1. Choose model
WR 125 X/R (2013 bis 2017, DE072 - Euro3)
WR 125 X/R (2009 bis 2013, DE071 - Euro3)
No results were found for the filter!
Rubber bearing exhaust mounting Watts, Universal, various colours
Colored rubber bearing for mounting the exhaust. It counteracts the expansion and contraction of the metal caused by heat development and thus prevents cracks in the frame or exhaust itself.
Almost gone
€9.99
*
Spare part for Arrow exhaust systems.
Available
€9.99
*
Arrow replacement seal. Can be used not only with Arrow, but also with all other exhaust systems with 32mm diameter and plug-in flange. Technical data Diameter (inside): 32mm width: 30mm
Available
€10.00
*
Spare part for Arrow exhaust systems. Can also be used for exhaust systems of other manufacturers with the same diameter.
Available
€10.00
*
Replacement dB-Killer for different Arrow Thunder exhaust silencers. Please compare dimensions! Technical data length: 200mm diameter 1: 45mm diameter 2: 26mm Number of holes: 6 A single dB killer is delivered.
Available
€39.90
*
Carbon heat protection from Arrow. Suitable spare part for Yamaha WR 125 exhausts.
Out of Stock
€55.00
*
Protective rubber, for mounting under the exhaust clamp. Protects your silencer from unsightly scratches. (For Arrow Thunder silencer). Suitable f. Silencer: 51513 (AK/AKN/AO/AON/PK/PO) - Yamaha MT 125 51503 (AK/AKN/AO/AON/PK/PO) -...
Available
€14.95
*
Replacement exhaust clamp for Arrow Thunder silencer. Suitable f. Silencer: 51513 (AK/AKN/AO/AON/PK/PO) - Yamaha MT 125 51503 (AK/AKN/AO/AON/PK/PO) - Yamaha YZF-R 125 52505 (AK/AKN/AO/AON/PK) - Yamaha WR 125
Available
€25.00
*
Small spare part for Arrow Thunder exhaust systems. This washer is mounted to the exhaust clamp to be able to fix it evenly. Arrow OEM Part Number 5480004 Suitable for Arrow "51513 - Thunder" exhaust silencer
Available
€3.99
*
Replacement dB-Killer insert for Arrow Thunder exhaust systems. Suitable for Yamaha WR 125.
Available
€50.00
*
Replacement dB-Killer for different LeoVince LV One exhaust silencers.
Out of Stock
€45.95
*
Available
€7.49
*
Heat protection film, multiple sizes
Self-adhesive heat protection films in various sizes and thicknesses. The film consists of a heat-resistant fibreglass fabric in combination with a thin, reflective aluminium foil and is indispensable for all plastic trim parts near the...
Available
From €5.99
*
Replacement graphite manifold gasket. Fits in principle all vehicles with straight flange or plug-in flange connections up to 42mm diameter. (42mm is for example the original size of the Yamaha YI-3 & YI-4 engine).
Available
€4.99
*
Copper seal ring. Technical data Inner diameter: 31.50 mm Outside diameter: 40.00 mm thickness: 4 .00 mm
Available
€5.95
*
Aluminium/steel manifold gasket from Athena. Can be used on all vehicles with the corresponding outlet dimension of 45mm diameter.
Available
€4.50
*
Exhaust heat protection tape, Grey, 50mm wide x 10m long
Heat protection tape is primarily used to protect against burns. But especially with 2-stroke exhaust systems it has even a performance-enhancing Effect. Because 2-stroke Exhaust systems are very sensitive to temperature fluctuations....
Available
€30.95
*
Outlet screw set, Cross/ 10 hexagon socket, M6 x 16mm (pair)
Exhaust bolt set for almost all common motorcycles. Can be mounted with a 10 mm wrench and a Phillips screwdriver. Dimensions: M6 x 16mm. Delivered are 2 pieces.
Available
€3.59
*
Available
€1.59
*
Graphite sealing ring from Athena. Can be used in many different vehicles as a seal for overlapping plug connections.
Available
€13.95
*
Available
€1.99
*
To mount an Arrow exhaust system on your Yamaha MT 125 you need a suitable manifold. The manifold offered here has a built-in catalytic converter, which makes the exhaust system completely roadworthy and allows you to pass the exhaust...
Available
€313.00
*
Presto Exhaust Mounting Paste is a putty-like paste for sealing joints in the area of exhaust systems, such as sleeves, clamps, clamps, etc. Properties: putty-like paste on water glass basis For permanent sealing of exhaust parts Easy...
Available
€2.49
*
Presto Exhaust Mounting Paste is a putty-like paste for sealing joints in the area of exhaust systems, such as sleeves, clamps, clamps, etc. Properties: putty-like paste on water glass basis For permanent sealing of exhaust parts Easy...
Available
€5.29
*
Viewed