1. Choose model
Z 125 (ab 2023, LP/LR)
Z 125 (2021 bis 2022, MF - Euro5)
Z 125 (2018 bis 2020, KF/LF - Euro4)
No results were found for the filter!
Stand mounts, so-called "Diablos", are used to be able to use motorcycle paddock stands with claw mounts. The stand mounts are 2-part black and color anodized. Provided with 8mm mounting screw. Scope of delivery 2 pieces (pair) incl. screw
Available
€12.99
*
Stand mounts, so-called "Diablos", are used to be able to use motorcycle paddock stands with claw mounts. The stand mounts are 2-part black and color anodized. Provided with 8mm mounting screw. Scope of delivery 2 pieces (pair) incl. screw
Available
€12.99
*
Stand mounts, so-called "Diablos", are used to be able to use motorcycle paddock stands with claw mounts. The stand mounts are 2-piece black and color anodized. Provided with 10mm mounting screw. Scope of delivery 2 pieces (pair) incl....
Available
From €12.90
*
This engine slider can be easily fitted to the engine housing of your Kawasaki and protects it in the event of a crash - and thus protects you from high costs.
Available
€34.95
*
This simple but effective clamp can increase your handlebar intake on almost all bikes! made of high quality CNC aluminum Handlebar mounts for Ø22 mm handlebars Increase the handlebar by about 20mm
Available
€29.95
*
Herewith you get a color matching your bike brake fluid reservoir with CNC cap. The attachment takes place directly on the tank. The cap comes incl. seal, clamps and hose. In addition, the tank (∅42mm) has the typical level indicators...
Available
€9.99
*
With the lever protectors of Motoflow you effectively protect your levers and or hand from bending such as in a fall. The protectors are available in 2 different colors.
Available
€29.95
*
;
€20.97
*
With the Motoflow handlebar clamps you give your handlebar an extra look through the red CNC machined aluminum. Your handlebar is raised a few centimeters, which can improve posture and thus prevent back pain. Due to the inner diameter...
Available
€29.95
*
With the Radical Racing handlebar clamps your Z125 becomes unique. The risers help you to take a more upright sitting position, which not only feels better but also helps prevent back pain. The driving experience is duch an improved...
Available
€34.95
*
;
From €27.96
*
Tire valve caps from Radical Racing with a sporty and modern design.
Available
€5.49
*
The Radical Racing brake levers for the Kawasaki Ninja and Z 125 are available in green and black. They offer precise braking performance and are made of high quality aluminum. The lever is adjustable and allows an individual adjustment...
Available
€49.95
*
;
€44.95
*
If you are often on the road with pillion or pillion, this handle is certainly something for you! You can simply attach it to your tank cap and already has your passenger another way to hold on. Included are 4 screws for mounting.
Almost gone
€49.95
*
;
€39.96
*
Noble anodized short stroke throttle grip from Radical. Completely made of aluminium with a transparent plastic cover that allows a view of the pulley. The twist grip itself is ribbed for improved grip of the rubber grip. Universal fits...
Available
€39.95
*
Motocross footpegs with widened contact area and improved grip. Made of CNC machined and anodized aluminum. The footrests are supplied together with the footrest adapters known from Radical. The rests are then bolted directly to the...
Available
€34.95
*
Color matching, CNC milled 28.5mm handlebar mounts for the perfect finish on your bike! The mount is completely CNC machined and anodized afterwards. Available in different colors. Scope of delivery: 2pcs.
Available
€29.95
*
;
From €17.46
*
Simple handlebar grip rubbers with optional red or black anodized sleeves on the front and rear part of the handle. The rubbers are medium soft and thus universally applicable. The assembly is quite Simpel. The indicated handlebar ends...
Available
€20.95
*
;
€15.95
*
Matching the various other engine styling parts from Radical Racing, herewith also comes a fully enclosing rear brake cylinder guard. incl. mounting material
Available
From €14.99
*
Aluminum fairing screws from Motoflow, in colored anodized finish. The screws are provided with wide lens head and a hexagon socket. So the fairing holds securely in place. Since it is aluminum, these screws are not suitable for high...
Available
€3.99
*
Brake & clutch lever guards are used on racing motorcycles similar to handguards on motocross bikes. However, they are intended less to protect the hands from mud and debris and more to protect the levers from a fall. That way, if the...
Available
€29.99
*
With lever sets it is particularly important with the brake lever that these parts function properly. Also the many cheap copies without ABE fulfill idr. exactly this purpose. The TÜV and a police control sees this a little...
Available
€104.90
*
We offer a complete set consisting of adjustable brake lever and clutch lever armature. Also included is a master cylinder for hydraulic brakes. The individual parts of the set are mostly CNC milled and have an extremely attractive...
Available
€99.90
*
;
€69.90
*
CNC machined brake fluid reservoir from Motoflow. Available in different colors.
Available
€19.95
*
;
From €15.00
*
Footrest adapter from Radical Racing. Suitable for Kawasaki Ninja or Z 125. Note Here it concerns only the adapters, as spare part! Footrests are not supplied!
Available
€29.95
*
;
€18.90
*
From Radical Racing we can offer different color anodized aluminum footrests. The footrests are simply exchanged against the originals. The assembly can be done within about 10 minutes and is quite simple. The footrests are delivered...
Available
€36.95
*
With CNC parts you have the opportunity to create with minimal effort an individual look to your Kawasaki Z 125 to create. Parts like, Öleinfüllschrauben, brake cylinder cover, chain protector or even sprocket cover & motorcycle covers from CNC are mounted or replaced in a few minutes. Even more the parts, compared with a tuning exhaust system or a größeren cubic kit, significantly cheaper.
Apart from the erwähnten points CNC optics parts offer a much higher quality appearance than the Standard parts of the Z 125. We ourselves offer our own parts from Radical Racing only after strict quality control. quality control. So in addition to fit and visual impact, we also check function! For example the brake cylinder covers have a hole to prevent a vacuum in the reservoir, just like the original cover. can arise.
In addition, there are also a variety of different colors, so you also the right CNC parts matching the color of your motorcycle have.
Viewed