1. Choose model
RR 125 R 4T LC (ab 2025, ZD3EH15 (Euro5+))
RR R 125 4T LC (2024 bis 2024, ZD3EH14)
RR 125 4T LC (2021 bis 2023, ZD3EH14)
RR 125 T 4T LC (ab 2025, ZD3EH110)
RR T 125 4T LC (2023 bis 2024, ZD3EH100)
RR 125 4T LC (2017 bis 2020, ZD3E9143)
RR 125 4T LC (2013 bis 2016, ZD3E4000)
No results were found for the filter!
Stand mounts, so-called "Diablos", are used to be able to use motorcycle paddock stands with claw mounts. The stand mounts are 2-part black and color anodized. Provided with 8mm mounting screw. Scope of delivery 2 pieces (pair) incl. screw
Available
€12.99
*
Stand mounts, so-called "Diablos", are used to be able to use motorcycle paddock stands with claw mounts. The stand mounts are 2-part black and color anodized. Provided with 8mm mounting screw. Scope of delivery 2 pieces (pair) incl. screw
Available
€12.99
*
Stand mounts, so-called "Diablos", are used to be able to use motorcycle paddock stands with claw mounts. The stand mounts are 2-piece black and color anodized. Provided with 10mm mounting screw. Scope of delivery 2 pieces (pair) incl....
Available
From €12.90
*
This simple but effective clamp can increase your handlebar intake on almost all bikes! made of high quality CNC aluminum Handlebar mounts for Ø22 mm handlebars Increase the handlebar by about 20mm
Available
€29.95
*
CNC machined and color anodized cover for the oil filter of Yamaha/Minarelli YI engines. Fits different vehicles. Through the attached Radical "R" icon an additional small eye-catcher on your MT 125, Beta RR or Fantic.
Available
€49.95
*
Herewith you get a color matching your bike brake fluid reservoir with CNC cap. The attachment takes place directly on the tank. The cap comes incl. seal, clamps and hose. In addition, the tank (∅42mm) has the typical level indicators...
Available
€9.99
*
With the lever protectors of Motoflow you effectively protect your levers and or hand from bending such as in a fall. The protectors are available in 2 different colors.
Available
€29.95
*
;
€20.97
*
With the Motoflow handlebar clamps you give your handlebar an extra look through the red CNC machined aluminum. Your handlebar is raised a few centimeters, which can improve posture and thus prevent back pain. Due to the inner diameter...
Available
€29.95
*
Tire valve caps from Radical Racing with a sporty and modern design.
Available
€5.49
*
Noble anodized short stroke throttle grip from Radical. Completely made of aluminium with a transparent plastic cover that allows a view of the pulley. The twist grip itself is ribbed for improved grip of the rubber grip. Universal fits...
Available
€39.95
*
Color matching, CNC milled 28.5mm handlebar mounts for the perfect finish on your bike! The mount is completely CNC machined and anodized afterwards. Available in different colors. Scope of delivery: 2pcs.
Available
€29.95
*
;
From €17.46
*
Motocross footpegs with widened contact area and improved grip. Made of CNC machined and anodized aluminum. The footrests are supplied together with the footrest adapters known from Radical. The rests are then bolted directly to the...
Available
From €35.95
*
From Radical Racing we can offer here different color anodized aluminum footpegs. The footrests are simply replaced against the originals. The assembly can be done within about 10 min. The footrests are supplied with the appropriate...
Available
€39.95
*
Simple handlebar grip rubbers with optional red or black anodized sleeves on the front and rear part of the handle. The rubbers are medium soft and thus universally applicable. The assembly is quite Simpel. The indicated handlebar ends...
Available
€20.95
*
;
€15.95
*
Matching the various other engine styling parts from Radical Racing, herewith also comes a fully enclosing rear brake cylinder guard. incl. mounting material
Available
From €14.99
*
Aluminum fairing screws from Motoflow, in colored anodized finish. The screws are provided with wide lens head and a hexagon socket. So the fairing holds securely in place. Since it is aluminum, these screws are not suitable for high...
Available
€3.99
*
Brake & clutch lever guards are used on racing motorcycles similar to handguards on motocross bikes. However, they are intended less to protect the hands from mud and debris and more to protect the levers from a fall. That way, if the...
Available
€29.99
*
CNC machined styling shift lever from Radical Racing. The lever is available in 3 different anodized colors. The folding front part of the lever is always aluminium coloured. The Radical Racing logo is printed on the side of the lever....
Available
€49.95
*
;
From €29.96
*
Who is looking for a lever set with ABE, or KBA approval will find it here. The majority of levers offered on the market for Beta RR, or other vehicles, are offered without ABE. At the TÜV, or also not rarely occurring police controls,...
Available
€104.90
*
We offer a complete set consisting of adjustable brake lever and clutch lever armature. Also included is a master cylinder for hydraulic brakes. The individual parts of the set are mostly CNC milled and have an extremely attractive...
Available
€99.90
*
;
€69.90
*
CNC machined brake fluid reservoir from Motoflow. Available in different colors.
Available
€19.95
*
;
From €15.00
*
Tank ventilation hose with coloured anodised end cap
Available
€5.99
*
;
From €3.99
*
Stand mounts are used to use motorcycle paddock stands with claw mounts. The stand holders are 2-part black and orange anodized.
Available
€12.90
*
Simple CNC milled styling part for KTM Duke or RC 125, the screw is located at the top of the clutch housing. Great optical effect for a small budget!
Available
€13.99
*
With CNC parts you have the opportunity to create with minimal effort an individual look to your Beta RR 125 4T to create. Parts like, Öleinfüllschrauben, brake cylinder cover, chain protector or even sprocket cover & motorcycle covers from CNC are mounted or replaced in a few minutes. Even more the parts, compared with a tuning exhaust system or a größeren cubic kit, significantly cheaper.
Apart from the erwähnten points CNC optics parts offer a much higher quality appearance than the Standard parts of the RR 125 4T. We ourselves offer our own parts from Radical Racing only after strict quality control. quality control. So in addition to fit and visual impact, we also check function! For example the brake cylinder covers have a hole to prevent a vacuum in the reservoir, just like the original cover. can arise.
In addition, there are also a variety of different colors, so you also the right CNC parts matching the color of your motorcycle have.
Viewed