Tip Use our  Bike-Filter to get only suitable articles displayed.
0 Article
 

Honda CB 125 R Brakes & Suspension

1. Choose model
CB 125 R (ab 2024, JC 95 Euro5+)
CB 125 R (2021 bis 2023, JC91 Euro5)
CB 125 R (2018 bis 2020, JC79 - Euro4)
Close filters
4 From 5
No results were found for the filter!
Outer casing throttle cable Outer casing throttle cable, universal, different colours
This inexpensive cover offers itself , in order to adapt the throttle cable in colour to your bike. Dimensions Length: 2,5m Diameter 5mm

Available

€3.99 *
Spring clutch lever Domino Spring clutch lever Domino, universal
The return spring on the clutch lever guarantees that it always springs back to its original position. If the spring is worn out, it must be replaced as quickly as possible. We offer an inexpensive alternative for this. In plug & play...

Available

€2.49 *
Brake pump front/master brake cylinder Honda OEM
Brake pump front/master brake cylinder Honda OEM, Honda CB 125 R from year 18
This item is an original spare part (OEM) of the Honda brand. OEM part number for comparison purposes 45510K26901 Scope of delivery: 1 pc.

Almost gone

€182.63 *
Honda OEM lock kit
Honda OEM lock kit, Honda CB 125 R from year 18
This item is an original spare part (OEM) of the Honda brand. OEM part number for comparison purposes 35010K98E00 Scope of delivery: 1 pc.

Out of Stock

€379.90 *
Footrest holder Honda OEM
Footrest holder Honda OEM, Honda CB 125 R from year 18, right side
This item is an original spare part (OEM) of the Honda brand. OEM part number for comparison purposes 50600K94T00 Scope of delivery: 1 pc. for driver right

Available

€129.90 *
Footrest holder Honda OEM
Footrest holder Honda OEM, Honda CB 125 R from year 18, left side
This item is an original spare part (OEM) of the Honda brand. OEM part number for comparison purposes 50700K94T00 Scope of delivery: 1 pc. for driver left

Almost gone

€129.90 *
Fork seal & dust cap set Honda OEM
Fork seal & dust cap set Honda OEM, Honda CB 125 R from year 18
This set, consisting of a dust cap and a fork seal ring is an original spare part (OEM) from Honda. For the professional repair of the fork are of course 2 stck. Needed. OEM part number for comparison 51490MKAD81, 51490MERR61

Almost gone

€32.62 *
Footrest Honda OEM
Footrest Honda OEM, Honda CB 125 R from year 18, right side
This item is an original spare part (OEM) of the Honda brand. OEM part number for comparison purposes 50660MEL000 Scope of delivery: 1 pc. for driver right

Almost gone

€79.95 *
Shift pedal rubber Honda OEM
Shift pedal rubber Honda OEM, Honda CB 125 R from year 18
This item is an original spare part (OEM) of the Honda brand. OEM part number for comparison purposes 24781KR3770, 24781MCG600 Scope of delivery: 1 pc.

Available

€5.49 *
Footrest Honda OEM
Footrest Honda OEM, Honda CB 125 R from year 18, left side
This item is an original spare part (OEM) of the Honda brand. OEM part number for comparison purposes 50665MEL000 Scope of delivery: 1 pc. for driver left

Available

€79.95 *
Brake pedal Honda
Brake pedal Honda, CB 125 R from year 18
This item is a original spare part (OEM) from the manufacturer of the Honda brand.

Available

€69.90 *
Gear lever / gear pedal Honda
Gear lever / gear pedal Honda, Honda CB 125 R ab Bj. 18
This item is a original spare part (OEM) from the manufacturer of the Honda brand.

Available

€56.95 *
Brake pads set Galfer Standard
Brake pads set Galfer Standard, Honda CB 125 R from year 18 (JC79), front
Standard brake pads from Galfer offer absolutely sufficient performance in all areas of application. The brake pad develops the best braking effect in medium to low temperature ranges, which makes it perfect for city and interurban...

