1. Choose model
Duke 125 (ab 2024, IS DK A (Euro 5+))
Duke 125 (2021 bis 2023, IS DUKE - Euro5)
Duke 125 (2017 bis 2020, IS DUKE - Euro4)
Duke 125 (2011 bis 2016, Euro3)
2. Filter by category
No results were found for the filter!
Shift- and foot brake lever set from Motoflow, suitable for KTM Duke 125. Both levers are milled from aluminium and anodized in two colours. This makes them the perfect eyecatcher on the KTM Duke.
Available
€41.95
*
;
€26.95
*
Universal hand brake cylinder for the front disc brake. The complete fitting is delivered including brake lever and is equipped with a brake light switch. The brake cylinder is ideal for handlebar conversions and/or as an alternative...
Available
€22.95
*
Cheap part that will attract a lot of attention. This screw cap is suitable for the rear brake fluid reservoir of the KTM Duke 125, or the front reservoir of the Aprilia RS 125 and can be fitted in less than a minute. Note: The seal of...
Available
€18.95
*
;
From €8.99
*
Here we offer hand levers in a slightly shortened "Shorty" version. The levers do not affect the comfort while braking and clutch operation. Even the force to be applied during clutch operation does not have to be increased noticeably....
Available
€79.95
*
;
€39.95
*
Short-stroke throttle handles offer the possibility to reduce the angle of the pull to be pulled and thus the total travel. Particularly with larger carburettors from 19 mm upwards, the turning movement is significantly reduced and thus...
Available
€28.95
*
The universal repair set for the throttle cable and/or shift cable consists of two new cables with 2.5m length and various connections for cable attachment.
Available
€12.99
*
;
€8.79
*
NEW
Bei diesem Artikel handelt es sich um ein Originalersatzteil (OEM) der Firma KTM OEM Artikelnummer zu Vergleichszwecken : 90107050050 Lieferumfang: 1 stk.
Out of Stock
€32.95
*
NEW
This item is an original equipment manufacturer (OEM) replacement part from KTM OEM part number for comparison purposes : 96302031000 Contents: 1 pc.
Almost gone
€53.95
*
NEW
Die WP-Gabelringe von Movetronix sind eine passgenaue Ergänzung für Motorräder mit WP-Gabeln und dienen sowohl der optischen Aufwertung als auch dem Schutz im Bereich der Gabeldichtungen. Sie werden anstelle der originalen Gabelringe...
Available
€24.95
*
NEW
This item is an original equipment manufacturer (OEM) replacement part from KTM OEM part number for comparison purposes : 96303038000C1 Contents: 1
Almost gone
€94.90
*
NEW
This item is an original equipment manufacturer (OEM) replacement part from KTM OEM part number for comparison purposes : 96303039000C1 Contents: 1
Almost gone
€94.90
*
NEW
This item is an original equipment manufacturer (OEM) replacement part from KTM OEM part number for comparison purposes : 28002090000 Contents: 1
Almost gone
€36.95
*
NEW
JMC Entlüfternippel M8x1.25 – hochwertiges Ersatzteil zum einfachen Entlüften von Bremsanlagen und hydraulischen Systemen. Gefertigt aus robustem Material und in verschiedenen Farbvarianten erhältlich, sorgt der Entlüfternippel für...
Available
€18.99
*
NEW
This item is an original equipment manufacturer (OEM) replacement part from KTM OEM part number for comparison purposes : KTM-96302090000 Contents: 1
Almost gone
€22.95
*
NEW
Das RCB S-2 Line Federbein ist die neueste Generation der bewährten S-Serie und wurde speziell für Motorräder ab 250 ccm entwickelt. Gegenüber der vorherigen S-2 Line verfügt diese Version über einen internen Floating Piston (IFP), der...
Out of Stock
€189.90
*
Adjustment screw for clutch cable, Various colors, 30 mm, M10, CNC aluminum
The CNC-milled aluminum clutch adjustment screw allows you to adjust your clutch cable quickly and precisely. The large adjustment wheel allows you to adjust the clutch play cleanly and in a controlled manner – even on the road without...
Available
€7.99
*
Brake hose extension, Universal item, various angles, steel braided, 10 cm, with parts certificate
This steel braided brake hose extension is the clean solution when more hose length is required due to handlebar risers or a handlebar conversion. The original brake hose remains in place and is simply extended by 10 cm . This saves you...
Available
€41.95
*
This footrest extension for FRS and FRS2 footrests gives you more freedom in your seating position – without any DIY solutions. The CNC-milled multi-angle positioner allows you to move the footrest 25 mm in all directions . This allows...
Out of Stock
€29.95
*
Brakepump-lever set, Universal, front, without ABE
The universal radial brake pump for the front brake is the ideal solution if you want to significantly increase braking performance while achieving a clean racing look on the cockpit. The combination of brake lever and radial master...
Out of Stock
€78.90
*
The CNC-milled brake cylinder cover from VOCA features precise workmanship and a robust aluminum housing that is significantly more durable than many standard covers. The anodized surface provides reliable protection against corrosion...
Available
€13.99
*
This item is an original spare part from the KTM brand. OEM number for comparison purposes: 90101000010
Out of Stock
€69.95
*
No more fear of thieves! With the TNT Protech alarm system , you can reliably protect your scooter or motorcycle. The compact system can be used universally and can be installed on almost any 12V electrical system - whether scooter, 50cc...
Almost gone
€29.99
*
Short-stroke throttle set, universal, 22mm, black
More throttle, less travel - with this short-stroke throttle grip you get a more direct response on your moped! The set comes complete with black rubber grips and fits all 22 mm handlebars. Simply fit and twist. Ideal for anyone who...
Available
€31.95
*
This item is an original spare part from the KTM brand. OEM number for comparison purposes: 90103038000
Almost gone
€89.95
*
With the right parts on your brakes, chassis, frame and suspension from your KTM Duke 125, you provide for the optimal driving experience and maximum safety.
"Who brakes later drives faster", you know. But then you should also have good brakes! Don't save at the wrong end and make sure that you regularly check the brake pads and discs on your Duke 125. Brake discs on your Duke 125 checks.
With the right levers and cables, you ensure a pleasant response when braking and clutching. clutch. This should not be underestimated, once you have sat in the saddle for half a day and pulled a few Hundred times on the lever has pulled, it can already be exhausting.
.
With the right fork and the optimal Stoßdämpfern on your KTM Duke 125, you provide für your perfect comfort. Or not, if you want to have more of a sporty seat and driving feel.
Viewed