1. Choose model
RS 125 (ab 2025, XTA (Euro5+))
RS 125 (2021 bis 2024, XA- Euro5)
RS 125 (2017 bis 2020, KC - Euro4)
RS4 125 (2011 bis 2017, TW - Euro3)
RS 125 (2006 bis 2013, RM/RD)
RS 125 (1995 bis 2005, MP/SF)
2. Filter by category
No results were found for the filter!
With lever sets it is particularly important with the brake lever that these parts function properly. Also the many cheap copies without ABE fulfill idr. exactly this purpose. The TÜV and a police control sees this a little...
Available
From €56.95
*
We offer a complete set consisting of adjustable brake lever and clutch lever armature. Also included is a master cylinder for hydraulic brakes. The individual parts of the set are mostly CNC milled and have an extremely attractive...
Available
€99.90
*
;
€69.90
*
Simple Supersport grip rubbers in medium-strength compound. Are suitable for virtually any moped and any purpose. No special features, no Schi-Schi, but an unbeatable price.
Available
€11.99
*
;
€7.99
*
CNC machined brake fluid reservoir from Motoflow. Available in different colors.
Available
€19.95
*
;
From €15.00
*
Faulty braking effect is life-threatening and often due to a leaking brake pump. Repair is not always sensible or possible. In many cases there is no way around replacement. With this we offer an inexpensive universal part. Colour:...
Available
€32.95
*
Cheap alternative to expensive original brake pads, but still high quality! This set of brake pads is suitable for everyday use, especially the longevity and solid brake performance characterize them. Technical data Dimensions: 85x42,5mm...
Available
€19.99
*
;
€12.95
*
Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm
Available
€1.99
*
During maintenance work on the brake system, these small parts are often lost. The bleeder nipple can then become clogged and maintenance of the brake system becomes impossible the next time. A cover should therefore always be installed!
Available
€2.99
*
OEM part number for comparison purposes: AP8114331 Technical data Total length train (A): 885mm Length of cover total (B): 810mm Thread length (C): 10mm Thread: M8 Angularity: 90°
Available
€10.99
*
Almost universally applicable adjusting screw for clutch cables. Thread: M6 Inner diameter: 8,5 mm
Available
€2.49
*
Clutch and throttle cables are subject to high levels of wear due to daily movement. An inadequately maintained cable can break quickly and, above all, suddenly. The clutch and throttle can then no longer be operated. We offer...
Available
€13.99
*
Universally applicable clutch cable. Delivery includes universally usable clamps. Without cable sheathing.
Available
€4.49
*
⚠️Aufgrund Due to the large number of different rims used, it is not always possible to assign brake discs, as well as sprockets, without any doubt. We therefore ask you to compare the technical data specified in the item description...
Available
€19.99
*
;
€19.95
*
Universal hand brake cylinder for the front disc brake. The complete fitting is delivered including brake lever and is equipped with a brake light switch. The brake cylinder is ideal for handlebar conversions and/or as an alternative...
Available
€22.95
*
Cheap part that will attract a lot of attention. This screw cap is suitable for the rear brake fluid reservoir of the KTM Duke 125, or the front reservoir of the Aprilia RS 125 and can be fitted in less than a minute. Note: The seal of...
Available
€18.95
*
;
From €8.99
*
Short-stroke throttle handles offer the possibility to reduce the angle of the pull to be pulled and thus the total travel. Particularly with larger carburettors from 19 mm upwards, the turning movement is significantly reduced and thus...
Available
€28.95
*
The universal repair set for the throttle cable and/or shift cable consists of two new cables with 2.5m length and various connections for cable attachment.
Available
€12.99
*
;
€8.79
*
NEW
Die EBC VEE Scooter Bremsscheibe VR956 wurde speziell für Roller entwickelt und bietet eine zuverlässige sowie präzise Bremsleistung im Alltag. Durch die hochwertige Verarbeitung und das optimierte Design sorgt die Bremsscheibe für ein...
Almost gone
€69.95
*
NEW
Bei diesem Artikel handelt es sich um ein Originalersatzteil (OEM) der Firma Aprilia OEM Artikelnummer zu Vergleichszwecken : 2B008109 Lieferumfang: 1
Out of Stock
€195.90
*
NEW
Bei diesem Artikel handelt es sich um ein Originalersatzteil (OEM) der Firma Aprilia OEM Artikelnummer zu Vergleichszwecken : 2B008196 Lieferumfang: 1
Out of Stock
€415.90
*
NEW
Bei diesem Artikel handelt es sich um ein Originalersatzteil (OEM) der Firma Aprilia OEM Artikelnummer zu Vergleichszwecken : 866514 Lieferumfang: 1
Out of Stock
€14.99
*
NEW
Adjustment screw for clutch cable, Various colors, 30 mm, M10, CNC aluminum
The CNC-milled aluminum clutch adjustment screw allows you to adjust your clutch cable quickly and precisely. The large adjustment wheel allows you to adjust the clutch play cleanly and in a controlled manner – even on the road without...
Almost gone
€7.99
*
NEW
Brake hose extension, Universal item, various angles, steel braided, 10 cm, with parts certificate
This steel braided brake hose extension is the clean solution when more hose length is required due to handlebar risers or a handlebar conversion. The original brake hose remains in place and is simply extended by 10 cm . This saves you...
Almost gone
€41.95
*
NEW
This footrest extension for FRS and FRS2 footrests gives you more freedom in your seating position – without any DIY solutions. The CNC-milled multi-angle positioner allows you to move the footrest 25 mm in all directions . This allows...
Almost gone
€29.95
*
With the right parts on your brakes, chassis, frame and suspension from your Aprilia RS/RS4 125, you provide for the optimal driving experience and maximum safety.
"Who brakes later drives faster", you know. But then you should also have good brakes! Don't save at the wrong end and make sure that you regularly check the brake pads and discs on your RS/RS4 125. Brake discs on your RS/RS4 125 checks.
With the right levers and cables, you ensure a pleasant response when braking and clutching. clutch. This should not be underestimated, once you have sat in the saddle for half a day and pulled a few Hundred times on the lever has pulled, it can already be exhausting.
.
With the right fork and the optimal Stoßdämpfern on your Aprilia RS/RS4 125, you provide für your perfect comfort. Or not, if you want to have more of a sporty seat and driving feel.
Viewed