Out of Stock

€24.95 *
Screw / Sprocket bolt Screw / Sprocket bolt, M6x20 (DIN933), universal, 6 stck.
In the end it is a normal M6 8.8 DIN screw. Therefore it can be used almost universally. Here we offer a set of 6 screws. Scope of delivery: 6 pcs.

Available

€10.99 *
Pack of 5 screws Pack of 5 screws, M6 x 20 mm, flat head / inside corner (Torx), stepped
Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm

Available

€9.99 *
Screw Screw, M6, with collar, pack of 4
Collar screw with M6 thread and 16mm length is idr. used as brake disk screw. But it can also be used for everything else. Thread: M6 Head: 6 Kant length: 16 mm

Available

€5.49 *
Brake pad Galfer standard
Brake pad Galfer standard, Suzuki GSX-R/S 125, Honda CB 125 R from year 18 up (JC79, Honda CBR 125 year 11-18 (JC50),...
Standard brake pads from Galfer offer absolutely sufficient performance in all areas of application. The brake pad develops the best braking effect in medium to low temperature ranges, which makes it perfect for city and interurban...

Available

€21.95 *
Screw, sprocket / brake disk Screw, sprocket / brake disk, M8 x 18 mm, flat head / hexagon socket (TX), stepped
These bolts are usually used as brake disk or sprocket bolts. Incl. dry threadlocker (blue - medium strength). Thread: M8 Head: Flat / TX Length: 18 mm

Available

€2.49 *
Sealing ring Honda OEM
Sealing ring Honda OEM, Honda CBF/CBR 125 (JC34A, JC39A, JC40A, JC50A, JC50B)
Upper dust protection sealing ring for the steering head bearing. OEM part number for comparison purposes: 53214-200-000; 53214200000

Out of Stock

€5.95 *
Clutch cable adjusting screw Domino Clutch cable adjusting screw Domino, M7, Universal
Almost universally applicable adjusting screw for clutch cables. Thread: M7 Inner diameter: 8,5 mm

Available

€5.49 *
Brake pads set EBC Standard
Brake pads set EBC Standard, Kawasaki Ninja / Z 125, rear
These EBC brake pads are provided with aramid fibres, which are 6 times stronger than steel, and of course they are completely asbestos-free. In the production of EBC generally only low-emission components are used. These materials also...

Available

€29.90 *
throttle cable adjusting screw throttle cable adjusting screw, M6, Universal
Almost universally applicable adjusting screw for throttle cables. Thread: M6 Inner diameter: 6 mm

Available

€2.99 *
Banjo bolt brake hose AJP
Banjo bolt brake hose AJP, fine thread, 0,75 x 10mm
Since the original screw can no longer be used with AJP brake calipers, we offer you here a suitable screw to order. Please take the thread dimension from the article description of the caliper.

Available

€3.59 *
Banjo bolt brake hose AJP
Banjo bolt brake hose AJP, rough, 1,25 x 10mm
Since the original screw can no longer be used with AJP brake calipers, we offer you here a suitable screw to order. Please take the thread dimension from the article description of the brake caliper.

Out of Stock

€3.99 *
4 From 5

With the right parts on your brakes, chassis, frame and suspension from your Honda CB 125 R, you provide for the optimal driving experience and maximum safety.

"Who brakes later drives faster", you know. But then you should also have good brakes! Don't save at the wrong end and make sure that you regularly check the brake pads and discs on your CB 125 R. Brake discs on your CB 125 R checks.

With the right levers and cables, you ensure a pleasant response when braking and clutching. clutch. This should not be underestimated, once you have sat in the saddle for half a day and pulled a few Hundred times on the lever has pulled, it can already be exhausting.

.

With the right fork and the optimal Stoßdämpfern on your Honda CB 125 R, you provide für your perfect comfort. Or not, if you want to have more of a sporty seat and driving feel.

Viewed