1. Choose model
SMX 125i ABS (ab 2023)
SMX 125 (2021 bis 2022, KT - Euro5)
SMX 125 (2017 bis 2020, KX)
2. Filter by category
No results were found for the filter!
Diese großen Auspufffedern von GPR sorgen für sicheren Halt zwischen Schalldämpfer und Krümmer – ideal für Auspuffanlagen mit größerem Abstand oder flexibler Montage. Gefertigt aus robustem Federstahl, sind sie langlebig und...
Available
€16.95
*
This rubber shim from GPR serves as a protective insert for exhaust clamps and prevents scratches or vibrations between the clamp and the silencer. It has a standard length and fits all GPR exhaust clamps - simply cut to size and insert....
Available
€16.95
*
Out of Stock
€49.95
*
Some GPR exhausts have the special feature that they have an additional dB killer fitted. This dB killer is fitted BEFORE the rear silencer. It has a diameter of 54mm and is suitable for various models such as Deeptone, Furore, etc...
Out of Stock
€59.95
*
This is an aftermarket catalytic converter for MIVV exhaust systems. This fits in systems for all common Euro3 bikes. Dimensions: 100x50(52) mm
Out of Stock
€119.90
*
You want to tickle the maximum performance from your Aprilia? For this there is now a racing manifold from Arrow! No damping of the performance goes hand in hand with no catalytic converter and no ABE. This manifold is therefore only...
Available
€195.00
*
Cover cap for the mounting screw of the dB-Killer of SBK and LV-One exhaust systems.
Available
€9.99
*
Rubber bearing exhaust mounting Watts, Universal, various colours
Colored rubber bearing for mounting the exhaust. It counteracts the expansion and contraction of the metal caused by heat development and thus prevents cracks in the frame or exhaust itself.
Out of Stock
€9.99
*
The Polisport Armadillo is a universal 4-stroke exhaust protector made of stainless steel and silicone. The use of elastomers reduces vibration noise and is resistant to high temperatures. The universal mounting system, with pipe clamps...
Available
€59.90
*
Replacement clamp from LeoVince made of real carbon. Fits most LV-One exhaust systems
Available
€44.95
*
Arrow replacement seal. Can be used not only with Arrow, but also with all other exhaust systems with 32mm diameter and plug-in flange. Technical data Diameter (inside): 32mm width: 30mm
Almost gone
€10.00
*
Spare part for Arrow exhaust systems. Can also be used for exhaust systems of other manufacturers with the same diameter.
Available
€10.00
*
Replacement dB-Killer for different Arrow Thunder exhaust silencers. Please compare dimensions! Technical data length: 200mm diameter 1: 45mm diameter 2: 26mm Number of holes: 6 A single dB killer is delivered.
Available
€59.95
*
Manifold incl. catalytic converter from Arrow, suitable for Aprilia SX 125 models from 2018 onwards. The manifold can be used with the original Aprilia rear silencer, i.e. as a spare part or also with the sport silencer from Arrow. The...
Available
€315.00
*
To experience the full performance of the 125cc Aprilia engine, catalytic converters needs to be deattached from the engines exhaust Pipe. This means that the original manifold of the SX 125 must be replaced. If no catalytic converter is...
Available
€168.00
*
Available
€7.49
*
Heat protection film, multiple sizes
Self-adhesive heat protection films in various sizes and thicknesses. The film consists of a heat-resistant fibreglass fabric in combination with a thin, reflective aluminium foil and is indispensable for all plastic trim parts near the...
Available
From €5.99
*
Copper seal ring. Technical data Inner diameter: 31.50 mm Outside diameter: 40.00 mm thickness: 4 .00 mm
Available
€5.95
*
Replacement graphite manifold gasket. Fits in principle all vehicles with straight flange or plug-in flange connections up to 42mm diameter. (42mm is for example the original size of the Yamaha YI-3 & YI-4 engine).
Available
€4.99
*
Aluminium/steel manifold gasket from Athena. Can be used on all vehicles with the corresponding outlet dimension of 45mm diameter.
Available
€4.50
*
Available
€1.59
*
Outlet screw set, Cross/ 10 hexagon socket, M6 x 16mm (pair)
Exhaust bolt set for almost all common motorcycles. Can be mounted with a 10 mm wrench and a Phillips screwdriver. Dimensions: M6 x 16mm. Delivered are 2 pieces.
Available
€3.59
*
Graphite sealing ring from Athena. Can be used in many different vehicles as a seal for overlapping plug connections.
Available
€13.95
*
Viewed