-16, adjustable
Milled aluminium body, spring strut adjustable in spring preload and rebound (30 clicks) The spring preload is locked by means of a grub screw. The length of the shock is adjustable by +10mm. The adjustment tool is included in the...

Almost gone

€399.50 *
Circlip Fork seal rings Circlip Fork seal rings, Yamaha YZF- R 125 up to year 13 (RE06)
For securing the fork seals of your Yamaha YZF-R 125. Made of stainless steel (SUS304WPB). Scope of delivery: 2 pcs.

Available

€5.99 *
Dust cap fork seal Kawasaki OEM
Dust cap fork seal Kawasaki OEM, Kawasaki Z 125 from year 18, Ninja 125 from year 19, fork sealing gasket
This item is an original spare part (OEM) of the brand Kawasaki. OEM part number for comparison purposes 920930590 Scope of delivery: 1 pc.

Almost gone

€18.99 *
Fork seal Kawasaki OEM
Fork seal Kawasaki OEM, Kawasaki Z 125 from year 18, Ninja 125 from year 19, fork sealing ring
This item is an original spare part (OEM) of the brand Kawasaki. OEM part number for comparison purposes 920490740 Scope of delivery: 1 piece!

Almost gone

€16.99 *
Fork seal & dust cap set Honda OEM
Fork seal & dust cap set Honda OEM, Honda CB 125 R from year 18
This set, consisting of a dust cap and a fork seal ring is an original spare part (OEM) from Honda. For the professional repair of the fork are of course 2 stck. Needed. OEM part number for comparison 51490MKAD81, 51490MERR61

Almost gone

€30.95 *
Fork seal set Athena
Fork seal set Athena, Yamaha YZF-R 125 Bj. 06-14 (RE06) 32x45x10mm
HQ- Fork seal ring set from the house of Athena. Athena is one of the leading manufacturers in the field of 2-wheel technology. Many vehicles are first equipped by Athena. Dimensions 32x45x10mm Scope of delivery Delivery in pairs

Available

€9.99 *
Fork seal rings Athena
Fork seal rings Athena, Aprilia RS4 125 from year 06-18, 40 x 52 x 10mm
Spongy riding behaviour or obvious oil loss at the fork are signs that it is time for a fork service. Athena sealing rings are of higher quality than OEM seals, or are even used as OEM seals by fork manufacturers. Athena sealing rings...

Available

€10.99 *
Sealing ring Honda OEM
Sealing ring Honda OEM, Honda CBF/CBR 125 (JC34A, JC39A, JC40A, JC50A, JC50B)
Upper dust protection sealing ring for the steering head bearing. OEM part number for comparison purposes: 53214-200-000; 53214200000

Almost gone

€5.95 *
Fork seal rings Athena
Fork seal rings Athena, 31 x 43 x 10,3mm
Athena, as one of the leading manufacturers of sealants, has the largest selection of Simmerring and dust cap sets in the world. These gaskets are used by some manufacturers as original equipment, or are of higher quality than the OEM...

Available

€9.49 *
Lowering kit
Lowering kit, Yamaha YZF-R / MT 125 year 14-18 (RE11, RE29), with ABE
With these levers the rear of the Yamaha MT, or YZF-R 125 can be lowered a few centimeters. This makes it easier for smaller riders to get on and off the bike. However, due to the installation of the lowering system, it is often not...

Out of Stock

€99.95 *
Lowering TRW
Lowering TRW, Yamaha WR 125, with ABE
These bell cranks allow the rear of the Yamaha WR to be lowered by a few centimetres. This makes it easier for smaller riders to get on and off the bike. However, due to the installation of the lowering system, it is often not possible...

Almost gone

€99.95 *
Forked seal ring set Athena
Forked seal ring set Athena, Yamaha WR 125, MT-07 (RM04), MT-09 (RN29)
Simmerring set Athena, these are of higher quality than the OEM seals and guarantee a remarkable performance and resistance to high temperatures and abrasion. outer rubber, double sealing lip Suitable for Showa forks with 41mm...

Available

€15.99 *
Rate of increase TRW
Rate of increase TRW, Kawasaki Z 125
This elevation kit offers larger riders an easy way to adopt a more comfortable seating position. But also normal sized riders can benefit from a heightening kit. As the rear end is raised, the geometry of the chassis changes. Many...

Almost gone

€102.90 *
Shock absorber Mono YSS
Shock absorber Mono YSS, Honda CBR 125 (JC34A, JC39 A/B, JC50 A/B), adjustable
Milled aluminium body, spring strut adjustable in spring preload via fine thread. Locking by means of set screw. Adjustment tool included in delivery.

Out of Stock

€199.90 *
Shock absorber Mono YSS
Shock absorber Mono YSS, Aprilia RS 125 until 2005
Aprilia RS125 2-stroke models have, apart from the often criticized Lifetime the cylinder / piston Combination another great Problem which concerns the original Sachs rear shock absorber. Especially with increasing age this shock...

Available

€164.90 *
Dust caps fork JMP
Dust caps fork JMP, Beta RR 125 year 14-, KTM SX / EXC 125 / Duke 690 from year 08
Dust caps protect the fork seals from dust and coarse dirt, which extends the service life of the fork seals accordingly. Technical data 48x58.5x6/11.5

Almost gone

€20.95 *
Dust caps fork Dust caps fork, Yamaha WR 125, MT07 (RM04), 41x53.5x12mm
Dust caps protect the fork seals from dust and coarse dirt, which extends the service life of the fork seals accordingly.

Available

€15.95 *
Steering head bearing set Steering head bearing set, Yamaha MT, YZF-R 125 up to year 2018
The steering head bearing is thoroughly checked during the technical inspection of the vehicle. If it is worn out or slightly jammed, the motorcycle will not get a new sticker. The only remedy is to replace the bearing.

Out of Stock

€48.95 *
Fork seal rings ARI
Fork seal rings ARI, Yamaha MT/YZF 125 year 11-18, 41x53x8/10.5mm
Quality radial shaft seals from ARI, suitable for Yamaha MT & YZF-R 125. One set is delivered. Dimensions: 41x53x8/10.5

Available

€9.99 *
Fork seal rings Athena
Fork seal rings Athena, KTM Duke / RC 125 up to model year 16, 43x52.9x9/11,4mm
Quality radial shaft seals from Athena, suitable for KTM Duke 125, 200 and 390 models, as well as KTM RC 125, 200 & 390 up to model year 2017. One set is delivered. Dimensions: 43x52.9x9/11.4 mm

Available

€14.99 *
1 From 2
Viewed