1. Choose model
RX/SX 125 (ab 2021, KT - Euro5)
SX 125 (2018 bis 2020, KXB - Euro4)
SX 125 (2008 bis 2014)
2. Filter by category
No results were found for the filter!
Vibration dampers are actually used to reduce vibrations in the steering tube, since these vibrations are only very slightly pronounced in the 125 class motorcycles anyway, it is not necessary to perform vibration dampers as absorber...
Available
€14.99
*
;
From €9.99
*
Fits 28.5mm handlebars. The handlebar is quite flat on this version. Of course, there is also the matching intake or the matching adapter for the standard 22mm handlebar mounts. The intake is completely CNC machined and anodized...
Available
€29.95
*
Vibration dampers are actually used to reduce vibrations in the steering tube, since these vibrations occur only very slightly on most 125s anyway, it is not necessary to design vibration dampers as absorber weights. Here we can offer...
Available
€17.99
*
;
€12.99
*
Simple handlebar grip rubbers with optional red or black anodized sleeves on the front and rear part of the grip. The rubbers are medium soft and thus universally applicable. The assembly is quite Simpel. The indicated handlebar ends...
Available
€24.90
*
;
€15.99
*
Simple Supersport grip rubbers in medium-strength compound. Are suitable for virtually any moped and any purpose. No special features, no Schi-Schi, but an unbeatable price.
Available
€11.99
*
;
€7.99
*
Piaggio original spare part. OEM part number for comparison purposes 2R000446
Available
€17.99
*
If you change your handlebars, you usually need new grips right away. In addition, a barpad is obligatory after mounting a downhill handlebar anyway. After all, what is a nice handlebar without a nice pad? In this practical bundle we...
Available
€41.95
*
If you change your handlebars, you usually need new grips at the same time. In addition, a barpad is obligatory after mounting a downhill handlebar. After all, what is a nice handlebar without a nice pad? In this practical bundle we have...
Available
€41.95
*
This 28,5mm handlebar from Motoflow has an angled design compared to other handlebars from our range of products. It also has a slightly flatter design, which is an additional difference to other handlebars. Technical data width: 80cm...
Available
€44.90
*
;
€34.90
*
Enduro steel handlebars painted grey. Outside diameter: 22mm width: 800mm Colour: Grey Inner diameter: 19mm
Available
€39.90
*
;
€29.95
*
Styling handlebar grips from Motflow in various colours: Black base with red accents Black base with blue accents White base with black accents The assembly of handlebar grips is actually very simple. Idr. the old grips have to be cut...
Available
€13.99
*
Steel motocross handlebars with strut. Outside diameter: 22mm width: 860mm height: 140mm
Available
€20.79
*
Features Scratch-resistant screen printing with foam backing Length : 24cm
Available
€14.99
*
;
€9.99
*
As a little gimmick we can offer a CNC manufactured adjusting screw for e.g. clutch cables. The adjusting screw fits on all vehicles with M8 adjusting device.
Out of Stock
€12.95
*
Short-stroke throttle handles offer the possibility to reduce the angle of the pull to be pulled and thus the total travel. Particularly with larger carburettors from 19 mm upwards, the turning movement is significantly reduced and thus...
Available
€29.95
*
Universal downhill handlebar with fixed strut. The strut is delivered in black for all handlebars to set a color accent. Please measure your original handlebar mounts before buying the downhill handlebars. Technical data diameter : 22mm...
Available
€34.90
*
;
From €27.90
*
Handlebar grips in flame look. Grips fit quite well in the hand thanks to your mixture. Available in six different colours.
Available
€9.99
*
NEW
Lenkergriffe Domino "Snake", universell, versch. Farben
Aussergewöhnlicher Grip durch eine spezielle Oberflächenstruktur und die weiche Gummimischung. Ideal für den MX-Sport. Zudem sind drei Rillen für die Fixierung mit Draht vorhanden. 2 K. Flansch, um Daumen und Zeigefinger zu schonen kein...
Almost gone
€18.99
*
The brake lever grips from Puig are a useful addition to your moped. On the one hand, the grips look good and make your brake or clutch levers shine and on the other hand, they are a great addition for the winter. Thanks to the...
Available
€6.99
*
ProGrip presents the Double Density 719, which offer the maximum grip for your handlebars. The grips have different layers of material to optimize grip. The handlebar grips sit comfortably in the hand and offer sufficient grip even in...
Available
€19.95
*
This 28 mm handlebar from 9-Yard has a special angle that is designed for sporty or cross riding. The handlebars are wider than conventional handlebars, which gives a more stable feel for sporty riding and a better feel for the front...
Available
€59.95
*
Originalersatzteil von Aprilia. OEM Artikelnummer zu Vergleichszwecken 2B004544
Almost gone
€22.95
*
Originalersatzteil von Aprilia. OEM Artikelnummer zu Vergleichszwecken 2B007766
Out of Stock
€19.99
*
The lever protection set serves to protect the lever from breaking or bending when falling. The set is made of sturdy aluminum and therefore provides effective protection against falls.
Out of Stock
€44.95
*
Here you can find the right handlebars, grips and levers for your Aprilia SX 125. Especially the levers can be perfectly adapted to your own style with a high-quality tuning part. The handlebar grips are the parts that you constantly have in your hand and over which you have control of the motorcycle. Motorcycle, so comfort and feel are very important. In this regard, there are different rubbers. The advantage The advantage of a harder compound is that it gives a more precise ride, but it wears out more quickly. wear or crack more quickly. With a softer mixture it is then exactly the opposite.
Viewed