Tip Use our  Bike-Filter to get only suitable articles displayed.
0 Article
 

Husqvarna SMR 125 Cylinder

1. Choose model
SMR 125 (2011 bis 2013, A500AB)
2. Filter by category
Filter
Close filters
2 From 2
No results were found for the filter!
Rocker arm set Rocker arm set, Yamaha / Minarelli YI 4-Takt Motoren
The rocker arms operate the valves in the 4-stroke cylinder head. Since the part actuated by the camshaft is mounted is mounted on ball bearings it is mechanical exposed to mechanical wear. These rocker arms are the perfect & cheap...

Available

€39.90 *
Cylinder kit Naraku 200cc Ceramic
Cylinder kit Naraku 200cc Ceramic, Yamaha YI 4-stroke engine, (YZF-R, MT, WR 125 / Beta RR / etc.)
Naraku 200cc Big-Bore ceramic cylinder kit with 66mm bore and hard chrome plating, suitable for Yamaha WR, YZF-R, MT and many other 125cc with Yamaha YI engine. Supplied as shown with all seals and small parts necessary for assembly. The...

Available

€229.90 *
Nockenwelle Original Replica Nockenwelle Original Replica, Yamaha YI-3/4 Motor
Poorly maintained Yamaha YI engines often have problems with a run-in camshaft. This is especially noticeable in the loss of power that occurs. Also the readjustment of the valves brings then nothing more, because the chrome layer of the...

Available

€49.90 *
Timing chain tensioner seal Yamaha OEM
Timing chain tensioner seal Yamaha OEM, Yamaha YI-3 engine from year 14 up (YZF-R/ MT 125, RE11/29, Beta RR)
If the timing chain tensioner is replaced, it may be necessary to renew its seal as well. Here we offer this spare part original from Yamaha. OEM part number for comparison purposes 1DYE22130000

Available

€4.24 *
Cylinder kit Naraku 177cc
Cylinder kit Naraku 177cc, Yamaha YI-3
Compared to the 150cc cylinder kit from Naraku, the 177cc cylinder has of course been given an even larger bore which in turn can further optimise the performance of the engine. Since in cubic classes from 160cc on the original ECU...

Available

€219.90 *
Cylinder head Naraku 62mm
Cylinder head Naraku 62mm, Yamaha YI-3
To get the absolute maximum power out of Yamaha's YI-3 engines, this 62mm Ø Naraku cylinder head is indispensable. More passage, reinforced valve springs and larger valves (21/23mm) let every cylinder with 62-64mm bore breathe properly....

Available

€429.90 *
Cylinder kit Airsal T6 Racing 125cc
Cylinder kit Airsal T6 Racing 125cc, Yamaha YI-3 Engine
In addition to the 125cc standard cylinder kit, Airsal also offers a T6 racing version. The main difference of the T6 compared to the 125cc standard cylinder is the improved piston, which significantly changes the combustion chamber...

Available

€144.90 *
Gasket set Top Performances 180cc
Gasket set Top Performances 180cc, Yamaha YI-3 engines up to year 13 (YZF-R 125 RE06), suitable for Top Performances...
Replacement gaskets for the 180cc 4-stroke cylinder from Top Performances.

Available

€22.95 *
Cylinder kit Airsal 125cc aluminium
Cylinder kit Airsal 125cc aluminium, Yamaha YI-3 engine (Yamaha YZF/WR 125)
The Airsal YI-3 cylinder for the Yamaha 125cc engines is supposed to be a cheap alternative to the expensive original cylinder. Airsal not only uses a copy of the original cylinder, but also improves the coating, the piston and the...

Available

€137.90 *
Piston ring set Airsal 125cc Alu
Piston ring set Airsal 125cc Alu, Yamaha YI-3 Engine
Spare rings for the Yamaha YI-3 OHC engine. (Yamaha YZF R125, WR 125, etc..)

Available

€17.99 *
Gasket set Airsal 125cc Alu
Gasket set Airsal 125cc Alu, Yamaha YI-3 OHC engine
Replacement gaskets for the 125cc Yamaha YZF and WR engine.

Available

€17.99 *
Piston Airsal 125cc Alu
Piston Airsal 125cc Alu, YI-3 OHC
Replacement pistons in original Airsal dimensions, suitable for the Yamaha YZF R-125 or Yamaha WR 125 engine. Delivery includes piston rings, piston pin clips and piston pins.

Available

€39.95 *
2 From 2

The cylinder is the heart of your Husqvarna SMR 125. This is where all the power at your disposal comes from. In modern engines are built to be very robust and durable. Nevertheless it can happen that a part of your cylinder breaks and you need a spare part. This is the case, for example, with the engine gasket from time to time. In this case, you should also carry out a repair on your SMR 125, because a defective cylinder not only cylinder not only costs you performance on the road, but in the worst case it can also lead to a major more serious (and more expensive) damage to other areas of the engine.

In addition to replacement pistons, you can also find replicas of the original 125cc cylinders. So you can get the "factory condition" of your Husqvarna SMR 125 at any time.

Darüberhinaus we offer some tuning packs and tuning cylinders. Here there are different sizesößen between 125cc to 183cc displacement. So you increase the performance of your SMR 125 für the race track.

.

Viewed