1. Choose model
Duke 125 (ab 2024, IS DK A (Euro 5+))
Duke 125 (2021 bis 2023, IS DUKE - Euro5)
Duke 125 (2017 bis 2020, IS DUKE - Euro4)
Duke 125 (2011 bis 2016, Euro3)
2. Filter by category
No results were found for the filter!
Some GPR exhausts have the special feature that they have an additional dB killer fitted. This dB killer is fitted BEFORE the rear silencer. It has a diameter of 54mm and is suitable for various models such as Deeptone, Furore, etc...
Out of Stock
€59.95
*
This article is an original spare part (OEM) from KTM OEM part number for comparison purposes : 93805011000 Scope of delivery: 1
Almost gone
€35.95
*
Standard gasket (copper) for the exhaust manifold. OEM part number for comparison purposes 18291MN5650 Replaces part numbers: 18291216000; 182912160000; 18291306000; 18291HA7710; 18291KE5000; 18291KE8000; 18291KGAE00; 18291KSP901;...
Available
€3.99
*
The Mivv Racing replacement manifold is the ideal choice if you want to increase the performance of your motorcycle. With this high-quality replacement part, you can replace the original manifold for improved performance and riding...
Almost gone
€119.90
*
This is an aftermarket catalytic converter for MIVV exhaust systems. This fits in systems for all common Euro3 bikes. Dimensions: 100x50(52) mm
Almost gone
€119.90
*
Cover cap for the mounting screw of the dB-Killer of SBK and LV-One exhaust systems.
Almost gone
€9.99
*
This exhaust manifold is special in that it has a "stealth mode" ^^ In the recess for the catalytic converter, none is installed. Someone who does not look closely, so it thinks a catalytic converter is installed and it is an approved...
Almost gone
€530.00
*
This Arrow manifold for your Duke is a racing variant. This means that it is not approved for driving on public roads. Without a catalytic converter, it produces noticeably more sound and power, but also more emissions, which means that...
Almost gone
€356.00
*
Replacement clamp from LeoVince made of real carbon. According to the manufacturer, fits most LV-One and LV Pro exhaust systems for KTM models, such as the 14185E .
Almost gone
€44.95
*
DB-Killer lost? Happens! This is a replacement killer, suitable for Shark Factory exhausts on KTM models. As the old one was taken out, this one is installed. According to Shark, the dB- killer fits in any factory exhaust. Check the...
Almost gone
€44.95
*
Rubber bearing exhaust mounting Watts, Universal, various colours
Colored rubber bearing for mounting the exhaust. It counteracts the expansion and contraction of the metal caused by heat development and thus prevents cracks in the frame or exhaust itself.
Available
€9.99
*
The Polisport Armadillo is a universal 4-stroke exhaust protector made of stainless steel and silicone. The use of elastomers reduces vibration noise and is resistant to high temperatures. The universal mounting system, with pipe clamps...
Available
€59.90
*
Arrow replacement seal. Can be used not only with Arrow, but also with all other exhaust systems with 32mm diameter and plug-in flange. Technical data Diameter (inside): 32mm width: 30mm
Almost gone
€10.00
*
Spare part for Arrow exhaust systems. Can also be used for exhaust systems of other manufacturers with the same diameter.
Available
€10.00
*
Replacement dB-Killer for different Arrow Thunder exhaust silencers. Please compare dimensions! Technical data length: 200mm diameter 1: 45mm diameter 2: 26mm Number of holes: 6 A single dB killer is delivered.
Available
€59.95
*
Replacement dB-Killer for different LeoVince LV One exhaust silencers.
Available
€45.95
*
Available
€7.49
*
Heat protection film, multiple sizes
Self-adhesive heat protection films in various sizes and thicknesses. The film consists of a heat-resistant fibreglass fabric in combination with a thin, reflective aluminium foil and is indispensable for all plastic trim parts near the...
Available
From €5.99
*
Copper seal ring. Technical data Inner diameter: 31.50 mm Outside diameter: 40.00 mm thickness: 4 .00 mm
Available
€5.95
*
Replacement graphite manifold gasket. Fits in principle all vehicles with straight flange or plug-in flange connections up to 42mm diameter. (42mm is for example the original size of the Yamaha YI-3 & YI-4 engine).
Available
€4.99
*
Aluminium/steel manifold gasket from Athena. Can be used on all vehicles with the corresponding outlet dimension of 45mm diameter.
Available
€4.50
*
Available
€1.59
*
Outlet screw set, Cross/ 10 hexagon socket, M6 x 16mm (pair)
Exhaust bolt set for almost all common motorcycles. Can be mounted with a 10 mm wrench and a Phillips screwdriver. Dimensions: M6 x 16mm. Delivered are 2 pieces.
Available
€3.59
*
Viewed