1. Choose model
RX/SX 125 (ab 2025, XS)
RX/SX 125 (2021 bis 2024, KT - Euro5)
SX 125 (2018 bis 2020, KXB - Euro4)
SX 125 (2008 bis 2014)
2. Filter by category
No results were found for the filter!
Rubber bearing exhaust mounting Watts, Universal, various colours
Colored rubber bearing for mounting the exhaust. It counteracts the expansion and contraction of the metal caused by heat development and thus prevents cracks in the frame or exhaust itself.
Available
€9.99
*
The Polisport Armadillo is a universal 4-stroke exhaust protector made of stainless steel and silicone. The use of elastomers reduces vibration noise and is resistant to high temperatures. The universal mounting system, with pipe clamps...
Available
€59.90
*
Replacement clamp from LeoVince made of real carbon. Fits most LV-One exhaust systems
Available
€44.95
*
Arrow replacement seal. Can be used not only with Arrow, but also with all other exhaust systems with 32mm diameter and plug-in flange. Technical data Diameter (inside): 32mm width: 30mm
Available
€10.00
*
Spare part for Arrow exhaust systems. Can also be used for exhaust systems of other manufacturers with the same diameter.
Available
€10.00
*
Replacement dB-Killer for different Arrow Thunder exhaust silencers. Please compare dimensions! Technical data length: 200mm diameter 1: 45mm diameter 2: 26mm Number of holes: 6 A single dB killer is delivered.
Available
€59.95
*
Manifold incl. catalytic converter from Arrow, suitable for Aprilia SX 125 models from 2018 onwards. The manifold can be used with the original Aprilia rear silencer, i.e. as a spare part or also with the sport silencer from Arrow. The...
Available
€315.00
*
To experience the full performance of the 125cc Aprilia engine, catalytic converters needs to be deattached from the engines exhaust Pipe. This means that the original manifold of the SX 125 must be replaced. If no catalytic converter is...
Available
€168.00
*
Available
€7.49
*
Heat protection film, multiple sizes
Self-adhesive heat protection films in various sizes and thicknesses. The film consists of a heat-resistant fibreglass fabric in combination with a thin, reflective aluminium foil and is indispensable for all plastic trim parts near the...
Available
From €5.99
*
Copper seal ring. Technical data Inner diameter: 31.50 mm Outside diameter: 40.00 mm thickness: 4 .00 mm
Almost gone
€5.95
*
Replacement graphite manifold gasket. Fits in principle all vehicles with straight flange or plug-in flange connections up to 42mm diameter. (42mm is for example the original size of the Yamaha YI-3 & YI-4 engine).
Available
€4.99
*
Aluminium/steel manifold gasket from Athena. Can be used on all vehicles with the corresponding outlet dimension of 45mm diameter.
Almost gone
€4.50
*
Available
€1.59
*
Outlet screw set, Cross/ 10 hexagon socket, M6 x 16mm (pair)
Exhaust bolt set for almost all common motorcycles. Can be mounted with a 10 mm wrench and a Phillips screwdriver. Dimensions: M6 x 16mm. Delivered are 2 pieces.
Available
€3.59
*
Graphite sealing ring from Athena. Can be used in many different vehicles as a seal for overlapping plug connections.
Available
€13.95
*
Available
€1.99
*
Copper seal ring. Inner diameter : 26,2 mm Outside diameter : 35 mm Thickness : 1,5 mm
Available
€3.99
*
Mounting rubber for exhaust systems, universal
Technical data Length pin/bolt: 53mm Diameter bolt: 8mm length rubber element: 19mm
Available
€6.49
*
Stud bolt, M6x27
Outlet stud with M6 thread on both sides. As a replacement for torn out or over-turned studs. The bolt is galvanized and has a total length of 27mm. A single bolt is supplied.
Available
€0.59
*
Exhaust stud & nuts set, M6 x M6 - 2 pieces
Again and again annoying with torn or heavily rusted exhaust bolts? With this set this problem can now be solved. The set consists of 2 bolts with the dimension M6xM6 as well as the collar nuts.
Out of Stock
€2.99
*
Exhaust stud & nuts set, M8 x M8 - 10 pieces
Again and again annoyance with torn or heavily rusted exhaust bolts? with this set from Motoflow this problem can now be solved. The set consists of 10 bolts with the dimension M8xM8 as well as the collar nuts.
Out of Stock
€12.99
*
If you want to use your Arrow exhaust 100% legally, there is no way around this Arrow sports catalytic converter. The catalytic converter offers the best exhaust values with reduced backpressure of the exhaust gas. So there are no...
Almost gone
€161.00
*
The Polisport Silencer Protector provides excellent protection for your muffler from bumps and drops and looks great doing it: Made from a blend of silicone and metal Easy to install without the need for mounting hardware The thick...
Available
€40.95
*
;
From €29.95
*
Viewed