1. Choose model
CBR 125 (2011 bis 2019, JC50 - Euro3)
CBR 125 (2004 bis 2010, JC34/39)
No results were found for the filter!
For retrofitting, or as a spare part, we offer you here an exhaust decor for the Radical Racing Supermoto rear silencer (Inox , Half / Full Carbon). The decor can be easily glued to the ESD. Due to a special lamination of the film, the...
Available
€9.99
*
;
From €5.99
*
Replacement mounting plate with 2 screws. Used for mounting GP-Pro exhaust systems on Yamaha YZF-R 125 and MT 125 from Bj. 2021. But can also be used as a bracket for tinkering with all sorts of other uses. Technical data Dimensions:...
Available
€2.49
*
Stainless steel exhaust protector incl. pipe clamps for mounting on all common exhausts.
Available
€39.95
*
On most modern racetracks, a certain decibel limit must now also be observed. Standard dB-killers, however, take power away from the exhaust. For our GP Pro and Pro exhaust systems, however, we offer a simple solution. A replacement...
Out of Stock
€54.90
*
10 meters long and 50mm wide exhaust heat protection tape, available in different colors.
Available
From €24.95
*
DB-Killer lost? No problem! We have for many systems different replacement killer there. This one is a standard dB-killer in hexagonal shape, as a spare part for Pro and GP Pro exhaust systems.
Almost gone
€54.90
*
Die Racing Version des dB-Killer für deine Arrow Thunder Auspuffanlage. Der dB-Killer unterscheidet sich in der Länge vom standard dB-Killer, wodurch ein geringerer Staudruck entsteht. Durch diese Anpassung der Form verändert sich der...
Available
€49.95
*
Hierbei handelt es sich um einen Standard Ersatz dB-Killer für Arrow Thunder Auspuffe. Solltet ihr euren "verloren" haben, müsst ihn aber für den TÜV installieren und nachweisen, ist dieser der dB-Killer eurer Wahl. Maße: Länge: 200mm...
Available
€49.90
*
Simple exhaust spring, to hang the exhaust system on the cylinder, or to connect the muffler & manifold. Can also be used for other tinkering. The spring has ring eyelets at both ends. A little trickier to fit, but the hold is better!...
Available
€2.59
*
Zum Nachrüsten, oder als Ersatzteil bieten wir dir hier ein Auspuffdekor für den Radical Racing Supermoto Endschalldämpfer (Inox , Half- / Full Carbon) an. Das Dekor kann einfach auf den ESD geklebt werden. Durch eine Spezielle...
Available
€9.99
*
Exhaust systems become louder with increasing age. One reason for this is that impurities from the engine, such as combustion residues, are deposited in them. In the same way it can also happen that insulation wool comes off the exhaust...
Available
€6.99
*
Exhaust plugs are used during transport and mothballing of motorcycles to prevent rainwater from entering the exhaust system. This exhaust plug from Radical comes with a Remove before Ride Keylace.
Available
€6.99
*
Universal 125cc 4-stroke rear silencer from Motoflow. The inexpensive slip-on silencer can be mounted on virtually any 125cc & Bigbike vehicle. The muffler has a conical adapter flange, which can be cut to size according to the thickness...
Available
€99.90
*
;
€79.90
*
Spare fuse ring for the dB-Killer of the Radical GP-Carbon. Technical data Ø= 50mm
Available
€9.49
*
Locking pin/bolt suitable for Radical Racing dB-Killer "RR.020.02". In the Euro 3 version. The pin can be removed from the dB-Killer if necessary, here we offer it as a suitable spare part in case it gets lost. Delivery without shown...
Available
€13.99
*
Plug-in catalytic converter from Radical Racing. Suitable for all GP-Carbon "E3 Version" exhaust systems. Technical data diameter: 45mm Length: 60mm
Available
€99.90
*
Replacement manifold for the Radical Racing GP-Carbon & GP-Carbon Titanium exhaust, suitable for Honda CBR 125.
Available
€159.90
*
The racing version of the dB-Killer for your Radical Racing GP exhaust system. The dB-Killer differs in length from the standard dB-Killer, which results in a lower dynamic pressure. This modification of the shape changes the sound of...
Available
€54.90
*
A replacement dB-Killer for your Radical Racing GP exhaust system. Original sound and same top performance as you are used to. Scope of delivery of the dB-Killer dB-Killer Seegerring Mounting the dB-Killer The dB-Killer is simply pressed...
Available
€54.90
*
First of all heat protection tape is used to protect against burns. But especially with 2-stroke exhaust systems it even has a performance-enhancing effect. Because 2-stroke exhaust systems are very sensitive to temperature fluctuations....
Available
€14.99
*
The Mivv GP exhaust system in black is the perfect upgrade for your Honda CBR 125, with its aggressive and deep sound it gives your bike the right sound. Made of high quality material, the system offers improved performance and a better...
Almost gone
€322.90
*
The MIVV retrofit catalytic converter complies with Euro 3 exhaust/noise limits and has an integrated DB killer that ensures pleasant noise reduction. The catalytic converter is easy to install and ready for immediate use. It is...
Almost gone
€129.99
*
This is an aftermarket catalytic converter for MIVV exhaust systems. This fits in systems for all common Euro3 bikes. Dimensions: 100x50(52) mm
Out of Stock
€119.90
*
Cover cap for the mounting screw of the dB-Killer of SBK and LV-One exhaust systems.
Almost gone
€9.99
*
Viewed