1. Choose model
RS 125 (ab 2025, XTA (Euro5+))
RS 125 (2021 bis 2024, XA- Euro5)
RS 125 (2017 bis 2020, KC - Euro4)
RS4 125 (2011 bis 2017, TW - Euro3)
RS 125 (2006 bis 2013, RM/RD)
RS 125 (1995 bis 2005, MP/SF)
No results were found for the filter!
Stand mounts, so-called "Diablos", are used to be able to use motorcycle paddock stands with claw mounts. The stand mounts are 2-piece black and color anodized. Provided with 10mm mounting screw. Scope of delivery 2 pieces (pair) incl....
Available
From €12.90
*
An aluminum CNC machined brake fluid reservoir cap that fits your Duke like a glove. In a Duke-like orange, it's a stylistically fitting lid for the brake fluid reservoir.
Available
€12.99
*
Herewith you get a color matching your bike brake fluid reservoir with CNC cap. The attachment takes place directly on the tank. The cap comes incl. seal, clamps and hose. In addition, the tank (∅42mm) has the typical level indicators...
Available
€9.99
*
With the lever protectors of Motoflow you effectively protect your levers and or hand from bending such as in a fall. The protectors are available in 2 different colors.
Available
€29.95
*
Tire valve caps from Radical Racing with a sporty and modern design.
Available
€5.49
*
Noble anodized short stroke throttle grip from Radical. Completely made of aluminium with a transparent plastic cover that allows a view of the pulley. The twist grip itself is ribbed for improved grip of the rubber grip. Universal fits...
Available
€39.95
*
Simple handlebar grip rubbers with optional red or black anodized sleeves on the front and rear part of the handle. The rubbers are medium soft and thus universally applicable. The assembly is quite Simpel. The indicated handlebar ends...
Available
€20.95
*
;
€15.95
*
Matching the various other engine styling parts from Radical Racing, herewith also comes a fully enclosing rear brake cylinder guard. incl. mounting material
Available
From €14.99
*
Aluminum fairing screws from Motoflow, in colored anodized finish. The screws are provided with wide lens head and a hexagon socket. So the fairing holds securely in place. Since it is aluminum, these screws are not suitable for high...
Available
€3.99
*
Brake & clutch lever guards are used on racing motorcycles similar to handguards on motocross bikes. However, they are intended less to protect the hands from mud and debris and more to protect the levers from a fall. That way, if the...
Available
€29.99
*
Small, but fine detail that calls for change. With this anodized release lever you can remove the old disdainful release lever and set a chic colored accent on the engine. Absolutely high-quality product made of CNC-milled aluminum.
Available
From €15.95
*
With lever sets it is particularly important with the brake lever that these parts function properly. Also the many cheap copies without ABE fulfill idr. exactly this purpose. The TÜV and a police control sees this a little...
Available
€104.90
*
;
From €74.95
*
125cc levers with ABE are the exception on the market. The often much cheaper products from Asia are of course not allowed on the vehicle. We can now offer a "V2" - Premium version, with ABE! Of course, we have through the certification...
Available
€104.90
*
We offer a complete set consisting of adjustable brake lever and clutch lever armature. Also included is a master cylinder for hydraulic brakes. The individual parts of the set are mostly CNC milled and have an extremely attractive...
Available
€99.90
*
;
€69.90
*
CNC machined brake fluid reservoir from Motoflow. Available in different colors.
Available
€19.95
*
;
From €15.00
*
Stand mounts are used to use motorcycle paddock stands with claw mounts. The stand holders are 2-part black and orange anodized.
Available
€12.90
*
Simple CNC milled styling part for KTM Duke or RC 125, the screw is located at the top of the clutch housing. Great optical effect for a small budget!
Available
€13.99
*
Cheap part that will attract a lot of attention. This screw cap is suitable for the rear brake fluid reservoir of the KTM Duke 125, or the front reservoir of the Aprilia RS 125 and can be fitted in less than a minute. Note: The seal of...
Available
€18.95
*
;
From €9.99
*
The most visually dangerous valve caps you can buy. The new valve caps, in the design of a hand grenade, are a real eye-catcher. Available in different colours. Scope of supply: 1 pair.
Available
€3.09
*
NEW
Die Spiegel Gewinde Abdeckschrauben M10 x 1,25 dienen zur sauberen und sicheren Abdeckung der originalen Spiegelgewinde am Lenker, insbesondere bei der Verwendung von Lenkerendenspiegeln. Gefertigt aus hochwertigem CNC-gefrästem...
Available
€10.99
*
NEW
Die Raximo Ventilkappen aus Aluminium sind eine einfache Möglichkeit, die Optik deiner Räder aufzuwerten, ohne in die Technik einzugreifen. Sie werden direkt auf das Ventil geschraubt und ersetzen die serienmäßigen Kunststoffkappen. Dank...
Available
€6.99
*
NEW
Adjustment screw for clutch cable, Various colors, 30 mm, M10, CNC aluminum
The CNC-milled aluminum clutch adjustment screw allows you to adjust your clutch cable quickly and precisely. The large adjustment wheel allows you to adjust the clutch play cleanly and in a controlled manner – even on the road without...
Available
€7.99
*
NEW
License plate light Sixty6, Universal items, various colors, with E number, CNC aluminum
The LED mini license plate light from SIXTY6 is a particularly compact solution for a clean rear end. Made from CNC-milled aluminum , it impresses with its precise workmanship and minimalist design. Despite its extremely small...
Available
€34.95
*
NEW
This footrest extension for FRS and FRS2 footrests gives you more freedom in your seating position – without any DIY solutions. The CNC-milled multi-angle positioner allows you to move the footrest 25 mm in all directions . This allows...
Almost gone
€29.95
*
With CNC parts you have the opportunity to create with minimal effort an individual look to your Aprilia RS/RS4 125 to create. Parts like, Öleinfüllschrauben, brake cylinder cover, chain protector or even sprocket cover & motorcycle covers from CNC are mounted or replaced in a few minutes. Even more the parts, compared with a tuning exhaust system or a größeren cubic kit, significantly cheaper.
Apart from the erwähnten points CNC optics parts offer a much higher quality appearance than the Standard parts of the RS/RS4 125. We ourselves offer our own parts from Radical Racing only after strict quality control. quality control. So in addition to fit and visual impact, we also check function! For example the brake cylinder covers have a hole to prevent a vacuum in the reservoir, just like the original cover. can arise.
In addition, there are also a variety of different colors, so you also the right CNC parts matching the color of your motorcycle have.
Viewed