No results were found for the filter!
Made for the Shark Factory exhausts on KTM models, this exhaust clamp also fits other mounts with a round diameter of 90mm
Out of Stock
€59.95
*
Here is a replacement bracket for exhausts of the model range Ipersport from Giannelli.
Almost gone
€33.99
*
;
€19.99
*
Rubber bearing exhaust mounting Watts, Universal, various colours
Colored rubber bearing for mounting the exhaust. It counteracts the expansion and contraction of the metal caused by heat development and thus prevents cracks in the frame or exhaust itself.
Available
€9.99
*
Spare part for Arrow exhaust systems.
Available
€9.99
*
Arrow replacement seal. Can be used not only with Arrow, but also with all other exhaust systems with 32mm diameter and plug-in flange. Technical data Diameter (inside): 32mm width: 30mm
Available
€10.00
*
Spare part for Arrow exhaust systems. Can also be used for exhaust systems of other manufacturers with the same diameter.
Available
€10.00
*
Replacement dB-Killer for different Arrow Thunder exhaust silencers. Please compare dimensions! Technical data length: 200mm diameter 1: 45mm diameter 2: 26mm Number of holes: 6 A single dB killer is delivered.
Available
€39.90
*
Available
€7.49
*
Heat protection film, multiple sizes
Self-adhesive heat protection films in various sizes and thicknesses. The film consists of a heat-resistant fibreglass fabric in combination with a thin, reflective aluminium foil and is indispensable for all plastic trim parts near the...
Available
From €5.99
*
Replacement graphite manifold gasket. Fits in principle all vehicles with straight flange or plug-in flange connections up to 42mm diameter. (42mm is for example the original size of the Yamaha YI-3 & YI-4 engine).
Available
€4.99
*
Copper seal ring. Technical data Inner diameter: 31.50 mm Outside diameter: 40.00 mm thickness: 4 .00 mm
Available
€5.95
*
Aluminium/steel manifold gasket from Athena. Can be used on all vehicles with the corresponding outlet dimension of 45mm diameter.
Available
€4.50
*
Exhaust heat protection tape, Grey, 50mm wide x 10m long
Heat protection tape is primarily used to protect against burns. But especially with 2-stroke exhaust systems it has even a performance-enhancing Effect. Because 2-stroke Exhaust systems are very sensitive to temperature fluctuations....
Available
€30.95
*
Outlet screw set, Cross/ 10 hexagon socket, M6 x 16mm (pair)
Exhaust bolt set for almost all common motorcycles. Can be mounted with a 10 mm wrench and a Phillips screwdriver. Dimensions: M6 x 16mm. Delivered are 2 pieces.
Available
€3.59
*
Available
€1.59
*
Graphite sealing ring from Athena. Can be used in many different vehicles as a seal for overlapping plug connections.
Available
€13.95
*
Available
€1.99
*
As a spare part, or for tuners who want to build their own manifold to increase the performance of the engine, we offer here, in addition to the complete set, the rear silencer of the Arrow X-Cone in the black version with carbon cap...
Almost gone
€391.00
*
;
€293.90
*
Single version of the Honda CB 125 R rear silencer. Arrow uses in this version a black aluminium cover and a simple stainless steel end cap. A separately available manifold is required for mounting. We also offer the exhaust here in the...
Almost gone
€299.90
*
;
€224.90
*
It can always happen, even with stable carbon, that something gets broken, scratched, or even breaks. For those who cannot or do not want to live with this, we offer a "halfway" moderate solution for replacement. Even if the rear...
Almost gone
€442.00
*
;
€309.90
*
Elbow pipe from Arrow incl. slide-in catalytic converter. Of course all components are made of stainless steel. So the exhaust is still presentable even after a long time. Due to the included catalyst everything is also legally in order....
Almost gone
€329.00
*
Presto Exhaust Mounting Paste is a putty-like paste for sealing joints in the area of exhaust systems, such as sleeves, clamps, clamps, etc. Properties: putty-like paste on water glass basis For permanent sealing of exhaust parts Easy...
Available
€2.49
*
Presto Exhaust Mounting Paste is a putty-like paste for sealing joints in the area of exhaust systems, such as sleeves, clamps, clamps, etc. Properties: putty-like paste on water glass basis For permanent sealing of exhaust parts Easy...
Available
€5.29
*
Mounting rubber for exhaust systems, universal
Technical data Length pin/bolt: 53mm Diameter bolt: 8mm length rubber element: 19mm
Available
€6.49
*
Viewed