1. Choose model
RX/SX 125 (ab 2021, KT - Euro5)
SX 125 (2018 bis 2020, KXB - Euro4)
SX 125 (2008 bis 2014)
No results were found for the filter!
Motocross footpegs with widened contact area and improved grip. Made of CNC machined and anodized aluminum. The footrests are supplied together with the footrest adapters known from Radical. The rests are then bolted directly to the...
Available
€39.95
*
Brake cylinder cover Radical Racing, universal, versch. Colors, rear
Matching the various other engine styling parts from Radical Racing, herewith also comes a fully enclosing rear brake cylinder guard. incl. mounting material
Available
From €17.99
*
Aluminum fairing screws from Motoflow, in colored anodized finish. The screws are provided with wide lens head and a hexagon socket. So the fairing holds securely in place. Since it is aluminum, these screws are not suitable for high...
Available
€3.99
*
Brake & clutch lever guards are used on racing motorcycles similar to handguards on motocross bikes. However, they are intended less to protect the hands from mud and debris and more to protect the levers from a fall. That way, if the...
Available
€29.99
*
Who is looking for a lever set with ABE, or KBA approval will find it here. The majority of levers offered on the market are offered without ABE. With the TÜV, or also not rarely occurring police controls this can end fast with a...
Available
€99.95
*
;
From €69.95
*
Small, but fine detail that calls for change. With this anodized release lever you can remove the old disdainful release lever and set a chic colored accent on the engine. Absolutely high-quality product made of CNC-milled aluminum.
Available
From €14.99
*
We offer a complete set consisting of adjustable brake lever and clutch lever armature. Also included is a master cylinder for hydraulic brakes. The individual parts of the set are mostly CNC milled and have an extremely attractive...
Available
€99.90
*
;
€69.90
*
Vibration dampers are actually used to reduce vibrations in the steering tube, since these vibrations are only very slightly pronounced in the 125 class motorcycles anyway, it is not necessary to perform vibration dampers as absorber...
Available
€14.99
*
;
From €9.99
*
Fits 28.5mm handlebars. The handlebar is quite flat on this version. Of course, there is also the matching intake or the matching adapter for the standard 22mm handlebar mounts. The intake is completely CNC machined and anodized...
Available
€29.95
*
Vibration dampers are actually used to reduce vibrations in the steering tube, since these vibrations occur only very slightly on most 125s anyway, it is not necessary to design vibration dampers as absorber weights. Here we can offer...
Available
€17.99
*
;
€12.99
*
CNC machined brake fluid reservoir from Motoflow. Available in different colors.
Available
€19.95
*
CNC machined brake cylinder cover, fits on the rear master cylinder of the Aprilia RX & SX models from 2018 up, available in different colours. Delivery without seal! Aprilia OEM Part No.: Part of 2R000490
Available
€14.95
*
;
From €11.99
*
From Radical Racing we can offer different color anodized aluminum footrests. The footrests are simply exchanged against the originals. The assembly can be done within about 10 minutes.
Available
€39.95
*
Tank ventilation hose with coloured anodised end cap
Available
From €3.99
*
Spare footrest pair from Radical. Can be mounted on Radical Racing footrest adapters. Note Delivery WITHOUT footrest adapter!
Available
€22.95
*
Stand mounts are used to use motorcycle paddock stands with claw mounts. The stand holders are 2-part black and orange anodized.
Available
€12.90
*
Simple CNC milled styling part for KTM Duke or RC 125, the screw is located at the top of the clutch housing. Great optical effect for a small budget!
Available
€13.99
*
As a little gimmick we can offer a CNC manufactured adjusting screw for e.g. clutch cables. The adjusting screw fits on all vehicles with M8 adjusting device.
Out of Stock
€12.95
*
NEW
Hier haben wir neue Lenkerenden von Puig, den SPEED. Aus einem Aluminiumblock gefräst und in sieben verschiedenen Farben für euch zur auswahl. Das Design verbindet die Einfachheit der Linien und den Minimalismus des Renn Charakters mit...
Available
€29.95
*
NEW
Hier haben wir neue Lenkerenden von Puig, den SHORTY. Aus einem Aluminiumblock gefräst und in sieben verschiedenen Farben für euch zur auswahl. Das Design verbindet die Einfachheit der Linien und den Minimalismus des Renn Charakters....
Available
€29.95
*
This headlight bracket is an essential part for mounting the universal LED headlight from Puig. It is made of high-quality CNC-milled aluminum and is therefore very robust and durable. In black, it matches the headlight very well and...
Almost gone
From €145.90
*
Universal lever guard from VOCA Racing. This type of lever guards is mandatory for safety reasons in MotoGP and other categories of the world of motorcycling. They are 100% recommended for racing, but can also be used on the road. They...
Available
€69.95
*
The lever protection set serves to protect the lever from breaking or bending when falling. The set is made of sturdy aluminum and therefore provides effective protection against falls.
Out of Stock
€44.95
*
Brake cylinder Most, universal, 22mm, front, versch. Colors
MOST Racing hereby offers a radial CNC brake cylinder anodized in your favorite color! The assembly is very easy and fits all 22mm handlebars. Technical data: Type 3 or 4 fingers Adjustable Breakage protection Piston diameter 17.5 For...
Available
€99.95
*
With CNC parts you have the opportunity to create with minimal effort an individual look to your Aprilia SX 125 to create. Parts like, Öleinfüllschrauben, brake cylinder cover, chain protector or even sprocket cover & motorcycle covers from CNC are mounted or replaced in a few minutes. Even more the parts, compared with a tuning exhaust system or a größeren cubic kit, significantly cheaper.
Apart from the erwähnten points CNC optics parts offer a much higher quality appearance than the Standard parts of the SX 125. We ourselves offer our own parts from Radical Racing only after strict quality control. quality control. So in addition to fit and visual impact, we also check function! For example the brake cylinder covers have a hole to prevent a vacuum in the reservoir, just like the original cover. can arise.
In addition, there are also a variety of different colors, so you also the right CNC parts matching the color of your motorcycle have.
Viewed