1. Choose model
RC 125 (ab 2024, Euro5+)
RC 125 (2022 bis 2023, Euro5)
RC 125 (2017 bis 2020, Euro4)
RC 125 (2014 bis 2016, Euro3)
2. Filter by category
No results were found for the filter!
Cover cap for the mounting screw of the dB-Killer of SBK and LV-One exhaust systems.
Available
€9.99
*
DB-Killer lost? Happens! This is a replacement killer, according to the manufacturer suitable for Leo Vince EVO ONE exhausts for the KTM RC 125 Bj. 14-16 and the Yamaha YZF-R 125 RE06. As the old one was taken out, this one is installed....
Available
€49.95
*
Replacement clamp from LeoVince made of real carbon. According to the manufacturer, fits most LV-One and LV Pro exhaust systems for KTM models, such as the 14185E .
Available
€44.95
*
DB-Killer lost? Happens! This is a replacement killer, suitable for Shark Factory exhausts on KTM models. As the old one was taken out, this one is installed. According to Shark, the dB- killer fits in any factory exhaust. Check the...
Almost gone
€44.95
*
Rubber bearing exhaust mounting Watts, Universal, various colours
Colored rubber bearing for mounting the exhaust. It counteracts the expansion and contraction of the metal caused by heat development and thus prevents cracks in the frame or exhaust itself.
Almost gone
€9.99
*
The Polisport Armadillo is a universal 4-stroke exhaust protector made of stainless steel and silicone. The use of elastomers reduces vibration noise and is resistant to high temperatures. The universal mounting system, with pipe clamps...
Available
€59.90
*
;
€41.93
*
This is the front manifold or decat pipe made of stainless steel (aisi 304). It is a pure RACING part to remove the original catalytic converter and improve performance. This item is a universal product that can be used with all GPR RC...
Almost gone
€179.90
*
;
€99.92
*
Spare part for Arrow exhaust systems. Can also be used for exhaust systems of other manufacturers with the same diameter.
Almost gone
€10.00
*
Arrow replacement seal. Can be used not only with Arrow, but also with all other exhaust systems with 32mm diameter and plug-in flange. Technical data Diameter (inside): 32mm width: 30mm
Available
€10.00
*
Replacement dB-Killer for different Arrow Thunder exhaust silencers. Please compare dimensions! Technical data length: 200mm diameter 1: 45mm diameter 2: 26mm Number of holes: 6 A single dB killer is delivered.
Available
€59.95
*
Available
€6.99
*
Heat protection film, multiple sizes
Self-adhesive heat protection films in various sizes and thicknesses. The film consists of a heat-resistant fibreglass fabric in combination with a thin, reflective aluminium foil and is indispensable for all plastic trim parts near the...
Available
From €5.99
*
Copper seal ring. Technical data Inner diameter: 31.50 mm Outside diameter: 40.00 mm thickness: 4 .00 mm
Available
€5.95
*
Replacement graphite manifold gasket. Fits in principle all vehicles with straight flange or plug-in flange connections up to 42mm diameter. (42mm is for example the original size of the Yamaha YI-3 & YI-4 engine).
Available
€4.99
*
Aluminium/steel manifold gasket from Athena. Can be used on all vehicles with the corresponding outlet dimension of 45mm diameter.
Out of Stock
€4.50
*
Available
€1.59
*
Outlet screw set, Cross/ 10 hexagon socket, M6 x 16mm (pair)
Exhaust bolt set for almost all common motorcycles. Can be mounted with a 10 mm wrench and a Phillips screwdriver. Dimensions: M6 x 16mm. Delivered are 2 pieces.
Almost gone
€3.59
*
Graphite sealing ring from Athena. Can be used in many different vehicles as a seal for overlapping plug connections.
Available
€13.95
*
Available
€1.99
*
Single rear muffler from Arrow, without connecting pipe for KTM Duke & RC 125 and 390- from 2017 on, for mounting the connecting pipe with the part number: 71675MI is mandatory . With the article: DUKE125-390-AR-1 , we have conveniently...
Almost gone
€291.00
*
Arrow Thunder spare or single rear muffler for KTM Duke & RC 125 / 390 from 2017 onwards. For mounting this rear muffler an intermediate pipe (71667MI for RC or 71675MI for Duke) is required. We have already combined this with the rear...
Almost gone
€235.00
*
Connecting pipe, for mounting Arrow rear mufflers on the KTM RC 125 (from 2017).
Available
€103.00
*
Single Arrow intermediate pipe incl. catalyst. & mounting kit.
Almost gone
€376.00
*
;
€300.80
*
Mounting rubber for exhaust systems, universal
Technical data Length pin/bolt: 53mm Diameter bolt: 8mm length rubber element: 19mm
Available
€6.49
*
Viewed